Acceleration Compensation for Estimation of Along-Track Velocity of Ground Moving Target from Single-Channel SAR SLC Data

Across-track acceleration is a major source of estimation error of along-track velocity in synthetic-aperture radar (SAR) ground moving-target indication (GMTI). This paper presents the theory and a method of compensating across-track acceleration to improve the accuracy of along-track velocity estimated from single-channel SAR single-look complex data. A unique feature of the proposed method is the utilisation of phase derivatives in the Doppler frequency domain, which is effective for azimuth-compressed signals. The performance of the method was evaluated through experimental data acquired by TerraSAR-X and speed-controlled and measured vehicles. The application results demonstrate a notable improvement in along-track velocity estimates. The amount of along-track velocity correction is particularly significant when a target has irregular motion with a low signal-to-clutter ratio. A discontinuous velocity jump rather than a constant acceleration was also observed and verified through comparison between actual data and simulations. By applying this method, the capability of single-channel SAR GMTI could be substantially improved in terms of accuracy of velocity, and moving direction. However, the method is effective only if the correlation between the actual Doppler phase derivatives and a model derived from the residual Doppler rate is sufficiently high. The proposed method will be applied to X-band SAR systems of KOMPSAT-5 and -6.

Download Full-text

Doppler Frequency Estimation of Point Targets in the Single-Channel SAR Image by Linear Least Squares

Remote Sensing ◽

10.3390/rs10071160 ◽

2018 ◽

Vol 10 (7) ◽

pp. 1160 ◽

Cited By ~ 3

Author(s):

Joong-Sun Won

Keyword(s):

Least Squares ◽

Moving Objects ◽

Single Channel ◽

Frequency Estimation ◽

Doppler Frequency ◽

Critical Threshold ◽

Linear Least Squares ◽

X Band ◽

Coastal Sea ◽

Esprit Algorithm

This paper presents a method and results for the estimation of residual Doppler frequency, and consequently the range velocity component of point targets in single-channel synthetic aperture radar (SAR) focused single-look complex (SLC) data. It is still a challenging task to precisely retrieve the radial velocity of small and slow-moving objects, which requires an approach providing precise estimates from only a limited number of samples within a few range bins. The proposed method utilizes linear least squares, along with the estimation of signal parameters via rotational invariance techniques (ESPRIT) algorithm, to provide optimum estimates from sets of azimuth subsamples that have different azimuth temporal distances. The ratio of estimated Doppler frequency to root-mean square error (RMSE) is suggested for determining a critical threshold, optimally selecting a number of azimuth subsample sets to be involved in the estimation. The proposed method was applied to TerraSAR-X and KOMPSAT-5 X-band SAR SLC data for on-land and coastal sea estimation, with speed-controlled, truck-mounted corner reflectors and ships, respectively. The results demonstrate its performance of the method, with percent errors of less than 5%, in retrieved range velocity for both on-land and in the sea. It is also robust, even for weak targets with low peak-to-sidelobe ratios (PSLRs) and signal-to-clutter ratios (RCSs). Since the characteristics of targets and clutter on land and in the sea are different, it is recommended that the method is applied separately with different thresholds. The limitations of the approach are also discussed.

Download Full-text

Moving Target Indication for Dual-Channel Circular SAR/GMTI Systems

Sensors ◽

10.3390/s20010158 ◽

2019 ◽

Vol 20 (1) ◽

pp. 158

Author(s):

Laihe Wang ◽

Yueli Li ◽

Wu Wang ◽

Daoxiang An

Keyword(s):

Phase Shift ◽

Doppler Frequency ◽

Channel Equalization ◽

Phase Image ◽

Moving Target ◽

Blind Channel Equalization ◽

Dual Channel ◽

Yaw Angle ◽

Along Track ◽

Phase Term

In a dual-channel circular synthetic aperture radar (CSAR) and ground moving target indication (GMTI) system, the antenna baseline is not parallel with the flight path due to a yaw angle. The angle causes a varying group-phase shift between the dual-channel signals and therefore degrades the correlation between the image pair. Therefore, the group-phase shift needs to be removed before channel equalization. To resolve the problem, the interferometric phase term was deduced and analyzed based on the geometry of a dual-channel CSAR system. Then, the varying phase term with respect to the Doppler frequency and the varying group-phase shift over the range were compensated for in the channel registration. Furthermore, blind channel equalization, including two-dimensional calibration and amplitude equalization, was applied to eliminate the amplitude and residual phase differences between the channels. Finally, the amplitude image obtained using a displaced phase center antenna (DPCA) was multiplied by the phase image obtained with along-track interferometry (ATI) to detect moving targets. The experimental results verified the effectiveness of the method for both uniform and non-uniform clutter suppression.

Download Full-text