scholarly journals Thermal Stability of Calcium Oxalates from CO2 Sequestration for Storage Purposes: An In-Situ HT-XRPD and TGA Combined Study

Minerals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 53
Author(s):  
Nadia Curetti ◽  
Linda Pastero ◽  
Davide Bernasconi ◽  
Andrea Cotellucci ◽  
Ingrid Corazzari ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Low Temperature ◽  
Carbon Capture ◽  
Storage Temperature ◽  
Carbon Capture And Storage ◽  
Water Release ◽  
Structural Water ◽  
Component Mixture ◽  
Calcium Oxalates

Calcium oxalates are naturally occurring biominerals and can be found as a byproduct of some industrial processes. Recently, a new and green method for carbon capture and sequestration in stable calcium oxalate from oxalic acid produced by carbon dioxide reduction was proposed. The reaction resulted in high-quality weddellite crystals. Assessing the stability of these weddellite crystals is crucial to forecast their reuse as solid-state reservoir of pure CO2 and CaO in a circular economy perspective or, eventually, their disposal. The thermal decomposition of weddellite obtained from the new method of carbon capture and storage was studied by coupling in-situ high-temperature X-ray powder diffraction and thermogravimetric analysis, in order to evaluate the dehydration, decarbonation, and the possible production of unwanted volatile species during heating. At low temperature (119–255 °C), structural water release was superimposed to an early CO2 feeble evolution, resulting in a water-carbon dioxide mixture that should be separated for reuse. Furthermore, the storage temperature limit must be considered bearing in mind this CO2 release low-temperature event. In the range 390–550 °C, a two-component mixture of carbon monoxide and dioxide is evolved, requiring oxidation of the former or gas separation to reuse pure gases. Finally, the last decarbonation reaction produced pure CO2 starting from 550 °C.

scholarly journals Mineral carbonation process of carbon dioxide using animal bone

2021 ◽  
Vol 104 (2) ◽  
pp. 003685042110196
Author(s):  
Brendon Mpofu ◽  
Hembe E Mukaya ◽  
Diakanua B Nkazi
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Economic Feasibility ◽  
Mineral Carbonation ◽  
Agitation Rate ◽  
Carbonation Reaction ◽  
Carbonation Process ◽  
The Cost ◽  
Cow Bone

Carbon dioxide has been identified as one of the greenhouse gases responsible for global warming. Several carbon capture and storage technologies have been developed to mitigate the large quantities of carbon dioxide released into the atmosphere, but these are quite expensive and not easy to implement. Thus, this research analyses the technical and economic feasibility of using calcium leached from cow bone to capture and store carbon dioxide through the mineral carbonation process. The capturing process of carbon dioxide was successful using the proposed technique of leaching calcium from cow shinbone (the tibia) in the presence of HCl by reacting the calcium solution with gaseous carbon dioxide. AAS and XRF analysis were used to determine the concentration of calcium in leached solutions and the composition of calcium in cow bone respectively. The best leaching conditions were found to be 4 mole/L HCl and leaching time of 6 h. Under these conditions, a leaching efficiency of 91% and a calcium conversion of 83% in the carbonation reaction were obtained. Other factors such as carbonation time, agitation rate, and carbonation reaction temperature had little effect on the yield. A preliminary cost analysis showed that the cost to capture 1 ton of CO2 with the proposed technique is about US$ 268.32, which is in the acceptable range of the capturing process. However, the cost of material used and electricity should be reviewed to reduce the preliminary production cost.

Adsorption of Carbon Dioxide on Monoethanolamine (MEA)–Impregnated Kenaf Core Fiber by Pressure Swing Adsorption System (PSA)

2014 ◽  
Vol 68 (5) ◽  
Author(s):  
Nabilah Zaini ◽  
Khairul Sozana Nor Kamarudin
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Pressure Swing Adsorption ◽  
Co2 Adsorption ◽  
Carbon Capture And Storage ◽  
Freundlich Isotherm ◽  
Industrial Applications ◽  
Sem Analysis ◽  
Impregnation Method ◽  
Pressure Swing

Emission of carbon dioxide (CO2) becomes a major concern in combating issues of global warming. The strategy to reduce the concentration of CO2 could be achieved by executing carbon capture and storage (CCS) technology such as adsorption. This study presents the used of kenaf as a green source for CO2 adsorption material. The modification of MEA on kenaf is a novelty work to enhance the capacity of adsorbent since MEA has been proved to have potential in separating CO2 in industrial applications. In this work, 10 wt % of MEA has been impregnated on kenaf via wet impregnation method. The adsorption of CO2 study was conducted by passing CO2/N2 mixture in a ratio of 30:70 in a Pressure Swing Adsorption (PSA) system with a pressure up to 1.5 bar at ambient temperature. Result obtained via SEM analysis shows that the morphology of kenaf was affected after modification with MEA. However, the presence of MEA on kenaf has improved the CO2 adsorption capacity by 16 %. In addition, the adsorption equilibrium data for kenaf and MEA modified kenaf are well fitted in Freundlich isotherm model at low pressure and well fitted in Langmuir model at higher pressure. This study indicates that the introduction of MEA on kenaf could enhance the CO2 adsorption process.  

Numerical Simulation of Microscopic Formation of Carbon Dioxide Hydrate in Two-Phase Flow

2021 ◽  
Author(s):  
Alan Junji Yamaguchi ◽  
Kaito Kobayashi ◽  
Toru Sato ◽  
Takaomi Tobase
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Two Phase Flow ◽  
Pore Space ◽  
Carbon Capture And Storage ◽  
Hydrate Formation ◽  
Field Method ◽  
Phase Field Method ◽  
Phase Flow ◽  
Two Phase

Abstract The global warming is an important environmental concern and the carbon capture and storage (CCS) emerges as a very promising technology. Captured carbon dioxide (CO2) can be stored onshore or offshore in the aquifers. There is, however, a risk that stored CO2 will leak due to natural disasters. One possible solution to this is the natural formation of CO2 hydrates. Gas hydrate has an ice-like structure in which small gas molecules are trapped within cages of water molecules. Hydrate formation occurs under high pressure and low temperature conditions. Its stability under these conditions acts like a cap rock to prevent CO2 leaks. The main objective of this study is to understand how hydrate formation affects the permeability of leaked CO2 flows. The phase field method was used to simulate microscopic hydrate growth within the pore space of sand grains, while the lattice Boltzmann method was used to simulate two-phase flow. The results showed that the hydrate morphology within the pore space changes with the flow, and the permeability is significantly reduced as compared with the case without the flow.

Study on Dispersion of Carbon Dioxide over the Shrubbery Region

2021 ◽  
Vol 9 ◽  
Author(s):  
Wang Huiru ◽  
You Zhanping ◽  
Mo Fan ◽  
Liu Bin ◽  
Han Peng
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
Dispersion Pattern ◽  
Buried Pipeline ◽  
Dynamic Impact ◽  
Coverage Area ◽  
Computational Fluid Dynamics Cfd ◽  
And Storage ◽  
Terrain Features

In the carbon capture and storage (CCS) infrastructure, the risk of a high-pressure buried pipeline rupture possibly leads to catastrophic accidents due to the release of tremendous amounts of carbon dioxide (CO2). Therefore, a comprehensive understanding of the effects of CO2 dispersion pattern after release from CCS facilities is essential to allow the appropriate safety precautions to be taken. Due to variations in topography above the pipeline, the pattern of CO2 dispersion tends to be affected by the real terrain features, such as trees and hills. However, in most previous studies, the dynamic impact of trees on the wind field was often approximated to linear treatment or even ignored. In this article, a computational fluid dynamics (CFD) model was proposed to predict CO2 dispersion over shrubbery areas. The shrubs were regarded as a kind of porous media, and the model was validated against the results from experiment. It was found that shrubbery affected the flow field near the ground, enhancing the lateral dispersion of CO2. Compared with that of the shrub-free terrain, the coverage area of the three shrub terrains at 60 s increased by 8.1 times, 6.7 times, and 9.1 times, respectively. The influence of shrub height and porosity on CO2 dispersion is nonlinear. This research provides reliable data for the risk assessment of CCS.

Densities of the carbon dioxide+hydrogen, a system of relevance to carbon capture and storage

2013 ◽  
Vol 13 ◽  
pp. 78-86 ◽  
Author(s):  
Yolanda Sanchez-Vicente ◽  
Trevor C. Drage ◽  
Martyn Poliakoff ◽  
Jie Ke ◽  
Michael W. George
Keyword(s):  
Carbon Dioxide ◽  
Carbon Capture ◽  
Carbon Capture And Storage ◽  
And Storage

scholarly journals Field-Based Stable Isotope Analysis of Carbon Dioxide by Mid-Infrared Laser Spectroscopy for Carbon Capture and Storage Monitoring

2014 ◽  
Vol 86 (24) ◽  
pp. 12191-12198 ◽  
Author(s):  
Robert van Geldern ◽  
Martin E. Nowak ◽  
Martin Zimmer ◽  
Alexandra Szizybalski ◽  
Anssi Myrttinen ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Stable Isotope ◽  
Laser Spectroscopy ◽  
Stable Isotope Analysis ◽  
Carbon Capture ◽  
Isotope Analysis ◽  
Carbon Capture And Storage ◽  
Mid Infrared ◽  
Infrared Laser Spectroscopy ◽  
And Storage

scholarly journals Harnessing Escherichia coli for bio-based production of formate under pressurized H 2 and CO 2 gases.

2021 ◽  
Author(s):  
Magali Roger ◽  
Thomas C. P. Reed ◽  
Frank Sargent
Keyword(s):  
Escherichia Coli ◽  
Carbon Dioxide ◽  
Formic Acid ◽  
Carbon Capture ◽  
Continuous Production ◽  
Carbon Capture And Storage ◽  
Physiological Role ◽  
Anaerobic Growth ◽  
Formate Hydrogenlyase ◽  
And Storage

Escherichia coli is gram-negative bacterium that is a workhorse for biotechnology. The organism naturally performs a mixed-acid fermentation under anaerobic conditions where it synthesises formate hydrogenlyase (FHL-1). The physiological role of the enzyme is the disproportionation of formate in to H 2 and CO 2 . However, the enzyme has been observed to catalyse hydrogenation of CO 2 given the correct conditions, and so has possibilities in bio-based carbon capture and storage if it can be harnessed as a hydrogen-dependent CO 2 -reductase (HDCR). In this study, an E. coli host strain was engineered for the continuous production of formic acid from H 2 and CO 2 during bacterial growth in a pressurised batch bioreactor. Incorporation of tungsten, in place of molybdenum, in FHL-1 helped to impose a degree of catalytic bias on the enzyme. This work demonstrates that it is possible to couple cell growth to simultaneous, unidirectional formate production from carbon dioxide and develops a process for growth under pressurised gases. IMPORTANCE Greenhouse gas emissions, including waste carbon dioxide, are contributing to global climate change. A basket of solutions is needed to steadily reduce emissions, and one approach is bio-based carbon capture and storage. Here we present out latest work on harnessing a novel biological solution for carbon capture. The Escherichia coli formate hydrogenlyase (FHL-1) was engineered to be constitutively expressed. Anaerobic growth under pressurised H 2 and CO 2 gases was established and aqueous formic acid was produced as a result. Incorporation of tungsten in to the enzyme in place of molybdenum proved useful in poising FHL-1 as a hydrogen-dependent CO 2 reductase (HDCR).

scholarly journals Capture, Storage and Utilization of Carbon Dioxide by Microalgae and Production of Biomaterials

2021 ◽  
Vol 25 (1) ◽  
pp. 574-586
Author(s):  
Marta Bertolini ◽  
Fosca Conti
Keyword(s):  
Carbon Dioxide ◽  
Carbon Dioxide Emissions ◽  
Carbon Capture ◽  
Extracellular Polymeric Substances ◽  
Incubation Temperature ◽  
Carbon Capture And Storage ◽  
Value Added ◽  
Culture Conditions ◽  
Transportation Systems ◽  
Operative Strategies

Abstract Carbon dioxide emissions are strongly related to climate change and increase of global temperature. Whilst a complete change in producing materials and energy and in traffic and transportation systems is already in progress and circular economy concepts are on working, Carbon Capture and Storage (CCS) and Carbon Capture and Utilisation (CCU) represent technically practicable operative strategies. Both technologies have main challenges related to high costs, so that further advanced research is required to obtain feasible options. In this article, the focus is mainly on CCU using microalgae that are able to use CO2 as building block for value-added products such as biofuels, EPS (Extracellular Polymeric Substances), biomaterials and electricity. The results of three strains (UTEX 90, CC 2656, and CC 1010) of the microalgal organism Chlamydomonas reinhardtii are discussed. The results about ideal culture conditions suggest incubation temperature of 30 °C, pH between 6.5 and 7.0, concentrations of acetate between 1.6 and 2.3 g L–1 and of ammonium chloride between 0.1 and 0.5 g L–1, the addition of glucose This green microalga is a valid model system to optimize the production of biomass, carbohydrates and lipids.

scholarly journals Thermodynamic modeling of solid fuel gasification in mixtures of oxygen and carbon dioxide

2021 ◽  
Vol 2119 (1) ◽  
pp. 012101
Author(s):  
I G Donskoy
Keyword(s):  
Carbon Dioxide ◽  
Thermodynamic Modeling ◽  
Solid Fuel ◽  
Carbon Capture ◽  
Power Plants ◽  
Thermal Power ◽  
Carbon Capture And Storage ◽  
Low Oxygen ◽  
Fuel Conversion ◽  
Oxygen Concentrations

Abstract One of the main problems in the use of solid fuels is inevitable formation of significant amounts of carbon dioxide. The prospects for reducing CO2 emissions (carbon capture and storage, CCS) are opening up with the use of new coal technologies, such as thermal power plants with integrated gasification (IGCC) and transition to oxygen-enriched combustion (oxyfuel). In order to study the efficiency of solid fuel conversion processes using carbon dioxide, thermodynamic modeling was carried out. Results show that difference between efficiency of fuel conversion in O2/N2 and O2/CO2 mixtures increases with an increase in the volatile content and a decrease in the carbon content. The effect of using CO2 as a gasification agent depends on the oxygen concentration: at low oxygen concentrations, the process temperature turns out to be low due to dilution; at high oxygen concentrations, the CO2 concentration is not high enough for efficient carbon conversion.

Sign in / Sign up

Export Citation Format

Share Document