scholarly journals Fast Hyperparameter Calibration of Sparsity Enforcing Penalties in Total Generalised Variation Penalised Reconstruction Methods for XCT Using a Planted Virtual Reference Image

Mathematics ◽  
2021 ◽  
Vol 9 (22) ◽  
pp. 2960
Author(s):  
Stéphane Chrétien ◽  
Camille Giampiccolo ◽  
Wenjuan Sun ◽  
Jessica Talbott

The reconstruction problem in X-ray computed tomography (XCT) is notoriously difficult in the case where only a small number of measurements are made. Based on the recently discovered Compressed Sensing paradigm, many methods have been proposed in order to address the reconstruction problem by leveraging inherent sparsity of the object’s decompositions in various appropriate bases or dictionaries. In practice, reconstruction is usually achieved by incorporating weighted sparsity enforcing penalisation functionals into the least-squares objective of the associated optimisation problem. One such penalisation functional is the Total Variation (TV) norm, which has been successfully employed since the early days of Compressed Sensing. Total Generalised Variation (TGV) is a recent improvement of this approach. One of the main advantages of such penalisation based approaches is that the resulting optimisation problem is convex and as such, cannot be affected by the possible existence of spurious solutions. Using the TGV penalisation nevertheless comes with the drawback of having to tune the two hyperparameters governing the TGV semi-norms. In this short note, we provide a simple and efficient recipe for fast hyperparameters tuning, based on the simple idea of virtually planting a mock image into the model. The proposed trick potentially applies to all linear inverse problems under the assumption that relevant prior information is available about the sought for solution, whilst being very different from the Bayesian method.

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 591
Author(s):  
Manasavee Lohvithee ◽  
Wenjuan Sun ◽  
Stephane Chretien ◽  
Manuchehr Soleimani

In this paper, a computer-aided training method for hyperparameter selection of limited data X-ray computed tomography (XCT) reconstruction was proposed. The proposed method employed the ant colony optimisation (ACO) approach to assist in hyperparameter selection for the adaptive-weighted projection-controlled steepest descent (AwPCSD) algorithm, which is a total-variation (TV) based regularisation algorithm. During the implementation, there was a colony of artificial ants that swarm through the AwPCSD algorithm. Each ant chose a set of hyperparameters required for its iterative CT reconstruction and the correlation coefficient (CC) score was given for reconstructed images compared to the reference image. A colony of ants in one generation left a pheromone through its chosen path representing a choice of hyperparameters. Higher score means stronger pheromones/probabilities to attract more ants in the next generations. At the end of the implementation, the hyperparameter configuration with the highest score was chosen as an optimal set of hyperparameters. In the experimental results section, the reconstruction using hyperparameters from the proposed method was compared with results from three other cases: the conjugate gradient least square (CGLS), the AwPCSD algorithm using the set of arbitrary hyperparameters and the cross-validation method.The experiments showed that the results from the proposed method were superior to those of the CGLS algorithm and the AwPCSD algorithm using the set of arbitrary hyperparameters. Although the results of the ACO algorithm were slightly inferior to those of the cross-validation method as measured by the quantitative metrics, the ACO algorithm was over 10 times faster than cross—Validation. The optimal set of hyperparameters from the proposed method was also robust against an increase of noise in the data and can be applicable to different imaging samples with similar context. The ACO approach in the proposed method was able to identify optimal values of hyperparameters for a dataset and, as a result, produced a good quality reconstructed image from limited number of projection data. The proposed method in this work successfully solves a problem of hyperparameters selection, which is a major challenge in an implementation of TV based reconstruction algorithms.


Author(s):  
Guang-Hong Chen ◽  
Jie Tang ◽  
Brian Nett ◽  
Zhihua Qi ◽  
Shuai Leng ◽  
...  

2018 ◽  
Vol 615 ◽  
pp. A59 ◽  
Author(s):  
M. A. Duval-Poo ◽  
M. Piana ◽  
A. M. Massone

Aims. Compressed sensing realized by means of regularized deconvolution and the finite isotropic wavelet transform is effective and reliable in hard X-ray solar imaging. Methods. The method uses the finite isotropic wavelet transform with the Meyer function as the mother wavelet. Furthermore, compressed sensing is realized by optimizing a sparsity-promoting regularized objective function by means of the fast iterative shrinkage-thresholding algorithm. Eventually, the regularization parameter is selected by means of the Miller criterion. Results. The method is applied against both synthetic data mimicking measurements made with the Spectrometer/Telescope Imaging X-rays (STIX) and experimental observations provided by the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The performances of the method are qualitatively validated by comparing some morphological properties of the reconstructed sources with those of the corresponding synthetic configurations. Furthermore, the results concerning experimental data are compared with those obtained by applying other visibility-based reconstruction methods. Conclusions. The results show that when the new method is applied to synthetic STIX visibility sets, it provides reconstructions with a spatial accuracy comparable to the accuracy provided by the most popular method in hard X-ray solar imaging and with a higher spatial resolution. Furthermore, when it is applied to experimental RHESSI data, the reconstructions are characterized by reliable photometry and by a notable reduction of the ringing effects caused by the instrument point spread function.


2015 ◽  
Vol 60 (4) ◽  
pp. 2663-2670
Author(s):  
P. Matysik ◽  
M. Chojnacki ◽  
S. Jóźwiak ◽  
T. Czujko ◽  
S. Lipiński

In this paper the possibility of using X-ray computed tomography (CT) in quantitative metallographic studies of homogeneous and composite materials is presented. Samples of spheroidal cast iron, Fe-Ti powder mixture compact and epoxy composite reinforced with glass fibers, were subjected to comparative structural tests. Volume fractions of each of the phase structure components were determined by conventional methods with the use of a scanning electron microscopy (SEM) and X-ray diffraction (XRD) quantitative analysis methods. These results were compared with those obtained by the method of spatial analysis of the reconstructed CT image. Based on the comparative analysis, taking into account the selectivity of data verification methods and the accuracy of the obtained results, the authors conclude that the method of computed tomography is suitable for quantitative analysis of several types of structural materials.


Sign in / Sign up

Export Citation Format

Share Document