Important Approaches to Enhance Reverse Osmosis (RO) Thin Film Composite (TFC) Membranes Performance

Thin film composite (TFC) membrane, which consists of polyamide (PA) active film rests on porous support layer, has been the major type of reverse osmosis (RO) membrane since its development by Cadotte in the 1970s, and has been remarkably used to produce clean water for human consumption and domestic utilization. In the past 30 years, different approaches have been exploited to produce the TFC membrane with high water flux, excellent salt rejection, and better chlorine/fouling resistance. In this brief review, we classify the techniques that have been utilized to improve the RO-TFC membrane properties into four categories: (1) Using alternative monomers to prepare the active layer; (2) modification of membrane surface; (3) optimization of polymerization reactions; and (4) incorporation of nanoparticles (NPs) into the membrane PA layer. This review can provide insights to guide future research and further propel the RO TFN membrane.

Download Full-text

Antifouling Property of Oppositely Charged Titania Nanosheet Assembled on Thin Film Composite Reverse Osmosis Membrane for Highly Concentrated Oily Saline Water Treatment

Membranes ◽

10.3390/membranes10090237 ◽

2020 ◽

Vol 10 (9) ◽

pp. 237

Author(s):

Nor Akalili Ahmad ◽

Pei Sean Goh ◽

Abdul Karim Zulhairun ◽

Ahmad Fauzi Ismail

Keyword(s):

Thin Film ◽

Wastewater Treatment ◽

Reverse Osmosis ◽

Saline Water ◽

High Concentration ◽

Saline Wastewater ◽

Film Composite ◽

Thin Film Composite ◽

Tfc Membrane ◽

Ro Membrane

With the blooming of oil and gas industries, oily saline wastewater treatment becomes a viable option to resolve the oily water disposal issue and to provide a source of water for beneficial use. Reverse osmosis (RO) has been touted as a promising technology for oily saline wastewater treatment. However, one great challenge of RO membrane is fouling phenomena, which is caused by the presence of hydrocarbon contents in the oily saline wastewater. This study focuses on the fabrication of antifouling RO membrane for accomplishing simultaneous separation of salt and oil. Thin film nanocomposite (TFN) RO membrane was formed by the layer by layer (LbL) assembly of positively charged TNS (pTNS) and negatively charged TNS (nTNS) on the surface of thin film composite (TFC) membrane. The unique features, rendered by hydrophilic TNS bilayer assembled on TFC membrane in the formation of a hydration layer to enhance the fouling resistance by high concentration oily saline water while maintaining the salt rejection, were discussed in this study. The characterization findings revealed that the surface properties of membrane were improved in terms of surface hydrophilicity, surface roughness, and polyamide(PA) cross-linking. The TFC RO membrane coated with 2-bilayer of TNS achieved >99% and >98% for oil and salt rejection, respectively. During the long-term study, the 2TNS-PA TFN membrane outperformed the pristine TFC membrane by exhibiting high permeability and much lower fouling propensity for low to high concentration of oily saline water concentration (1000 ppm, 5000 ppm and 10,000 ppm) over a 960 min operation. Meanwhile, the average permeability of uncoated TFC membrane could only be recovered by 95.7%, 89.1% and 82.9% for 1000 ppm, 5000 ppm and 10,000 ppm of the oily saline feedwater, respectively. The 2TNS-PA TFN membrane achieved almost 100% flux recovery for three cycles by hydraulic washing.

Download Full-text