scholarly journals Model Predictive Control for the Process of MEA Absorption of CO2 Based on the Data Identification Model

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 183
Author(s):  
Qianrong Li ◽  
Wenzhao Zhang ◽  
Yuwei Qin ◽  
Aimin An
Keyword(s):  
Model Predictive Control ◽  
Predictive Control ◽  
Aspen Plus ◽  
Open Loop ◽  
Operating Conditions ◽  
Effective Control ◽  
Subspace Identification ◽  
Capture Process ◽  
The Stability ◽  
Intractable Problem

The absorption process of CO2 by ethanolamine solution is essentially a dynamic system, which is greatly affected by the power plant startup and flue gas load changes. Hence, studying the optimal control of the CO2 chemical capture process has always been an important part in academic fields. Model predictive control (MPC) is a very effective control strategy used for such process, but the most intractable problem is the lack of accurate and effective model. In this work, Aspen Plus and Aspen Plus Dynamics are used to establish the process of monoethanolamine (MEA) absorption of CO2 related models based on subspace identification. The nonlinear distribution of the system under steady-state operation is analyzed. Dynamic tests were carried out to understand the dynamic characteristics of the system under variable operating conditions. Systematic subspace identification on open-loop experimental data was performed. We designed a model predictive controller based on the identified model combined with the state-space equation using Matlab/Simulink to analyze the changes of the system under two different disturbances. The simulation results show that the control performance of the MPC algorithm is significantly better than that of the traditional proportion integral differential (PID) system, with excellent setpoint tracking ability and robustness, which improve the stability and flexibility of the system.

Path Following Control of a Mobile Robot Using Contractive Model Predictive Control

2013 ◽  
Vol 397-400 ◽  
pp. 1366-1372
Author(s):  
Kiattisin Kanjanawanishkul
Keyword(s):  
Model Predictive Control ◽  
Mobile Robot ◽  
Predictive Control ◽  
Path Following ◽  
Open Loop ◽  
System Stability ◽  
Bounded Control ◽  
Loop Control ◽  
Guarantee System ◽  
The Stability

In this paper, we propose a novel controller based on contractive model predictive control for the path following problem of a mobile robot. Besides dealing with path following, we also fulfill the following objectives: bounded control signals and optimal forward velocity. These three objectives are all achieved through integrating into our model predictive control framework as constraints. However, the major concern in the use of model predictive control is whether such an open-loop control scheme can guarantee system stability. In this case, we apply the idea of a contractive constraint to guarantee the stability of our MPC framework. To illustrate its effectiveness, several simulation scenarios have been conducted.

Application of Neural Network for Nonlinear Predictive Control

2012 ◽  
Vol 562-564 ◽  
pp. 1964-1967 ◽  
Author(s):  
Zhi Cheng Xu ◽  
Bin Zhu ◽  
Qing Bin Jiang
Keyword(s):  
Neural Network ◽  
Model Predictive Control ◽  
Linear Model ◽  
Predictive Control ◽  
Control Method ◽  
Nonlinear Modeling ◽  
Nonlinear Process ◽  
Effective Control ◽  
Nonlinear Predictive Control ◽  
The Stability

A novel model predictive control method was proposed for a class of dynamic processes with modest nonlinearities in this paper. In this method, a diagonal recurrent neural network (DRNN) is used to compensate nonlinear modeling error that is caused because linear model is regarded as prediction model of nonlinear process. It is aimed at offsetting the effect of model mismatch on the control performance, strengthening the robustness of predictive control and the stability of control system. Under a certain assumption condition, linear model predictive control method is extended to nonlinear process, which doesn’t need solve nonlinear optimization problem. Consequently, the computational efforts are reduced drastically. The simulation example shows that the proposed method is an effective control strategy with excellent tracing characteristics and strong robustness.

scholarly journals A New Model Predictive Control Method for Eliminating Hydraulic Oscillation and Dynamic Hydraulic Imbalance in a Complex Chilled Water System

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3608
Author(s):  
Yang Yuan ◽  
Neng Zhu ◽  
Haizhu Zhou ◽  
Hai Wang
Keyword(s):  
Model Predictive Control ◽  
Predictive Control ◽  
Control Method ◽  
Water System ◽  
Energy Performance ◽  
Effective Control ◽  
New Model ◽  
Chilled Water ◽  
Chilled Water System ◽  
Hydraulic Oscillation

To enhance the energy performance of a central air-conditioning system, an effective control method for the chilled water system is always essential. However, it is a real challenge to distribute exact cooling energy to multiple terminal units in different floors via a complex chilled water network. To mitigate hydraulic imbalance in a complex chilled water system, many throttle valves and variable-speed pumps are installed, which are usually regulated by PID-based controllers. Due to the severe hydraulic coupling among the valves and pumps, the hydraulic oscillation phenomena often occur while using those feedback-based controllers. Based on a data-calibrated water distribution model which can accurately predict the hydraulic behaviors of a chilled water system, a new Model Predictive Control (MPC) method is proposed in this study. The proposed method is validated by a real-life chilled water system in a 22-floor hotel. By the proposed method, the valves and pumps can be regulated safely without any hydraulic oscillations. Simultaneously, the hydraulic imbalance among different floors is also eliminated, which can save 23.3% electricity consumption of the pumps.

scholarly journals Data–Driven Indirect Adaptive Model Predictive Control

2012 ◽  
Author(s):  
Norhaliza Wahab ◽  
Mohamed Reza Katebi ◽  
Mohd Fua’ad Rahmat ◽  
Salinda Bunyamin
Keyword(s):  
Model Predictive Control ◽  
Activated Sludge ◽  
State Space ◽  
Predictive Control ◽  
Sliding Window ◽  
Subspace Identification ◽  
Activated Sludge Process ◽  
Adaptive Model ◽  
Time Step ◽  
Adaptive Model Predictive Control

Kertas kerja ini membincangkan tentang reka bentuk Pengawal Ramalan Model Suai menggunakan kaedah Pengenalpastian Model Keadaan Ruang Sub–ruang bagi proses enapcemar teraktif. Penggunaan teknik Pengenalpastian Model Keadaan Ruang Sub–ruang di dalam kaedah kawalan tingkat gelangsar suai dibincangkan di mana pengenalpastian sub–ruang dalam talian menggunakan algoritma N4SID di perkenalkan bersama dengan rekabentuk Pengawal ramalan model. Pembangunan N4SID dalam talian di dalam kertas kerja ini menggunakan pengemaskini QR di mana gabungan di antara teknik kemaskini dan kemasbawah membolehkan pengadaptasi tingkap gelangsar. Di sini, untuk setiap langkah masa, bagi setiap data baru akan dimasukkan ke faktor R manakala data yang lama dibuang. Begitu juga, strategi bagi uraian nilai tunggal diperkenalkan ke dalam Pengawal Ramalan Model Suai tak langsung untuk masukan tambahan kawalan bagi sistem terkekang tak lelurus. Beberapa kajian simulasi bagi parameter kawalan berlainan di dalam pengawal/pengenalpastian algoritma dilaksanakan. Bagi reka bentuk Pengawal Ramalan Model Suai tak langsung, pengiraan masa yang terlibat dengan menggunakan pendekatan uraian nilai tunggal kurang berbanding dengan kaedah perancangan kuadratik dan keputusan yang memberangsangkan ini adalah sumbangan utama di dalam kertas kerja ini. Kata kunci: Pengawal suai; proses enapcemar teraktif; pengawal ramalan model; pengenalpastian sub–ruang This paper explores the design of Adaptive Model Predictive Control (AMPC) using Subspace State–space Model Identification (SMI) techniques for an activated sludge process. The implementation of SMI techniques in the adaptive sliding window control methods are discussed where the online subspace identification using Numerical State–space Subspace System Identification (N4SID) algorithm is proposed along with Model Predictive Control (MPC) design method. The online N4SID algorithm developed in this study makes use of the QR–updating where the combination of update and down date techniques enables sliding window adaptation. Here, at each time step, for the new experimental data added into R factor, the oldest data are removed. Also, the Singular Value Decomposition (SVD–based) strategy is proposed into Indirect AMPC (IAMPC) for the control increment input constrained nonlinear system. Several simulation studies for different control parameters in control/identification algorithm are performed. For the IAMPC control design, the computational times involved using an SVD approach shows less burdensome compared to Quadratic Programming (QP) method and such an interesting result is considered as one of the main contribution in this paper. Key words: Adaptive control; activated sludge process; model predictive control; subspace identification

scholarly journals Towards Real-Time Reinforcement Learning Control of a Wave Energy Converter

2020 ◽  
Vol 8 (11) ◽  
pp. 845
Author(s):  
Enrico Anderlini ◽  
Salman Husain ◽  
Gordon G. Parker ◽  
Mohammad Abusara ◽  
Giles Thomas
Keyword(s):  
Reinforcement Learning ◽  
Model Predictive Control ◽  
System Dynamics ◽  
Real Time ◽  
Predictive Control ◽  
Wave Energy ◽  
Economies Of Scale ◽  
Computational Cost ◽  
Effective Control ◽  
Deployment Time

The levellised cost of energy of wave energy converters (WECs) is not competitive with fossil fuel-powered stations yet. To improve the feasibility of wave energy, it is necessary to develop effective control strategies that maximise energy absorption in mild sea states, whilst limiting motions in high waves. Due to their model-based nature, state-of-the-art control schemes struggle to deal with model uncertainties, adapt to changes in the system dynamics with time, and provide real-time centralised control for large arrays of WECs. Here, an alternative solution is introduced to address these challenges, applying deep reinforcement learning (DRL) to the control of WECs for the first time. A DRL agent is initialised from data collected in multiple sea states under linear model predictive control in a linear simulation environment. The agent outperforms model predictive control for high wave heights and periods, but suffers close to the resonant period of the WEC. The computational cost at deployment time of DRL is also much lower by diverting the computational effort from deployment time to training. This provides confidence in the application of DRL to large arrays of WECs, enabling economies of scale. Additionally, model-free reinforcement learning can autonomously adapt to changes in the system dynamics, enabling fault-tolerant control.

Model Predictive Control and Controller Parameter Optimisation of Combustion Instabilities

2019 ◽  
Vol 36 (2) ◽  
pp. 185-194 ◽  
Author(s):  
I. Yazar ◽  
F. Caliskan ◽  
R. Vepa
Keyword(s):  
Model Predictive Control ◽  
Predictive Control ◽  
Closed Loop ◽  
Combustion Process ◽  
Open Loop ◽  
Loop Model ◽  
Parameter Optimisation ◽  
Direct Adaptive Control ◽  
The Cost ◽  
Adaptive Control Algorithm

Abstract In this paper the application of model predictive control (MPC) to a two-mode model of the dynamics of the combustion process is considered. It is shown that the MPC by itself does not stabilize the combustor and the control gains obtained by applying the MPC algorithms need to be optimized further to ensure that the phase difference between the two modes is also stable. The results of applying the algorithm are compared with the open loop model amplitude responses and to the closed loop responses obtained by the application of a direct adaptive control algorithm. It is shown that the MPC coupled with the cost parameter optimisation proposed in the paper, always guarantees the closed loop stability, a feature that may not always be possible with an adaptive implementations.

Sign in / Sign up

Export Citation Format

Share Document