scholarly journals Rippite, K2(Nb,Ti)2(Si4O12)O(O,F), a New K-Nb-Cyclosilicate from Chuktukon Carbonatite Massif, Chadobets Upland, Krasnoyarsk Territory, Russia

Minerals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1102
Author(s):  
Victor V. Sharygin ◽  
Anna G. Doroshkevich ◽  
Yurii V. Seryotkin ◽  
Nikolai S. Karmanov ◽  
Elena V. Belogub ◽  
...  
Keyword(s):  
Mineral Assemblage ◽  
Structural Type ◽  
Cell Parameters ◽  
Nonlinear Properties ◽  
Primary Mineral ◽  
Carbonate Fluorapatite ◽  
Mohs Hardness ◽  
Synthetic Phase ◽  
Raman And Ir Spectroscopy ◽  
Outermost Zone

Rippite K2(Nb,Ti)2(Si4O12)(O,F)2, a new K-Nb-cyclosilicate, has been discovered in calciocarbonatites from the Chuktukon massif (Chadobets upland, SW Siberian Platform, Krasnoyarsk Territory, Russia). It was found in a primary mineral assemblage, which also includes calcite, fluorcalciopyrochlore, tainiolite, fluorapatite, fluorite, Nb-rich rutile, olekminskite, K-feldspar, Fe-Mn–dolomite and quartz. Goethite, francolite (Sr-rich carbonate–fluorapatite) and psilomelane (romanèchite ± hollandite) aggregates as well as barite, monazite-(Ce), parisite-(Ce), synchysite-(Ce) and Sr-Ba-Pb-rich keno-/hydropyrochlore are related to a stage of metasomatic (hydrothermal) alteration of carbonatites. The calcite–dolomite coexistence assumes crystallization temperature near 837 °C for the primary carbonatite paragenesis. Rippite is tetragonal: P4bm, a = 8.73885(16), c = 8.1277(2) Å, V = 620.69(2) Å3, Z = 2. It is closely identical in the structure and cell parameters to synthetic K2Nb2(Si4O12)O2 (or KNbSi2O7). Similar to synthetic phase, the mineral has nonlinear properties. Some optical and physical properties for rippite are: colorless; Mohs’ hardness—4–5; cleavage—(001) very perfect, (100) perfect to distinct; density (meas.)—3.17(2) g/cm3; density (calc.)—3.198 g/cm3; optically uniaxial (+); ω = 1.737-1.739; ε = 1.747 (589 nm). The empirical formula of the holotype rippite (mean of 120 analyses) is K2(Nb1.90Ti0.09Zr0.01)[Si4O12](O1.78OH0.12F0.10). Majority of rippite prismatic crystals are weakly zoned and show Ti-poor composition K2(Nb1.93Ti0.05Zr0.02)[Si4O12](O1.93F0.07). Raman and IR spectroscopy, and SIMS data indicate very low H2O content (0.09–0.23 wt %). Some grains may contain an outermost zone, which is enriched in Ti (+Zr) and F, up to K2(Nb1.67Ti0.32Zr0.01)[Si4O12](O1.67F0.33). It strongly suggests the incorporation of (Ti,Zr) and F in the structure of rippite via the isomorphism Nb5+ + O2− → (Ti,Zr)4+ + F1−. The content of a hypothetical end-member K2Ti2[Si4O12]F2 may be up to 17 mol. %. Rippite represents a new structural type among [Si4O12]-cyclosilicates because of specific type of connection of the octahedral chains and [Si4O12]8− rings. In structural and chemical aspects it seems to be in close with the labuntsovite-supergroup minerals, namely with vuoriyarvite-(K), K2(Nb,Ti)2(Si4O12)(O,OH)2∙4H2O.

Arisite-(La), a new REE-fluorcarbonate mineral from the Aris phonolite (Namibia), with descriptions of the crystal structures of arisite-(La) and arisite-(Ce)

2010 ◽  
Vol 74 (2) ◽  
pp. 257-268 ◽  
Author(s):  
P. C. Piilonen ◽  
A. M. McDonald ◽  
J. D. Grice ◽  
M. A. Cooper ◽  
U. Kolitsch ◽  
...  
Keyword(s):  
Crystal Structures ◽  
Direct Methods ◽  
Lemon Yellow ◽  
Chemical Zoning ◽  
Cell Parameters ◽  
Conchoidal Fracture ◽  
Mohs Hardness ◽  
Synthetic Phase ◽  
Miarolitic Cavities ◽  
Range Of Values

AbstractArisite-(La), ideally NaLa2(CO3)2[F2x(CO3)1–x]F, is a new layered REE-fluorcarbonate mineral from miarolitic cavities within the Aris phonolite, Namibia (IMA no. 2009-019). It occurs as distinct chemical zones mixed with its Ce-analogue, arisite-(Ce). Crystals are vitreous, transparent beige, beige-yellow, light lemon-yellow to pinkish, and occur as tabular prisms up to 1.5 mm. Arisite-(La) is brittle, has conchoidal fracture, poor cleavage perpendicular to (001), a Mohs hardness of ~3–3½, is not fluorescent in either long- or shortwave UV radiation, dissolves slowly in dilute HCl at room temperature and sinks in methylene iodide, Dcalc. = 4.072 g cm–3. Arisite-(La) is uniaxial negative, has sharp extinction, with both ω and ε exhibiting a range of values within each grain: ω = 1.696–1.717(4) and ε = 1.594–1.611(3), a result of chemical zoning attributed to both Ce ⇌ La and Na ⇌ Ca substitutions. The crystal structure of both arisite-(Ce) and arisite-(La) were solved by direct methods and refined to R = 1.66%, wR2 = 4.31% (Ce) and R = 2.09%, wR2 = 5.26% (La), respectively. Arisite is hexagonal, Pm2, Z = 1, with unit-cell parameters of a = 5.1109(2) Å, c = 8.6713(4) Å, V = 196.16(6) Å3 for arisite-(Ce), and a = 5.1131(7) Å, c = 8.6759(17) Å, V = 196.43(5) Å3 for arisite-(La). Arisite-(Ce) and arisite-(La) are members of the layered, flat-lying REE-fluorcarbonate group which have crystal structures characterized by separate layers of triangular planar groups that parallel the overall layering of the structure, F, REE and alkali or alkaline-earthelements. Overall, the arisite structure can be defined by three distinct layers which parallel (001): (1) ∞[REE(CO3)2F] slabs, (2) sheets of Naϕ9 polyhedra, and (3) ∞[2F/CO3]2–. Based on its (M+F)/C ratio, arisite can further be described as having a dense, flat-lying fluorcarbonate structure, a classification which includes the structurally related mineral species cordylite, kukharenkoite, cebaite, lukechangite, huanghoite, and one incompletely characterized synthetic phase, NaY2(CO3)3F.

Liudongshengite, Zn4Cr2(OH)12(CO3)·3H2O, a new mineral of the hydrotalcite supergroup, from the 79 mine, Gila County, Arizona, USA

2021 ◽  
Vol 59 (4) ◽  
pp. 763-769
Author(s):  
Hexiong Yang ◽  
Ronald B. Gibbs ◽  
Cody Schwenk ◽  
Xiande Xie ◽  
Xiangping Gu ◽  
...  
Keyword(s):  
Unit Cell ◽  
New Mineral ◽  
Unit Cell Parameters ◽  
Cell Parameters ◽  
New Mineral Species ◽  
General Chemical ◽  
Perfect Cleavage ◽  
Mohs Hardness ◽  
Trivalent Cations ◽  
Positively Charged

ABSTRACT A new mineral species, liudongshengite, ideally Zn4Cr2(OH)12(CO3)·3H2O, has been found in the 79 mine, Gila County, Arizona, USA. It occurs as micaceous aggregates or hexagonal platy crystals (up to 0.10 × 0.10 × 0.01 mm). The mineral is pinkish and transparent with white streak and vitreous luster. It is brittle and has a Mohs hardness of ∼1.5, with perfect cleavage on (001). No twinning or parting is observed macroscopically. The measured and calculated densities are 2.95 (3) and 3.00 g/cm3, respectively. Optically, liudongshengite is uniaxial (−), with ω = 1.720 (8), ε = 1.660 (7) (white light). An electron microprobe analysis, combined with the carbon content measured using an elemental combustion system equipped with mass spectrometry, yielded the empirical formula (Zn3.25Mg0.17Cr2.58)Σ6.00(OH)12(CO3)1.29·3H2O, based on (M2+ + M3+) = 6 apfu, where M2+ and M3+ are divalent and trivalent cations, respectively. Liudongshengite belongs to the quintinite group within the hydrotalcite supergroup and is the Cr-analogue of zaccagnaite-3R, Zn4Al2(OH)12(CO3)·3H2O. It is trigonal, with space group Rm and unit-cell parameters a = 3.1111(4), c = 22.682(3) Å, and V = 190.12(4) Å3. The crystal structure of liudongshengite is composed of positively charged brucite-like layers, [M2+1–xM3+x(OH)2]x+, alternating with negatively charged layers of (CO3)2–·3H2O. Compared to other minerals in the quintinite group, liudongshengite is remarkably enriched in M3+, with an M2+:M3+ ratio of 1.33:1. Like zaccagnaite-3R and many other hydrotalcite-type minerals, liudongshengite may also possess polytypes, as a series of synthetic hydrotalcite-type compounds with a general chemical formula [Zn4Cr2(OH)12]X2·4H2O, where X = Cl–, NO3–, or ½ SO42–, but with unit-cell parameters different from those for liudongshengite, have been reported previously.

Kenoplumbomicrolite, (Pb,□)2Ta2O6[□,(OH),O], a new mineral from Ploskaya, Kola Peninsula, Russia

2018 ◽  
Vol 82 (5) ◽  
pp. 1049-1055 ◽  
Author(s):  
Daniel Atencio ◽  
Marcelo B. Andrade ◽  
Luca Bindi ◽  
Paola Bonazzi ◽  
Matteo Zoppi ◽  
...  
Keyword(s):  
Kola Peninsula ◽  
Northern Region ◽  
Complete Characterization ◽  
New Mineral ◽  
X Ray Diffraction ◽  
International Mineralogical Association ◽  
Cell Parameters ◽  
Mohs Hardness

ABSTRACTThis study presents a complete characterization of kenoplumbomicrolite, (Pb,□)2Ta2O6[□,(OH),O], occurring in an amazonite pegmatite from Ploskaya Mountain, Western Keivy Massif, Kola Peninsula, Murmanskaja Oblast, Northern Region, Russia.Kenoplumbomicrolite occurs in yellowish brown octahedral, cuboctahedral and massive crystals, up to 20 cm, has a white streak, a greasy lustre and is translucent. The Mohs hardness is ~6. Attempts to measure density (7.310–7.832 g/cm3) were affected by the ubiquitous presence of uraninite inclusions. Reflectance values were measured in air and immersed in oil. Kenoplumbocrolite is optically isotropic. The empirical formula is (Pb1.30□0.30Ca0.29Na0.08U0.03)Σ2.00(Ta0.82Nb0.62Si0.23Sn4+0.15Ti0.07Fe3+0.10Al0.01)Σ2.00O6[□0.52(OH)0.25O0.23]Σ1.00 (from the crystal used for the structural study) and (Pb1.33□0.66Mn0.01)Σ2.00(Ta0.87Nb0.72Sn4+0.18Fe3+0.11W0.08Ti0.04)Σ2.00O6[□0.80(OH)0.10O0.10]Σ1.00 (average including additional fragments). The mineral is cubic, space group Fd$\overline 3 $m. The unit-cell parameters refined from powder X-ray diffraction data are a = 10.575(2) Å and V = 1182.6(8) Å3, which are in accord with those obtained previously from a single crystal of a = 10.571(1) Å, V = 1181.3(2) Å3 and Z = 8. The mineral description and its name have been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA2015-007a).

scholarly journals Nixonite, Na2Ti6O13, a new mineral from a metasomatized mantle garnet pyroxenite from the western Rae Craton, Darby kimberlite field, Canada

2019 ◽  
Vol 104 (9) ◽  
pp. 1336-1344
Author(s):  
Chiara Anzolini ◽  
Fei Wang ◽  
Garrett A. Harris ◽  
Andrew J. Locock ◽  
Dongzhou Zhang ◽  
...  
Keyword(s):  
Spectroscopic Analysis ◽  
Mantle Xenoliths ◽  
New Mineral ◽  
Monoclinic Space Group ◽  
Calculated Density ◽  
Cell Parameters ◽  
Garnet Pyroxenite ◽  
Mohs Hardness ◽  
Kimberlite Field ◽  
Metasomatized Mantle

Abstract Nixonite (IMA 2018-133), ideally Na2Ti6O13, is a new mineral found within a heavily metasomatized pyroxenite xenolith from the Darby kimberlite field, beneath the west-central Rae Craton, Canada. It occurs as microcrystalline aggregates, 15 to 40 μm in length. Nixonite is isostructural with jeppeite, K2Ti6O13, with a structure consisting of edge- and corner-shared titanium-centered octahedra that enclose alkali-metal ions. The Mohs hardness is estimated to be between 5 and 6 by comparison to jeppeite, and the calculated density is 3.51(1) g/cm3. Electron microprobe wavelength-dispersive spectroscopic analysis (average of 6 points) yielded: Na2O 6.87, K2O 5.67, CaO 0.57, TiO2 84.99, V2O3 0.31, Cr2O3 0.04, MnO 0.01, Fe2O3 0.26, SrO 0.07, total 98.79 wt%. The empirical formula, based on 13 O atoms, is: (Na1.24K0.67Ca0.06)Σ1.97(Ti5.96V0.023Fe0.018)Σ6.00O13 with minor amounts of Cr and Mn. Nixonite is monoclinic, space group C2/m, with unit-cell parameters a = 15.3632(26) Å, b = 3.7782(7) Å, c = 9.1266(15) Å, β = 99.35(15)°, and V = 522.72(1) Å3, Z = 2. Based on the average of seven integrated multi-grain diffraction images, the strongest diffraction lines are [dobs in Å (I in %) (hkl)]: 3.02 (100) (310), 3.66 (75) (110), 7.57 (73) (200), 6.31 (68) (201), 2.96 (63) (311), 2.96 (63) (203), and 2.71 (62) (402). The five main Raman peaks of nixonite, in order of decreasing intensity, are at 863, 280, 664, 135, and 113 cm–1. Nixonite is named after Peter H. Nixon, a renowned scientist in the field of kimberlites and mantle xenoliths. Nixonite occurs within a pyroxenite xenolith in a kimberlite, in association with rutile, priderite, perovskite, freudenbergite, and ilmenite. This complex Na-K-Ti-rich metasomatic mineral assemblage may have been produced by a fractionated Na-rich kimberlitic melt that infiltrated a mantle-derived garnet pyroxenite and reacted with rutile during kimberlite crystallization.

Meieranite, Na2Sr3MgSi6O17, a New Mineral from the Wessels Mine, Kalahari Manganese Fields, South Africa

2019 ◽  
Vol 57 (4) ◽  
pp. 457-466 ◽  
Author(s):  
Hexiong Yang ◽  
Xiangping Gu ◽  
Robert T. Downs ◽  
Stanley H. Evans ◽  
Jaco J. Van Nieuwenhuizen ◽  
...  
Keyword(s):  
South Africa ◽  
Empirical Formula ◽  
Microprobe Analysis ◽  
New Mineral ◽  
Cell Parameters ◽  
New Mineral Species ◽  
General Chemical ◽  
Northern Cape ◽  
Coupled Substitution ◽  
Mohs Hardness

Abstract A new mineral species, meieranite, ideally Na2Sr3MgSi6O17, has been found in the Wessels mine, Kalahari Manganese Fields, Northern Cape Province, South Africa. It occurs in isolated aggregates embedded in a matrix mainly of sugilite, along with minor aegirine and pectolite. Crystals of meieranite are up to 0.5 × 0.5 × 0.4 mm in size. No twinning is observed. The mineral is light blue to blue in transmitted and under incident lights, transparent with white streak, and has vitreous luster. It is brittle and has a Mohs hardness of 5.5; cleavage is good on {010} and no parting was observed. The measured and calculated densities are 3.41(3) and 3.410 g/cm3, respectively. Optically, meieranite is biaxial (–), with α = 1.610(1), β = 1.623(1), γ = 1.630(1) (white light), 2V (meas.) = 70(1)°, 2V (calc.) = 72°. The calculated compatibility index based on the empirical formula is –0.007 (superior). An electron microprobe analysis yields an empirical formula (based on 17 O apfu) of Na1.96(Sr2.91Ba0.03Ca0.03Pb0.02)Σ2.99(Mg0.62Mn0.28Co0.07Fe0.01)Σ0.98Si6.03O17, which can be simplified to Na2Sr3MgSi6O17. Meieranite is orthorhombic, with space group P21nb and unit-cell parameters a 7.9380(2), b 10.4923(3), c 18.2560(6) Å, and V 1520.50(8) Å3. Its crystal structure is characterized by two kinds of layers that alternate along [010]: layers of corner-sharing SiO4 and M2+O4 tetrahedra (M2+ = Mg, Mn, Co, Fe) and layers of NaO6 and SrO8 polyhedra. The tetrahedral layers consist of eight-, five-, and four-membered rings and are composed of [Si6O17] ribbons (parallel to [101]) linked together by MO4 tetrahedra. Most remarkably, the structure of meieranite is topologically identical to that of the nordite group of minerals, which has the general chemical formula Na3SrR3+M2+Si6O17, where R = Ce and La and M = Zn, Fe, and Mn. Accordingly, chemically, meieranite may be obtained through the coupled substitution of 2Sr2+ for (Na+ + R3+) in nordite.

Cuatrocapaite-(NH4) and cuatrocapaite-(K), two new minerals from the Torrecillas mine, Iquique Province, Chile, related to lucabindiite and gajardoite

2019 ◽  
Vol 83 (5) ◽  
pp. 741-748 ◽  
Author(s):  
Anthony R. Kampf ◽  
Nikita V. Chukanov ◽  
Gerhard Möhn ◽  
Maurizio Dini ◽  
Arturo A. Molina Donoso ◽  
...  
Keyword(s):  
General Formula ◽  
White Light ◽  
Electron Microprobe ◽  
Dominant Species ◽  
Empirical Formulas ◽  
Secondary Alteration ◽  
Cell Parameters ◽  
Layer Sequence ◽  
Mohs Hardness

AbstractThe new minerals cuatrocapaite-(NH4) (IMA2018-083) and cuatrocapaite-(K) (IMA2018-084) are the NH4- and K-dominant members of a series with the general formula (NH4,K)3(NaMg□)(As2O3)6Cl6·16H2O. Both minerals were found at the Torrecillas mine, Iquique Province, Chile, where they occur as secondary alteration phases. Both minerals occur as hexagonal tablets up to ~0.3 mm in diameter. They are transparent, with a vitreous lustre and white streak. For both, the Mohs hardness isca. 2½, the crystals are somewhat flexible, but not elastic, the fracture is irregular and the cleavage is perfect on {001}. The measured densities are 2.65(2) and 2.76(2) g/cm3for the NH4- and K-dominant species, respectively. Optically, cuatrocapaite-(NH4) is uniaxial (–) with ω = 1.779(3) andε= 1.541(3) and cuatrocapaite-(K) is uniaxial (–) with ω = 1.777(3) andε= 1.539(3) (white light). The minerals are insoluble in acids, but decompose in NaOH(aq). The empirical formulas, determined from electron-microprobe analyses, are (NH4)2.48Na1.66Mg0.87K0.09(As12O18.05)Cl5.88·16.02H2O and K2.68Na1.33Mg0.93(NH4)0.31(As12O18.01)Cl6.16·16.04H2O. The minerals are trigonal, space groupR${\bar 3}$m; the cuatrocapaite-(NH4) cell parameters area= 5.25321(19),c= 46.6882(19) Å,V= 1115.80(9) Å3andZ= 1; the cuatrocapaite-(K) cell parameters area= 5.2637(15),c= 46.228(8) Å,V= 1109.2(7) Å3andZ= 1. The structures, refined for cuatrocapaite-(NH4) toR1= 1.78% for 544Io> 2σIreflections, contain four types of layers: (1) a planar neutral As2O3(arsenite) sheet; (2) an (${\rm NH}_{\rm 4}^{\vskip -2pt\rm \scale65% +} $,K+) layer that links adjacent arsenite sheets; (3) a Cl–layer placed on the As side of each arsenite; and (4) a layer containing partially occupied Na, Mg and H2O sites that is flanked on either side by Cl layers. The layer sequence for the type 1, 2 and 3 layers is identical to the Cl–As2O3–K–As2O3–Cl layer sequence in the structures of lucabindiite and gajardoite.

Bassoite, SrV3O7·4H2O, a new mineral from Molinello mine, Val Graveglia, eastern Liguria, Italy

2011 ◽  
Vol 75 (5) ◽  
pp. 2677-2686 ◽  
Author(s):  
L. Bindi ◽  
C. Carbone ◽  
R. Cabella ◽  
G. Lucchetti
Keyword(s):  
Structure Refinement ◽  
Full Professor ◽  
New Mineral ◽  
Monoclinic Space Group ◽  
Calculated Density ◽  
X Ray ◽  
Cell Parameters ◽  
Mohs Hardness ◽  
Dark Green ◽  
The University

AbstractBassoite, ideally SrV3O7·4H2O, is a new mineral from the Molinello manganese mine, Val Graveglia. eastern Liguria, northern Apennines, Italy. It occurs as black euhedral to subhedral grains up to 400 urn across, closely associated with rhodonite, quartz and braunite. Bassoite is opaque with a sub-metallic lustre and a black streak. It is brittle and neither fracture nor cleavage was observed; the Vickers micro-hardness (VHN100) is 150 kg/mm (range 142—165; corresponding to a Mohs hardness of 4—41/2). The calculated density is 2.940 g/cm3 (on the basis of the empirical formula and X-ray single-crystal data). Bassoite is weakly bireflectant and very weakly pleochroic from grey to a dark green. Internal reflections are absent. The mineral is anisotropic, without characteristic rotation tints. Reflectance percentages (Rmin and Rmax) for the four standard COM wavelengths are 18.5%, 19.0% (471.1 nm); 17.2%, 17.8% (548.3 nm); 16.8%, 17.5% (586.6 nm) and 16.2%, 16.8% (652.3 nm), respectively.Bassoite is monoclinic, space group P21/m, with unit-cell parameters: a = 5.313(3) Å, b = 10.495(3) Å, c = 8.568(4) Å, β = 91.14(5)°, V= 477.7(4) Å3, a:b:c = 0.506:1:0.816, and Z = 2. The crystal structure was refined to R1 = 0.0209 for 1148 reflections with Fo > 4σ(Fo) and it consists of layers of VO5 pyramids (with vanadium in the tetravalent state) pointing up and down alternately with Sr between the layers (in nine-fold coordination). The nine most intense X-ray powder-diffraction lines [d in Å (I/I0) (hkt)] are: 8.5663 (100) (001); 6.6363 (14) (011); 3.4399 (14) (1̄21); 3.4049 (17) (121); 2.8339 (15) (1̄22); 2.7949 (11) (122); 2.6550 (15) (200); 2.6237 (11) (040) and 1.8666 (15) (240). Electron microprobe analyses produce a chemical formula (Sr0.97Ca0.02Na0.01)V3.00O74H20, on the basis of 2(Sr+Ca+Na) = 1, taking the results of the structure refinement into account. The presence of water molecules was confirmed by micro-Raman spectroscopy. The name honours Riccardo Basso (b. 1947), full professor of Mineralogy and Crystallography at the University of Genova. The new mineral and mineral name have been approved by the Commission on New Minerals, Nomenclature and Classification, IMA (2011-028).

scholarly journals Langhofite, Pb2(OH)[WO4(OH)], a new mineral from Långban, Sweden

2020 ◽  
Vol 84 (3) ◽  
pp. 381-389
Author(s):  
Dan Holtstam ◽  
Fernando Cámara ◽  
Andreas Karlsson
Keyword(s):  
New Mineral ◽  
Calculated Density ◽  
Triclinic Space Group ◽  
Oh Groups ◽  
International Mineralogical Association ◽  
Cell Parameters ◽  
Discovery Sample ◽  
Vibration Spectroscopy ◽  
Perfect Cleavage ◽  
Mohs Hardness

AbstractLanghofite, ideally Pb2(OH)[WO4(OH)], is a new mineral from the Långban mine, Värmland, Sweden. The mineral and its name were approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019-005). It occurs in a small vug in hematite–pyroxene skarn associated with calcite, baryte, fluorapatite, mimetite and minor sulfide minerals. Langhofite is triclinic, space group P$\bar{1}$, and unit-cell parameters a = 6.6154(1) Å, b = 7.0766(1) Å, c = 7.3296(1) Å, α = 118.175(2)°, β = 94.451(1)°, γ = 101.146(1)° and V = 291.06(1) Å3 for Z = 2. The seven strongest Bragg peaks from powder X-ray diffractometry are [dobs, Å (I)(hkl)]: 6.04(24)(010), 3.26(22)(11$\bar{2}$), 3.181(19)(200), 3.079(24)(1$\bar{1}$2), 3.016(100)(020), 2.054(20)(3$\bar{1}$1) and 2.050(18)(13$\bar{2}$). Langhofite occurs as euhedral crystals up to 4 mm, elongated along the a axis, with lengthwise striation. Mohs hardness is ca. 2½, based on VHN25 data obtained in the range 130–192. The mineral is brittle, with perfect {010} and {100} cleavages. The calculated density based on the ideal formula is 7.95(1) g⋅cm–3. Langhofite is colourless to white (non-pleochroic) and transparent, with a white streak and adamantine lustre. Reflectance curves show normal dispersion, with maximum values 15.7–13.4% within 400–700 nm. Electron microprobe analyses yield only the metals Pb and W above the detection level. The presence of OH-groups is demonstrated with vibration spectroscopy, from band maxima present at ~3470 and 3330 cm–1. A distinct Raman peak at ca. 862 cm–1 is related to symmetric W–oxygen stretching vibrations. The crystal structure is novel and was refined to R = 1.6%. It contains [W2O8(OH)2]6– edge-sharing dimers (with highly distorted WO6-octahedra) forming chains along [101] with [(OH)2Pb4]6+ dimers formed by (OH)Pb3 triangles. Chains configure (010) layers linked along [010] by long and weak Pb–O bonds, thus explaining the observed perfect cleavage on {010}. The mineral is named for curator Jörgen Langhof (b. 1965), who collected the discovery sample.

Embreyite: structure determination, chemical formula and comparative crystal chemistry

2018 ◽  
Vol 82 (2) ◽  
pp. 275-290 ◽  
Author(s):  
Vadim M. Kovrugin ◽  
Oleg I. Siidra ◽  
Igor V. Pekov ◽  
Nikita V. Chukanov ◽  
Dmitry A. Khanin ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Single Crystal ◽  
Microprobe Analysis ◽  
Direct Methods ◽  
Structural Similarity ◽  
Structural Type ◽  
Unit Cell ◽  
Single Crystal Xrd ◽  
Cell Parameters ◽  
Distorted Octahedra

ABSTRACTEmbreyite from the Berezovskoe, Urals, Russia, was studied by the means of powder X-ray diffraction (XRD), single-crystal XRD, infrared spectroscopy and microprobe analysis. The empirical formula of embreyite obtained on the basis of microprobe analysis is Pb1.29Cu0.07Cr0.52P0.43O4(without taking into account the presence of H2O). An examination of single-crystal XRD frames of the tested crystals cut from embreyite intergrowths revealed split reflection spots of weak intensities, even after a long exposure time. The crystal structure of embreyite (monoclinic,C2/m,a= 9.802(16),b= 5.603(9),c= 7.649(12) Å, β = 114.85(3)oandV= 381.2(11) Å3) has been solved by direct methods and refined toR1= 0.050 for 318 unique observed reflections. The powder XRD patterns of the holotype embreyite and the fresh material studied are close in bothdvalues and the intensities match the pattern calculated from the structural single-crystal XRD data. The unit-cell parameters were re-calculated for the holotype sample using a new cell setting and correspondinghklindices. The crystal structure of embreyite is based on layers formed by corner-sharing mixed chromate-phosphate tetrahedra and PbO6distorted octahedra. The interlayer space is filled by disordered Pb2+and Cu2+cations. Generally, the crystal structure of embreyite can be referred to the structural type of palmierite. {Pb[(Cr,P)O4]2]} layers in embreyite are similar in topology to those in yavapaiite-type compounds. The general formula of embreyite can be represented as (Pbx$M_y^{2 +} $□1–x–y)2{Pb[(Cr,P)O4]2}(H2O)n, whereM2+= Cu and Zn and 0.5 ≤x+y≤ 1, or, in the simplified form: (Pb,Cu,□)2{Pb[(Cr,P)O4]2}(H2O)n. The simplified formula of embreyite is similar in stoichiometry to vauquelinite and may explain the existence of the solid-solution series. The determination of the crystal structure of embreyite may also help to resolve the crystal chemical nature of cassedanneite. The XRD pattern of cassedanneite contains a distinct reflection withd= 13.9 Å, forbidden for the embreyite unit cell. This feature may indicate the doubling of thecunit-cell parameter of cassedanneite in comparison with embreyite. We assume that cassedanneite has structural similarity to embreyite with, presumably, a disordered distribution of Cr and V.

Geochemistry of spinel peridotite inclusions in basalts from Sardinia

1987 ◽  
Vol 51 (362) ◽  
pp. 561-568 ◽  
Author(s):  
C. Dupuy ◽  
J. Dostal ◽  
J. L. Bodinier
Keyword(s):  
Upper Mantle ◽  
Mineral Assemblage ◽  
Spinel Peridotite ◽  
Primary Mineral ◽  
Compositional Variations

AbstractThe spinel peridotite inclusions in basalts from Sardinia are upper-mantle residues affected by metasomatism which led to an enrichment particularly of U and light REE. The metasomatism took place prior to the recrystallization which produced the primary mineral assemblage of the inclusions. The compositional variations imply that the xenoliths are residual after at least two melting events.

Sign in / Sign up

Export Citation Format

Share Document