scholarly journals Long Time Series Land Cover Classification in China from 1982 to 2015 Based on Bi-LSTM Deep Learning

2019 ◽  
Vol 11 (14) ◽  
pp. 1639 ◽  
Author(s):  
Haoyu Wang ◽  
Xiang Zhao ◽  
Xin Zhang ◽  
Donghai Wu ◽  
Xiaozheng Du
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Land Cover ◽  
Land Cover Classification ◽  
Series Data ◽  
Long Time Series ◽  
Quantitative Remote Sensing ◽  
Long Time ◽  
Year 2000

Land cover classification data have a very important practical application value, and long time series land cover classification datasets are of great significance studying environmental changes, urban changes, land resource surveys, hydrology and ecology. At present, the starting point of continuous land cover classification products for many years is mostly after the year 2000, and there is a lack of long-term continuously annual land cover classification products before 2000. In this study, a long time series classification data extraction model is established using a bidirectional long-term and short-term memory network (Bi-LSTM). In the model, quantitative remote sensing products combined with DEM, nighttime lighting data, and latitude and longitude elevation data were used. We applied this model in China and obtained China’s 1982–2017 0.05° land cover classification product. The accuracy assessment results of the test data show that the overall accuracy is 84.2% and that the accuracies of wetland, water, glacier, tundra, city and bare soil reach 92.1%, 92.0%, 94.3%, 94.6% and 92.4%, respectively. For the first time, this study used a variety of long time series data, especially quantitative remote sensing products, for the classification of features. At the same time, it also acquired long time series land cover classification products, including those from the year 2000. This study provides new ideas for the establishment of higher-resolution long time series land cover classification products.

Welfare Use in Japan: Trends and Determinants

2007 ◽  
pp. 88
Author(s):  
Wataru Suzuki ◽  
Yanfei Zhou
Keyword(s):  
Time Series ◽  
Longitudinal Data ◽  
Time Series Data ◽  
Positive Impact ◽  
Series Data ◽  
Negative Effects ◽  
Long Time ◽  
Welfare Use ◽  
The Impact

This article represents the first step in filling a large gap in knowledge concerning why Public Assistance (PA) use recently rose so fast in Japan. Specifically, we try to address this problem not only by performing a Blanchard and Quah decomposition on long-term monthly time series data (1960:04-2006:10), but also by estimating prefecturelevel longitudinal data. Two interesting findings emerge from the time series analysis. The first is that permanent shock imposes a continuously positive impact on the PA rate and is the main driving factor behind the recent increase in welfare use. The second finding is that the impact of temporary shock will last for a long time. The rate of the use of welfare is quite rigid because even if the PA rate rises due to temporary shocks, it takes about 8 or 9 years for it to regain its normal level. On the other hand, estimations of prefecture-level longitudinal data indicate that the Financial Capability Index (FCI) of the local government2 and minimum wage both impose negative effects on the PA rate. We also find that the rapid aging of Japan's population presents a permanent shock in practice, which makes it the most prominent contribution to surging welfare use.

scholarly journals Time-Series Model-Adjusted Percentile Features: Improved Percentile Features for Land-Cover Classification Based on Landsat Data

2020 ◽  
Vol 12 (18) ◽  
pp. 3091
Author(s):  
Shuai Xie ◽  
Liangyun Liu ◽  
Jiangning Yang
Keyword(s):  
Time Series ◽  
Land Cover ◽  
Time Series Data ◽  
Land Cover Classification ◽  
Time Series Model ◽  
Training Data ◽  
Series Data ◽  
Landsat Data ◽  
Data Sampling ◽  
Continuous Change

Percentile features derived from Landsat time-series data are widely adopted in land-cover classification. However, the temporal distribution of Landsat valid observations is highly uneven across different pixels due to the gaps resulting from clouds, cloud shadows, snow, and the scan line corrector (SLC)-off problem. In addition, when applying percentile features, land-cover change in time-series data is usually not considered. In this paper, an improved percentile called the time-series model (TSM)-adjusted percentile is proposed for land-cover classification based on Landsat data. The Landsat data were first modeled using three different time-series models, and the land-cover changes were continuously monitored using the continuous change detection (CCD) algorithm. The TSM-adjusted percentiles for stable pixels were then derived from the synthetic time-series data without gaps. Finally, the TSM-adjusted percentiles were used for generating supervised random forest classifications. The proposed methods were implemented on Landsat time-series data of three study areas. The classification results were compared with those obtained using the original percentiles derived from the original time-series data with gaps. The results show that the land-cover classifications obtained using the proposed TSM-adjusted percentiles have significantly higher overall accuracies than those obtained using the original percentiles. The proposed method was more effective for forest types with obvious phenological characteristics and with fewer valid observations. In addition, it was also robust to the training data sampling strategy. Overall, the methods proposed in this work can provide accurate characterization of land cover and improve the overall classification accuracy based on such metrics. The findings are promising for percentile-based land cover classification using Landsat time series data, especially in the areas with frequent cloud coverage.

scholarly journals Automatic Land-Cover Mapping using Landsat Time-Series Data based on Google Earth Engine

2019 ◽  
Vol 11 (24) ◽  
pp. 3023 ◽  
Author(s):  
Shuai Xie ◽  
Liangyun Liu ◽  
Xiao Zhang ◽  
Jiangning Yang ◽  
Xidong Chen ◽  
...  
Keyword(s):  
Time Series ◽  
Land Cover ◽  
Vegetation Index ◽  
Time Series Data ◽  
Land Cover Classification ◽  
Google Earth ◽  
Thematic Mapper ◽  
Series Data ◽  
Land Cover Mapping ◽  
Google Earth Engine

The Google Earth Engine (GEE) has emerged as an essential cloud-based platform for land-cover classification as it provides massive amounts of multi-source satellite data and high-performance computation service. This paper proposed an automatic land-cover classification method using time-series Landsat data on the GEE cloud-based platform. The Moderate Resolution Imaging Spectroradiometer (MODIS) land-cover products (MCD12Q1.006) with the International Geosphere–Biosphere Program (IGBP) classification scheme were used to provide accurate training samples using the rules of pixel filtering and spectral filtering, which resulted in an overall accuracy (OA) of 99.2%. Two types of spectral–temporal features (percentile composited features and median composited monthly features) generated from all available Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper Plus (ETM+) data from the year 2010 ± 1 were used as input features to a Random Forest (RF) classifier for land-cover classification. The results showed that the monthly features outperformed the percentile features, giving an average OA of 80% against 77%. In addition, the monthly features composited using the median outperformed those composited using the maximum Normalized Difference Vegetation Index (NDVI) with an average OA of 80% against 78%. Therefore, the proposed method is able to generate accurate land-cover mapping automatically based on the GEE cloud-based platform, which is promising for regional and global land-cover mapping.

scholarly journals A Long Time-Series Radiometric Normalization Method for Landsat Images

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4505 ◽  
Author(s):  
Wei Wu ◽  
Xia Sun ◽  
Xianwei Wang ◽  
Jing Fan ◽  
Jiancheng Luo ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Traditional Method ◽  
Acquisition Time ◽  
Reference Image ◽  
Optimization Strategy ◽  
Remote Sensing Images ◽  
Gray Scale ◽  
Long Time Series ◽  
Long Time

Radiometric normalization attempts to normalize the radiomimetic distortion caused by non-land surface-related factors, for example, different atmospheric conditions at image acquisition time and sensor factors, and to improve the radiometric consistency between remote sensing images. Using a remote sensing image and a reference image as a pair is a traditional method of performing radiometric normalization. However, when applied to the radiometric normalization of long time-series of images, this method has two deficiencies: first, different pseudo-invariant features (PIFs)—radiometric characteristics of which do not change with time—are extracted in different pairs of images; and second, when processing an image based on a reference, we can minimize the residual between them, but the residual between temporally adjacent images may induce steep increases and decreases, which may conceal the information contained in the time-series indicators, such as vegetative index. To overcome these two problems, we propose an optimization strategy for radiometric normalization of long time-series of remote sensing images. First, the time-series gray-scale values for a pixel in the near-infrared band are sorted in ascending order and segmented into different parts. Second, the outliers and inliers of the time-series observation are determined using a modified Inflexion Based Cloud Detection (IBCD) method. Third, the variation amplitudes of the PIFs are smaller than for vegetation but larger than for water, and accordingly the PIFs are identified. Last, a novel optimization strategy aimed at minimizing the correction residual between the image to be processed and the images processed previously is adopted to determine the radiometric normalization sequence. Time-series images from the Thematic Mapper onboard Landsat 5 for Hangzhou City are selected for the experiments, and the results suggest that our method can effectively eliminate the radiometric distortion and preserve the variation of vegetation in the time-series of images. Smoother time-series profiles of gray-scale values and uniform root mean square error distributions can be obtained compared with those of the traditional method, which indicates that our method can obtain better radiometric consistency and normalization performance.

scholarly journals Uncertainty Analysis of Object-Based Land-Cover Classification Using Sentinel-2 Time-Series Data

2020 ◽  
Vol 12 (22) ◽  
pp. 3798
Author(s):  
Lei Ma ◽  
Michael Schmitt ◽  
Xiaoxiang Zhu
Keyword(s):  
Time Series ◽  
Land Cover ◽  
Time Series Data ◽  
Land Cover Classification ◽  
Series Data ◽  
Spectral Bands ◽  
Object Based ◽  
Spatio Temporal ◽  
Optical Satellite Images ◽  
The Impact

Recently, time-series from optical satellite data have been frequently used in object-based land-cover classification. This poses a significant challenge to object-based image analysis (OBIA) owing to the presence of complex spatio-temporal information in the time-series data. This study evaluates object-based land-cover classification in the northern suburbs of Munich using time-series from optical Sentinel data. Using a random forest classifier as the backbone, experiments were designed to analyze the impact of the segmentation scale, features (including spectral and temporal features), categories, frequency, and acquisition timing of optical satellite images. Based on our analyses, the following findings are reported: (1) Optical Sentinel images acquired over four seasons can make a significant contribution to the classification of agricultural areas, even though this contribution varies between spectral bands for the same period. (2) The use of time-series data alleviates the issue of identifying the “optimal” segmentation scale. The finding of this study can provide a more comprehensive understanding of the effects of classification uncertainty on object-based dense multi-temporal image classification.

scholarly journals Photosynthesis, carbon acquisition and primary productivity of phytoplankton: a review dedicated to Colin Reynolds

Hydrobiologia ◽  
2020 ◽  
Vol 848 (1) ◽  
pp. 77-94 ◽  
Author(s):  
Martin T. Dokulil ◽  
Kuimei Qian
Keyword(s):  
Climate Change ◽  
Remote Sensing ◽  
Time Series ◽  
Primary Productivity ◽  
Light Harvesting ◽  
Algal Growth ◽  
Long Time Series ◽  
Methods And Techniques ◽  
Long Time ◽  
The Subject

AbstractThe review intends to give an overview on developments, success, results of photosynthetic research and on primary productivity of algae both freshwater and marine with emphasis on more recent discoveries. Methods and techniques are briefly outlined focusing on latest improvements. Light harvesting and carbon acquisition are evaluated as a basis of regional and global primary productivity and algal growth. Thereafter, long-time series, remote sensing and river production are exemplified and linked to the potential effects of climate change. Lastly, the synthesis seeks to put the life achievements of Colin S. Reynolds into context of the subject review.

Spaceborne remote sensing of the world’s protected areas

2014 ◽  
Vol 39 (3) ◽  
pp. 388-404 ◽  
Author(s):  
Thomas W. Gillespie ◽  
Katherine S. Willis ◽  
Stacey Ostermann-Kelm
Keyword(s):  
Remote Sensing ◽  
Time Series ◽  
Land Cover ◽  
Protected Areas ◽  
Natural Resource ◽  
Series Data ◽  
Pixel Resolution ◽  
The World ◽  
Status And Trends ◽  
The Status

There has been a rapid evolution of satellites, sensors, and techniques to measure, monitor, and manage terrestrial protected areas. There are over 100,000 protected areas around the world and most lack important information on the status and trends of natural resource issues. We review advances and limitations in spaceborne remote sensing that can be applied to all terrestrial protected areas around the world. There have been significant advances in baseline vegetation mapping and land cover classifications by combining field data, data from multiple sensors, and classification techniques. However, global classifications on the extent of non-forest vegetation types (e.g. grasslands and shrublands) are still needed at 30 m pixel resolution. High spatial (< 1 m) and spectral (220 bands) resolution sensors have provided important data on environmental issues (e.g. invasive species, degradation) that are region or site specific. Advances in monitoring protected areas have primarily focused on forest ecosystems and land cover dynamics in and around protected areas using time series data. Landsat imagery can be used to monitor vegetation extent and dynamics at 30 m pixel resolution across the globe, while the MODIS sensors are more appropriate for monthly updates on trends of ecosystem health in protected areas. There has also been an increase in time series remote sensing datasets on anthropogenic impacts, such as light pollution, fire, and land surface temperature, that can be used for all protected areas. Future geographic research should focus on developing global protocols and incorporating near real time and annual metrics that can easily be used by natural resource managers to assess the status and trends of all protected areas.

Sign in / Sign up

Export Citation Format

Share Document