scholarly journals Testing Strategies of the In Vitro Micronucleus Assay for the Genotoxicity Assessment of Nanomaterials in BEAS-2B Cells

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1929
Author(s):  
Tereza Cervena ◽  
Andrea Rossnerova ◽  
Tana Zavodna ◽  
Jitka Sikorova ◽  
Kristyna Vrbova ◽  
...  
Keyword(s):  
Cytochalasin B ◽  
Culture Media ◽  
Methodological Approach ◽  
Micronucleus Assay ◽  
Toxicity Testing ◽  
In Vitro Toxicity ◽  
Testing Strategies ◽  
Transmission Electron ◽  
The Impact

The evaluation of the frequency of micronuclei (MN) is a broadly utilised approach in in vitro toxicity testing. Nevertheless, the specific properties of nanomaterials (NMs) give rise to concerns regarding the optimal methodological variants of the MN assay. In bronchial epithelial cells (BEAS-2B), we tested the genotoxicity of five types of NMs (TiO2: NM101, NM103; SiO2: NM200; Ag: NM300K, NM302) using four variants of MN protocols, differing in the time of exposure and the application of cytochalasin-B combined with the simultaneous and delayed co-treatment with NMs. Using transmission electron microscopy, we evaluated the impact of cytochalasin-B on the transport of NMs into the cells. To assess the behaviour of NMs in a culture media for individual testing conditions, we used dynamic light scattering measurement. The presence of NMs in the cells, their intracellular aggregation and dispersion properties were comparable when tests with or without cytochalasin-B were performed. The genotoxic potential of various TiO2 and Ag particles differed (NM101 < NM103 and NM302 < NM300K, respectively). The application of cytochalasin-B tended to increase the percentage of aberrant cells. In conclusion, the comparison of the testing strategies revealed that the level of DNA damage induced by NMs is affected by the selected methodological approach. This fact should be considered in the interpretation of the results of genotoxicity tests.

Preparation of nanoparticle dispersions for in-vitro toxicity testing

2009 ◽  
Vol 28 (6-7) ◽  
pp. 377-385 ◽  
Author(s):  
M. Vippola ◽  
GCM Falck ◽  
HK Lindberg ◽  
S. Suhonen ◽  
E. Vanhala ◽  
...  
Keyword(s):  
Culture Media ◽  
Biological Effects ◽  
Lung Surfactant ◽  
Calf Serum ◽  
Toxicity Testing ◽  
Toxicity Tests ◽  
In Vitro Toxicity ◽  
Bronchial Epithelial ◽  
Titanium Dioxides

Studies on potential toxicity of engineered nanoparticle (ENP) in biological systems require a proper and accurate particle characterization to ensure the reproducibility of the results and to understand biological effects of ENP. A full characterization of ENP should include various measurements such as particle size and size distribution, shape and morphology, crystallinity, composition, surface chemistry, and surface area of ENP. It is also important to characterize the state of ENP dispersions. In this study, four different ENPs, rutile and anatase titanium dioxides and short single- and multi-walled carbon nanotubes, were characterized in two dispersion media: bronchial epithelial growth medium, used for bronchial epithelial BEAS cells, and RPMI-1640 culture media with 10% of fetal calf serum (FCS) for human mesothelial (MeT-5A) cells. The purpose of this study was to determine the characteristics of ENPs and their dispersions as well as to compare dispersion additives suitable for toxicity tests and thus establish an appropriate way to prepare dispersions that performs well with the selected ENP. Dispersion additives studied in the media were bovine serum albumin (BSA) as a protein resource, dipalmitoyl phosphatidylcholine (DPPC) as a model lung surfactant, and combination of BSA and DPPC. Dispersions were characterized using optical microscopy and transmission electron microscopy. Our results showed that protein addition, BSA or FCS, in cell culture media generated small agglomerates of primary particles with narrow size variations and improved the stability of the dispersions and thus also the relevance of the in-vitro genotoxicity tests to be done.

scholarly journals Role of Surface Chemistry in the In Vitro Lung Response to Nanofibrillated Cellulose

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 389
Author(s):  
Kukka Aimonen ◽  
Satu Suhonen ◽  
Mira Hartikainen ◽  
Viviana R. Lopes ◽  
Hannu Norppa ◽  
...  
Keyword(s):  
Micronucleus Assay ◽  
Nanofibrillated Cellulose ◽  
In Vitro Toxicity ◽  
Surface Functional Group ◽  
Fiber Morphology ◽  
Surface Charges ◽  
Cell Viability Assay ◽  
Wide Range ◽  
Group Density

Wood-derived nanofibrillated cellulose (NFC) has emerged as a sustainable material with a wide range of applications and increasing presence in the market. Surface charges are introduced during the preparation of NFC to facilitate the defibrillation process, which may also alter the toxicological properties of NFC. In the present study, we examined the in vitro toxicity of NFCs with five surface chemistries: nonfunctionalized, carboxymethylated, phosphorylated, sulfoethylated, and hydroxypropyltrimethylammonium-substituted. The NFC samples were characterized for surface functional group density, surface charge, and fiber morphology. Fibril aggregates predominated in the nonfunctionalized NFC, while individual nanofibrils were observed in the functionalized NFCs. Differences in surface group density among the functionalized NFCs were reflected in the fiber thickness of these samples. In human bronchial epithelial (BEAS-2B) cells, all NFCs showed low cytotoxicity (CellTiter-GloVR luminescent cell viability assay) which never exceeded 10% at any exposure time. None of the NFCs induced genotoxic effects, as evaluated by the alkaline comet assay and the cytokinesis-block micronucleus assay. The nonfunctionalized and carboxymethylated NFCs were able to increase intracellular reactive oxygen species (ROS) formation (chloromethyl derivative of 2′,7′-dichlorodihydrofluorescein diacetate assay). However, ROS induction did not result in increased DNA or chromosome damage.

scholarly journals A survey of aerosol exposure systems relative to the analysis of cytotoxicity: A Cooperation Centre for Scientific Research Relative to Tobacco (CORESTA) perspective

2021 ◽  
Vol 5 ◽  
pp. 239784732110222
Author(s):  
David Thorne ◽  
Roman Wieczorek ◽  
Toshiro Fukushima ◽  
Han-Jae Shin ◽  
Robert Leverette ◽  
...  
Keyword(s):  
Scientific Research ◽  
Toxicity Testing ◽  
User Preferences ◽  
In Vitro Toxicity ◽  
Aerosol Generation ◽  
Aerosol Exposure ◽  
Comprehensive Survey ◽  
Survey Results ◽  
System Data

During a Cooperation Centre for Scientific Research Relative to Tobacco (CORESTA) meeting, the in vitro toxicity testing Sub-Group (IVT SG) met to discuss the evolving field of aerosol exposure research. Given the diversity of exposure parameters and biological endpoints being used, it was considered a high priority to investigate and contextualise the responses obtained. This is particularly driven by the inability to compare between studies on different exposure systems due to user preferences and protocol differences. Twelve global tobacco and contract research companies met to discuss this topic and formulate an aligned approach on how this diverging field of research could be appropriately compared. Something that is becoming increasingly important, especially in the light of more focused regulatory scrutiny. A detailed and comprehensive survey was conducted on over 40 parameters ranging from aerosol generation, dilution and data analysis across eight geographically independent laboratories. The survey results emphasise the diversity of in vitro exposure parameters and methodologies employed across the IVT SG and highlighted pockets of harmonisation. For example, many of the biological protocol parameters are consistent across the Sub-Group. However, variables such as cell type and exposure time remain largely inconsistent. The next steps for this work will be to map parameters and system data against biological findings and investigate whether the observed inconsistencies translate into increased biological variability. The results from the survey provide improved awareness of parameters and nuances, that may be of substantial benefit to scientists in intersecting fields and in the development of harmonised approaches.

Time-lapse Phase-contrast Microphotography of Cell Populations as a Basis for Improvement of In Vitro Toxicity Assessment

1992 ◽  
Vol 20 (2) ◽  
pp. 302-306
Author(s):  
Miroslav Červinka
Keyword(s):  
Cell Proliferation ◽  
Cell Morphology ◽  
Video Recording ◽  
Toxicity Testing ◽  
Time Lapse ◽  
Time Dependent ◽  
In Vitro Toxicity ◽  
Simple Modification ◽  
Pertinent Data

Recent trends in the field of in vitro toxicology have centred around the validation of in vitro methods. The ultimate goal is to obtain pertinent data with the minimum of effort. In our laboratory, we have used toxicological methods based on the evaluation of cell morphology and cell proliferation. A method suitable for this purpose is time-lapse microcinematographic (or video) recording of cellular changes, which we used for many years. For practical in vitro toxicity testing, however, this method is far too complicated. Therefore, we have tried to develop a simple modification for the evaluation of cell morphology and cell proliferation, which would still allow for a basic time-dependent analysis. Comparison of detailed microcinematographic analysis with analysis according to our new proliferation assay is demonstrated with cisplatin as the toxicant. We believe that a time-dependent approach could improve the in vitro assessment of toxicity.

Sign in / Sign up

Export Citation Format

Share Document