scholarly journals Engineering Zymomonas mobilis for the Production of Xylonic Acid from Sugarcane Bagasse Hydrolysate

2021 ◽  
Vol 9 (7) ◽  
pp. 1372
Author(s):  
Christiane Ribeiro Janner Herrera ◽  
Vanessa Rodrigues Vieira ◽  
Tiago Benoliel ◽  
Clara Vida Galrão Corrêa Carneiro ◽  
Janice Lisboa De Marco ◽  
...  
Keyword(s):  
Sugarcane Bagasse ◽  
Zymomonas Mobilis ◽  
Xylose Reductase ◽  
Value Added ◽  
Agricultural Residue ◽  
Sugarcane Bagasse Hydrolysate ◽  
Reductase Gene ◽  
Xylonic Acid ◽  
Shake Flasks ◽  
First Time

Sugarcane bagasse is an agricultural residue rich in xylose, which may be used as a feedstock for the production of high-value-added chemicals, such as xylonic acid, an organic acid listed as one of the top 30 value-added chemicals on a NREL report. Here, Zymomonas mobilis was engineered for the first time to produce xylonic acid from sugarcane bagasse hydrolysate. Seven coding genes for xylose dehydrogenase (XDH) were tested. The expression of XDH gene from Paraburkholderia xenovorans allowed the highest production of xylonic acid (26.17 ± 0.58 g L−1) from 50 g L−1 xylose in shake flasks, with a productivity of 1.85 ± 0.06 g L−1 h−1 and a yield of 1.04 ± 0.04 gAX/gX. Deletion of the xylose reductase gene further increased the production of xylonic acid to 56.44 ± 1.93 g L−1 from 54.27 ± 0.26 g L−1 xylose in a bioreactor. Strain performance was also evaluated in sugarcane bagasse hydrolysate as a cheap feedstock, which resulted in the production of 11.13 g L−1 xylonic acid from 10 g L−1 xylose. The results show that Z. mobilis may be regarded as a potential platform for the production of organic acids from cheap lignocellulosic biomass in the context of biorefineries.

scholarly journals Assessing the Potential of Newly Isolated Pichia Fermentans for Xylitol Production Using Non-Detoxified Xylose Rich Pre-Hydrolysate Derived from Sugarcane Bagasse

2020 ◽  
Author(s):  
Ashish A Prabhu ◽  
Ekkarin Bosakornranut ◽  
Yassin Amraoui ◽  
Deepti Agarwal ◽  
Frederic Coulon ◽  
...  
Keyword(s):  
Sugarcane Bagasse ◽  
Type Strain ◽  
Shake Flask ◽  
Wild Type Strain ◽  
Xylose Reductase ◽  
Value Added ◽  
Xylitol Production ◽  
Wild Type ◽  
Conversion Yield ◽  
Cell Factories

Abstract Background: Integrated management of hemicellulosic fraction and its economical transformation to value-added products is the key driver towards sustainable second-generation biorefineries. In this aspect microbial cell factories are harnessed for sustainable production of biochemicals by valorising C5 and C6 sugars generated from agro-industrial waste. However, most of the strains can effectively consume C6 sugars but lacks pentose metabolism pathway. The effective utilization of both pentose and hexose sugars is key for economical biorefinery. Results: In the current study, the ability of a newly isolated xylose assimilating Pichia fermentans was explored for xylitol production. The wild type strain robustly grew on xylose and produced xylitol with >40% conversion yield. Mutagenesis with ethyl methanesulphonate (EMS) yielded seven mutants. The mutant obtained after 15 min exposure, exhibited best xylose bioconversion efficiency. This mutant under shake flask conditions produced maximum xylitol titre and yield of 34.0 g/L and 0.68 g/g, respectively. oweverHoHHHoHowever, under same conditions, the control wild type strain accumulated 27.0 g/L xylitol with a conversion yield of 0.45 g/g. Improved performance of the mutant was attributed to 34.6% activity enhancement in xylose reductase with simultaneous reduction of xylitol dehydrogenase activity by 22.9%. Later, the culture medium was optimized using statistical design and validated at shake flask and bioreactor level. Bioreactor studies affirmed the competence of mutant in xylitol accumulation. The xylitol titre and yield obtained with pure xylose were 98.9 g/L and 0.67 g/g, respectively while xylitol produced using non-detoxified xylose rich pre-hydrolysate from sugarcane bagasse was 79.0 g/L with an overall yield of 0.54 g/g. Conclusion: This study established the potential of P. fermentans in successfully valorising the hemicellulosic fraction for sustainable xylitol production.

scholarly journals Xylitol Production: Identification and Comparison of New Producing Yeasts

2019 ◽  
Vol 7 (11) ◽  
pp. 484 ◽  
Author(s):  
Carneiro ◽  
de Paula e Silva ◽  
Almeida
Keyword(s):  
Sugarcane Bagasse ◽  
Defined Medium ◽  
Screening Strategy ◽  
Production Performance ◽  
Xylitol Production ◽  
Chemical Route ◽  
Sugarcane Bagasse Hydrolysate ◽  
Food Industries ◽  
High Efficient ◽  
First Time

Xylitol is a sugar alcohol with five carbons that can be used in the pharmaceutical and food industries. It is industrially produced by chemical route; however, a more economical and environmentally friendly production process is of interest. In this context, this study aimed to select wild yeasts able to produce xylitol and compare their performance in sugarcane bagasse hydrolysate. For this, 960 yeast strains, isolated from soil, wood, and insects have been prospected and selected for the ability to grow on defined medium containing xylose as the sole carbon source. A total of 42 yeasts was selected and their profile of sugar consumption and metabolite production were analyzed in microscale fermentation. The six best xylose-consuming strains were molecularly identified as Meyerozyma spp. The fermentative kinetics comparisons on defined medium and on sugarcane bagasse hydrolysate showed physiological differences among these strains. Production yields vary from YP/S = 0.25 g/g to YP/S = 0.34 g/g in defined medium and from YP/S = 0.41 g/g to YP/S = 0.60 g/g in the hydrolysate. Then, the xylitol production performance of the best xylose-consuming strain obtained in the screening, which was named M. guilliermondii B12, was compared with the previously reported xylitol producing yeasts M. guilliermondii A3, Spathaspora sp. JA1, and Wickerhamomyces anomalus 740 in sugarcane bagasse hydrolysate under oxygen-limited conditions. All the yeasts were able to metabolize xylose, but W. anomalus 740 showed the highest xylitol production yield, reaching a maximum of 0.83 g xylitol/g of xylose in hydrolysate. The screening strategy allowed identification of a new M. guilliermondii strain that efficiently grows in xylose even in hydrolysate with a high content of acetic acid (~6 g/L). In addition, this study reports, for the first time, a high-efficient xylitol producing strain of W. anomalus, which achieved, to the best of our knowledge, one of the highest xylitol production yields in hydrolysate reported in the literature.

scholarly journals Valorization of sugarcane bagasse by chemical pretreatment and enzyme mediated deconstruction

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Vihang S. Thite ◽  
Anuradha S. Nerurkar
Keyword(s):  
Cell Wall ◽  
Sugarcane Bagasse ◽  
Structural Changes ◽  
Enzymatic Saccharification ◽  
Dry Weight ◽  
Gravimetric Analysis ◽  
Chemical Pretreatment ◽  
Cell Wall Degrading Enzymes ◽  
First Time ◽  
Soluble Components

Abstract After chemical pretreatment, improved amenability of agrowaste biomass for enzymatic saccharification needs an understanding of the effect exerted by pretreatments on biomass for enzymatic deconstruction. In present studies, NaOH, NH4OH and H2SO4 pretreatments effectively changed visible morphology imparting distinct fibrous appearance to sugarcane bagasse (SCB). Filtrate analysis after NaOH, NH4OH and H2SO4 pretreatments yielded release of soluble reducing sugars (SRS) in range of ~0.17–0.44%, ~0.38–0.75% and ~2.9–8.4% respectively. Gravimetric analysis of pretreated SCB (PSCB) biomass also revealed dry weight loss in range of ~25.8–44.8%, ~11.1–16.0% and ~28.3–38.0% by the three pretreatments in the same order. Release of soluble components other than SRS, majorly reported to be soluble lignins, were observed highest for NaOH followed by H2SO4 and NH4OH pretreatments. Decrease or absence of peaks attributed to lignin and loosened fibrous appearance of biomass during FTIR and SEM studies respectively further corroborated with our observations of lignin removal. Application of commercial cellulase increased raw SCB saccharification from 1.93% to 38.84%, 25.56% and 9.61% after NaOH, H2SO4 and NH4OH pretreatments. Structural changes brought by cell wall degrading enzymes were first time shown visually confirming the cell wall disintegration under brightfield, darkfield and fluorescence microscopy. The microscopic evidence and saccharification results proved that the chemical treatment valorized the SCB by making it amenable for enzymatic saccharification.

scholarly journals Extraction of sugarcane bagasse arabinoxylan, integrated with enzymatic production of xylo-oligosaccharides and separation of cellulose

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Leila Khaleghipour ◽  
Javier A. Linares-Pastén ◽  
Hamid Rashedi ◽  
Seyed Omid Ranaei Siadat ◽  
Andrius Jasilionis ◽  
...  
Keyword(s):  
Sugarcane Bagasse ◽  
Sugar Content ◽  
Value Added ◽  
Apparent Molecular Weight ◽  
Bacillus Halodurans ◽  
Glycoside Hydrolase Family ◽  
High Concentration ◽  
Enzymatic Production ◽  
Successful Separation ◽  
Ft Ir

AbstractSugarcane processing roughly generates 54 million tonnes sugarcane bagasse (SCB)/year, making SCB an important material for upgrading to value-added molecules. In this study, an integrated scheme was developed for separating xylan, lignin and cellulose, followed by production of xylo-oligosaccharides (XOS) from SCB. Xylan extraction conditions were screened in: (1) single extractions in NaOH (0.25, 0.5, or 1 M), 121 °C (1 bar), 30 and 60 min; (2) 3 × repeated extraction cycles in NaOH (1 or 2 M), 121 °C (1 bar), 30 and 60 min or (3) pressurized liquid extractions (PLE), 100 bar, at low alkalinity (0–0.1 M NaOH) in the time and temperature range 10–30 min and 50–150 °C. Higher concentration of alkali (2 M NaOH) increased the xylan yield and resulted in higher apparent molecular weight of the xylan polymer (212 kDa using 1 and 2 M NaOH, vs 47 kDa using 0.5 M NaOH), but decreased the substituent sugar content. Repeated extraction at 2 M NaOH, 121 °C, 60 min solubilized both xylan (85.6% of the SCB xylan), and lignin (84.1% of the lignin), and left cellulose of high purity (95.8%) in the residuals. Solubilized xylan was separated from lignin by precipitation, and a polymer with β-1,4-linked xylose backbone substituted by arabinose and glucuronic acids was confirmed by FT-IR and monosaccharide analysis. XOS yield in subsequent hydrolysis by endo-xylanases (from glycoside hydrolase family 10 or 11) was dependent on extraction conditions, and was highest using xylan extracted by 0.5 M NaOH, (42.3%, using Xyn10A from Bacillus halodurans), with xylobiose and xylotriose as main products. The present study shows successful separation of SCB xylan, lignin, and cellulose. High concentration of alkali, resulted in xylan with lower degree of substitution (especially reduced arabinosylation), while high pressure (using PLE), released more lignin than xylan. Enzymatic hydrolysis was more efficient using xylan extracted at lower alkaline strength and less efficient using xylan obtained by PLE and 2 M NaOH, which may be a consequence of polymer aggregation, via remaining lignin interactions.

scholarly journals Synthesis of ZSM-5 zeolites from biomass power plant ash for removal of ionic dyes from aqueous solution: equilibrium isotherm, kinetic and thermodynamic analysis

RSC Advances ◽  
2021 ◽  
Vol 11 (36) ◽  
pp. 22365-22375
Author(s):  
Guangbing Liang ◽  
Yanhong Li ◽  
Chun Yang ◽  
Xun Hu ◽  
Qingyin Li ◽  
...  
Keyword(s):  
Power Plant ◽  
Performance Testing ◽  
Value Added ◽  
Adsorption Performance ◽  
Original Intention ◽  
Power Plant Ash ◽  
Kinetic And Thermodynamic Analysis ◽  
Biomass Power Plant ◽  
First Time ◽  
Plant Ash

In this work, industrial biomass power plant ash was used to synthesize the ZSM-5 zeolites for the first time with the original intention to turn value-added material into wealth, and then committed to adsorption performance testing.

Sign in / Sign up

Export Citation Format

Share Document