scholarly journals Advances and Applications of Hollow Fiber Nanofiltration Membranes: A Review

Membranes ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 890
Author(s):  
Tim Sewerin ◽  
Maria G. Elshof ◽  
Sonia Matencio ◽  
Marcel Boerrigter ◽  
Jimmy Yu ◽  
...  
Keyword(s):  
Drinking Water ◽  
Hollow Fiber ◽  
Municipal Wastewater ◽  
Industrial Applications ◽  
Global Market ◽  
Special Focus ◽  
Extreme Conditions ◽  
Nanofiltration Membranes ◽  
Separation Layers ◽  
Spiral Wound

Hollow fiber nanofiltration (NF) membranes have gained increased attention in recent years, partly driven by the availability of alternatives to polyamide-based dense separation layers. Moreover, the global market for NF has been growing steadily in recent years and is expected to grow even faster. Compared to the traditional spiral-wound configuration, the hollow fiber geometry provides advantages such as low fouling tendencies and effective hydraulic cleaning possibilities. The alternatives to polyamide layers are typically chemically more stable and thus allow operation and cleaning at more extreme conditions. Therefore, these new NF membranes are of interest for use in a variety of applications. In this review, we provide an overview of the applications and emerging opportunities for these membranes. Next to municipal wastewater and drinking water processes, we have put special focus on industrial applications where hollow fiber NF membranes are employed under more strenuous conditions or used to recover specific resources or solutes.

Physical cleaning efficacy of hollow fiber nanofiltration membranes in drinking water applications

2017 ◽  
Vol 63 ◽  
pp. 15-23 ◽  
Author(s):  
Analita Payant ◽  
Pierre R. Bérubé ◽  
Benoit Barbeau
Keyword(s):  
Drinking Water ◽  
Hollow Fiber ◽  
Nanofiltration Membranes ◽  
Cleaning Efficacy

High-Flux Fine Hollow Fiber Nanofiltration Membranes for the Purification of Drinking Water

2021 ◽  
Vol 60 (4) ◽  
pp. 1817-1828
Author(s):  
Peng Gao ◽  
Sun-Jie Xu ◽  
Zhen-Liang Xu ◽  
Ping Li ◽  
Yu-Zhe Wu ◽  
...  
Keyword(s):  
Drinking Water ◽  
Hollow Fiber ◽  
High Flux ◽  
Nanofiltration Membranes

scholarly journals Current Status and Future Trend of Dominant Commercial Reverse Osmosis Membranes

Membranes ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 906
Author(s):  
Masaru Kurihara
Keyword(s):  
Reverse Osmosis ◽  
Hollow Fiber ◽  
Water Solution ◽  
Cellulose Triacetate ◽  
Future Trend ◽  
Global Market ◽  
Water Desalination ◽  
Current Status ◽  
Membrane Process ◽  
Spiral Wound

Since 2000, seawater reverse osmosis method has been a dominant desalination technology against the distillation method in the global market. The large project called “Mega-SWRO” (half mega-ton per day and larger) plant in the Middle East is quite popular making full use of the combination with solar energy. Today, the price of desalinated water is affordable at as low as $0.28/m3 to $0.53/m3. Likewise, dominant commercial reverse osmosis membrane is a cross-linked fully aromatic polyamide composite membrane-spiral wound element including FT-30 (DuPont Water Solution) and UTC-80 (Toray Industries., Inc., Otsu, Shiga, Japan). The said membranes are much superior in terms of performance compared to the cellulose triacetate membranes-hollow fiber for variety of applications including seawater desalinations, brackish water desalination, wastewater reuse, ultra-pure production for semiconductor, home-use water purifier, etc. SWCC of Saudi Arabia has announced that it intends to shift from cellulose triacetate hollow fiber to spiral wound RO membranes at all of its plants. Furthermore, the state-sponsored R&D on membrane and membrane process has been put into practice in major countries, including Japan and Korea, which contributed to the progress of membrane science and membrane process, suitable for spiral-wound polyamide membranes. SWCC has announced their plans for SWRO, mainly focusing on brine mining to obtain precious materials from the brine of SWRO. New and innovative brine-mining technology has been introduced for green desalination.

Enterovirus Concentration Using Automated Hollow Fiber Ultrafiltration

1982 ◽  
Vol 14 (4-5) ◽  
pp. 257-272 ◽  
Author(s):  
G Belfort ◽  
A Paluszek ◽  
L S Sturman
Keyword(s):  
Drinking Water ◽  
Hollow Fiber ◽  
Enhanced Recovery ◽  
Tap Water ◽  
Membrane Surface ◽  
Creeping Flow ◽  
Hollow Fibers ◽  
Virus Concentration ◽  
Concentration Technique ◽  
Solution Interface

The Automated Hollow Fiber Ultrafiltration (AHFU) method is proposed here as a simple, efficient and rapid virus concentration technique from tap and drinking water sources. The results reported here extend the testing of the AHFU method to include two Picornaviruses [Poliovirus 2 (vaccine) and Echovirus 1] and Reovirus 3. Their respective mean virus recoveries from between 3 and 100 l of tap water is 88 ± 26, 79 ± 60, and 104 ± 48%. Various approaches including membrane surface modification, changes in backwash hydrodynamics, modification of the feed and backwash composition, and the use of S35-methionine labelled Poliovirus 2, are used to study the recovery of sorbed Poliovirus 2 from the hollow fiber/solution interface. An increase in the backwash pH to between 9.5 and 10.5 significantly improved Poliovirus 2 recovery. This, together with the labelled experiments, indicates that the virus-membrane interactions are probably electrostatic in nature. Convective polarization during filtration probably brings the virus close enough to the surface for these interactions to occur since virus losses were not detected for a non-permeation recycle experiment. Because very low Reynold's numbers are used, the flow is in the creeping-flow-regime for both filtration and backwashing (axial and radial). Unless significantly higher Reynolds could be used, enhanced recovery due to purely hydrodynamic forces is unlikely. High Reynold's numbers, of course, are limited by the pressure constraints of the hollow fibers.

scholarly journals Comparative Assessment of Tubular Ceramic, Spiral Wound, and Hollow Fiber Membrane Microfiltration Module Systems for Milk Protein Fractionation

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 692
Author(s):  
Roland Schopf ◽  
Florian Schmidt ◽  
Johanna Linner ◽  
Ulrich Kulozik
Keyword(s):  
Hollow Fiber ◽  
Milk Protein ◽  
Hollow Fiber Membrane ◽  
Comparative Assessment ◽  
Transmission Factor ◽  
Transmembrane Pressure ◽  
Protein Fractionation ◽  
Flow Conditions ◽  
Local Pressure ◽  
Spiral Wound

The fractionation efficiency of hollow fiber membranes (HFM) for milk protein fractionation was compared to ceramic tubular membranes (CTM) and spiral wound membranes (SWM). HFM combine the features of high membrane packing density of SWM and the more defined flow conditions and better control of membrane fouling in the open flow channel cross-sections of CTM. The aim was to comparatively analyze the effect of variations in local pressure and flow conditions while using single industrially sized standard modules with similar dimensions and module footprints (module diameter and length). The comparative assessment with varied transmembrane pressure was first applied for a constant feed volume flow rate of 20 m3 h−1 and, secondly, with the same axial pressure drop along the modules of 1.3 bar m−1, similar to commonly applied crossflow velocity and wall shear stress conditions at the industrial level. Flux, transmission factor of proteins (whey proteins and serum caseins), and specific protein mass flow per area membrane and per volume of module installed were determined as the evaluation criteria. The casein-to-whey protein ratios were calculated as a measure for protein fractionation effect. Results obtained show that HFM, which so far are under-represented as standard module types in industrial dairy applications, appear to be a competitive alternative to SWM and CTM for milk protein fractionation.

Designing scalable dual-layer composite hollow fiber nanofiltration membranes with fully cross-linked ultrathin functional layer

2021 ◽  
pp. 119243
Author(s):  
Zhen-Yuan Wang ◽  
Yi-Chen Wang ◽  
Wei-Jian Wang ◽  
Sheng-Nan Tao ◽  
Ya-Feng Chen ◽  
...  
Keyword(s):  
Hollow Fiber ◽  
Nanofiltration Membranes ◽  
Functional Layer ◽  
Layer Composite

scholarly journals Functionalized Carbon Nanotubes (CNTs) for Water and Wastewater Treatment: Preparation to Application

2021 ◽  
Vol 13 (10) ◽  
pp. 5717
Author(s):  
Mian Muhammad-Ahson Aslam ◽  
Hsion-Wen Kuo ◽  
Walter Den ◽  
Muhammad Usman ◽  
Muhammad Sultan ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Wastewater Treatment ◽  
Water Resources ◽  
Large Scale ◽  
Industrial Applications ◽  
Biological Species ◽  
Special Focus ◽  
Water And Wastewater Treatment ◽  
Adsorption Sites ◽  
Water And Wastewater

As the world human population and industrialization keep growing, the water availability issue has forced scientists, engineers, and legislators of water supply industries to better manage water resources. Pollutant removals from wastewaters are crucial to ensure qualities of available water resources (including natural water bodies or reclaimed waters). Diverse techniques have been developed to deal with water quality concerns. Carbon based nanomaterials, especially carbon nanotubes (CNTs) with their high specific surface area and associated adsorption sites, have drawn a special focus in environmental applications, especially water and wastewater treatment. This critical review summarizes recent developments and adsorption behaviors of CNTs used to remove organics or heavy metal ions from contaminated waters via adsorption and inactivation of biological species associated with CNTs. Foci include CNTs synthesis, purification, and surface modifications or functionalization, followed by their characterization methods and the effect of water chemistry on adsorption capacities and removal mechanisms. Functionalized CNTs have been proven to be promising nanomaterials for the decontamination of waters due to their high adsorption capacity. However, most of the functional CNT applications are limited to lab-scale experiments only. Feasibility of their large-scale/industrial applications with cost-effective ways of synthesis and assessments of their toxicity with better simulating adsorption mechanisms still need to be studied.

scholarly journals Two-Side Laser Processing Method for Producing High Aspect Ratio Microholes

2017 ◽  
Vol 5 (4) ◽  
Author(s):  
Vahid Nasrollahi ◽  
Pavel Penchev ◽  
Stefan Dimov ◽  
Lars Korner ◽  
Richard Leach ◽  
...  
Keyword(s):  
Cross Sections ◽  
Laser Processing ◽  
Industrial Applications ◽  
Laser Drilling ◽  
Special Focus ◽  
Geometrical Accuracy ◽  
Aspect Ratios ◽  
Wide Range ◽  
High Flexibility ◽  
Accuracy And Repeatability

Laser microprocessing is a very attractive option for a growing number of industrial applications due to its intrinsic characteristics, such as high flexibility and process control and also capabilities for noncontact processing of a wide range of materials. However, there are some constrains that limit the applications of this technology, i.e., taper angles on sidewalls, edge quality, geometrical accuracy, and achievable aspect ratios of produced structures. To address these process limitations, a new method for two-side laser processing is proposed in this research. The method is described with a special focus on key enabling technologies for achieving high accuracy and repeatability in two-side laser drilling. The pilot implementation of the proposed processing configuration and technologies is discussed together with an in situ, on-machine inspection procedure to verify the achievable positional and geometrical accuracy. It is demonstrated that alignment accuracy better than 10 μm is achievable using this pilot two-side laser processing platform. In addition, the morphology of holes with circular and square cross sections produced with one-side laser drilling and the proposed method was compared in regard to achievable aspect ratios and holes' dimensional and geometrical accuracy and thus to make conclusions about its capabilities.

Sign in / Sign up

Export Citation Format

Share Document