scholarly journals Linear-Based Incremental Co-Registration of MLS and Photogrammetric Point Clouds

2021 ◽  
Vol 13 (11) ◽  
pp. 2195
Author(s):  
Shiming Li ◽  
Xuming Ge ◽  
Shengfu Li ◽  
Bo Xu ◽  
Zhendong Wang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Registration Method ◽  
Cloud Data ◽  
Linear Feature ◽  
Data Registration ◽  
Source Point ◽  
Urban Remote Sensing ◽  
Single Data

Today, mobile laser scanning and oblique photogrammetry are two standard urban remote sensing acquisition methods, and the cross-source point-cloud data obtained using these methods have significant differences and complementarity. Accurate co-registration can make up for the limitations of a single data source, but many existing registration methods face critical challenges. Therefore, in this paper, we propose a systematic incremental registration method that can successfully register MLS and photogrammetric point clouds in the presence of a large number of missing data, large variations in point density, and scale differences. The robustness of this method is due to its elimination of noise in the extracted linear features and its 2D incremental registration strategy. There are three main contributions of our work: (1) the development of an end-to-end automatic cross-source point-cloud registration method; (2) a way to effectively extract the linear feature and restore the scale; and (3) an incremental registration strategy that simplifies the complex registration process. The experimental results show that this method can successfully achieve cross-source data registration, while other methods have difficulty obtaining satisfactory registration results efficiently. Moreover, this method can be extended to more point-cloud sources.

scholarly journals Automatic Recognition of Pole-Like Objects from Mobile Laser Scanning Point Clouds

2018 ◽  
Vol 10 (12) ◽  
pp. 1891 ◽  
Author(s):  
Zhenwei Shi ◽  
Zhizhong Kang ◽  
Yi Lin ◽  
Yu Liu ◽  
Wei Chen
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Shape Matching ◽  
Feature Detection ◽  
Three Dimensional ◽  
Point Clouds ◽  
Information Support ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Linear Feature

Mobile Laser Scanning (MLS) point cloud data contains rich three-dimensional (3D) information on road ancillary facilities such as street lamps, traffic signs and utility poles. Automatically recognizing such information from point cloud would provide benefits for road safety inspection, ancillary facilities management and so on, and can also provide basic information support for the construction of an information city. This paper presents a method for extracting and classifying pole-like objects (PLOs) from unstructured MLS point cloud data. Firstly, point cloud is preprocessed to remove outliers, downsample and filter ground points. Then, the PLOs are extracted from the point cloud by spatial independence analysis and cylindrical or linear feature detection. Finally, the PLOs are automatically classified by 3D shape matching. The method was tested based on two point clouds with different road environments. The completeness, correctness and overall accuracy were 92.7%, 97.4% and 92.3% respectively in Data I. For Data II, that provided by International Society for Photogrammetry and Remote Sensing Working Group (ISPRS WG) III/5 was also used to test the performance of the method, and the completeness, correctness and overall accuracy were 90.5%, 97.1% and 91.3%, respectively. Experimental results illustrate that the proposed method can effectively extract and classify PLOs accurately and effectively, which also shows great potential for further applications of MLS point cloud data.

scholarly journals VISUALIZATION OF THE CONSTRUCTION OF ANCIENT ROMAN BUILDINGS IN OSTIA USING POINT CLOUD DATA

2017 ◽  
Vol XLII-2/W3 ◽  
pp. 345-352
Author(s):  
Y. Hori ◽  
T. Ogawa
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Feature Matching ◽  
Three Dimensional ◽  
Point Clouds ◽  
Final Report ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Coverage Accuracy ◽  
New Research

The implementation of laser scanning in the field of archaeology provides us with an entirely new dimension in research and surveying. It allows us to digitally recreate individual objects, or entire cities, using millions of three-dimensional points grouped together in what is referred to as "point clouds". In addition, the visualization of the point cloud data, which can be used in the final report by archaeologists and architects, should usually be produced as a JPG or TIFF file. Not only the visualization of point cloud data, but also re-examination of older data and new survey of the construction of Roman building applying remote-sensing technology for precise and detailed measurements afford new information that may lead to revising drawings of ancient buildings which had been adduced as evidence without any consideration of a degree of accuracy, and finally can provide new research of ancient buildings. We used laser scanners at fields because of its speed, comprehensive coverage, accuracy and flexibility of data manipulation. Therefore, we “skipped” many of post-processing and focused on the images created from the meta-data simply aligned using a tool which extended automatic feature-matching algorithm and a popular renderer that can provide graphic results.

An Initial Registration Method of Point Clouds Based on Random Sampling

2014 ◽  
Vol 513-517 ◽  
pp. 3680-3683 ◽  
Author(s):  
Xiao Xu Leng ◽  
Jun Xiao ◽  
Deng Yu Li
Keyword(s):  
Random Sampling ◽  
Point Cloud ◽  
Critical Role ◽  
Point Clouds ◽  
Least Square ◽  
Target Point ◽  
Registration Method ◽  
Source Point ◽  
Base Points ◽  
The Matrix

As the first step in 3D point cloud process, registration plays an critical role in determining the quality of subsequent results. In this paper, an initial registration algorithm of point clouds based on random sampling is proposed. In the proposed algorithm, the base points set is first extracted randomly in the target point cloud, next an optimal corresponding points set is got from the source point cloud, then a transform matrix is estimated based on the two sets with least square methods, finally the matrix is applied on the source point cloud. Experimental results show that this algorithm has ideal precision as well as good robustness.

The Advantages of Using Laser Scanners in Surveying in Protected Sites

2015 ◽  
pp. 382-402
Author(s):  
Gülhan Benli
Keyword(s):  
Protected Areas ◽  
Point Cloud ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Laser Scanners ◽  
Point Data

Since the 2000s, terrestrial laser scanning, as one of the methods used to document historical edifices in protected areas, has taken on greater importance because it mitigates the difficulties associated with working on large areas and saves time while also making it possible to better understand all the particularities of the area. Through this technology, comprehensive point data (point clouds) about the surface of an object can be generated in a highly accurate three-dimensional manner. Furthermore, with the proper software this three-dimensional point cloud data can be transformed into three-dimensional rendering/mapping/modeling and quantitative orthophotographs. In this chapter, the study will present the results of terrestrial laser scanning and surveying which was used to obtain three-dimensional point clouds through three-dimensional survey measurements and scans of silhouettes of streets in Fatih in Historic Peninsula in Istanbul, which were then transposed into survey images and drawings. The study will also cite examples of the facade mapping using terrestrial laser scanning data in Istanbul Historic Peninsula Project.

scholarly journals Efficient Calculation Method for Tree Stem Traits from Large-Scale Point Clouds of Forest Stands

2021 ◽  
Vol 13 (13) ◽  
pp. 2476
Author(s):  
Hiroshi Masuda ◽  
Yuichiro Hiraoka ◽  
Kazuto Saito ◽  
Shinsuke Eto ◽  
Michinari Matsushita ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Large Scale ◽  
Random Access ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Forest Stands ◽  
Cross Sectional ◽  
Cloud Data ◽  
Wireframe Model

With the use of terrestrial laser scanning (TLS) in forest stands, surveys are now equipped to obtain dense point cloud data. However, the data range, i.e., the number of points, often reaches the billions or even higher, exceeding random access memory (RAM) limits on common computers. Moreover, the processing time often also extends beyond acceptable processing lengths. Thus, in this paper, we present a new method of efficiently extracting stem traits from huge point cloud data obtained by TLS, without subdividing or downsampling the point clouds. In this method, each point cloud is converted into a wireframe model by connecting neighboring points on the same continuous surface, and three-dimensional points on stems are resampled as cross-sectional points of the wireframe model in an out-of-core manner. Since the data size of the section points is much smaller than the original point clouds, stem traits can be calculated from the section points on a common computer. With the study method, 1381 tree stems were calculated from 3.6 billion points in ~20 min on a common computer. To evaluate the accuracy of this method, eight targeted trees were cut down and sliced at 1-m intervals; actual stem traits were then compared to those calculated from point clouds. The experimental results showed that the efficiency and accuracy of the proposed method are sufficient for practical use in various fields, including forest management and forest research.

scholarly journals AUTOMATED BIM ENTITY RECONSTRUCTION FROM UNSTRUCTURED 3D POINTCLOUDS

2021 ◽  
Vol 30 ◽  
pp. 126-130
Author(s):  
Jan Voříšek ◽  
Bořek Patzák ◽  
Edita Dvořáková ◽  
Daniel Rypl
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Human Interaction ◽  
Data Sets ◽  
Building Projects ◽  
Cloud Data ◽  
Data Points ◽  
Floor Plans ◽  
Large Building

Laser scanning is used widely in architecture and construction to document existing buildings by providing accurate data for creating a 3D model. The output is a set of data points in space, so-called point cloud. While point clouds can be directly rendered and inspected, they do not hold any semantics. Typically, engineers manually obtain floor plans, structural models, or the whole BIM model, which is a very time-consuming task for large building projects. In this contribution, we present the design and concept of a PointCloud2BIM library [1]. It provides a set of algorithms for automated or user assisted detection of fundamental entities from scanned point cloud data sets, such as floors, rooms, walls, and openings, and identification of the mutual relationships between them. The entity detection is based on a reasonable degree of human interaction (i.e., expected wall thickness). The results reside in a platform-agnostic JSON database allowing future integration into any existing BIM software.

scholarly journals SCAN PROFILES BASED METHOD FOR SEGMENTATION AND EXTRACTION OF PLANAR OBJECTS IN MOBILE LASER SCANNING POINT CLOUDS

2016 ◽  
Vol XLI-B3 ◽  
pp. 351-358 ◽  
Author(s):  
Hoang Long Nguyen ◽  
David Belton ◽  
Petra Helmholz
Keyword(s):  
Spatial Data ◽  
Point Cloud ◽  
Laser Scanning ◽  
Laser Scanner ◽  
Point Clouds ◽  
Point Cloud Data ◽  
Segmentation Method ◽  
Cloud Data ◽  
Processing Steps ◽  
Carrier Vehicle

The demand for accurate spatial data has been increasing rapidly in recent years. Mobile laser scanning (MLS) systems have become a mainstream technology for measuring 3D spatial data. In a MLS point cloud, the point clouds densities of captured point clouds of interest features can vary: they can be sparse and heterogeneous or they can be dense. This is caused by several factors such as the speed of the carrier vehicle and the specifications of the laser scanner(s). The MLS point cloud data needs to be processed to get meaningful information e.g. segmentation can be used to find meaningful features (planes, corners etc.) that can be used as the inputs for many processing steps (e.g. registration, modelling) that are more difficult when just using the point cloud. Planar features are dominating in manmade environments and they are widely used in point clouds registration and calibration processes. There are several approaches for segmentation and extraction of planar objects available, however the proposed methods do not focus on properly segment MLS point clouds automatically considering the different point densities. This research presents the extension of the segmentation method based on planarity of the features. This proposed method was verified using both simulated and real MLS point cloud datasets. The results show that planar objects in MLS point clouds can be properly segmented and extracted by the proposed segmentation method.

scholarly journals LIDAR Point Cloud Registration for Sensing and Reconstruction of Unstructured Terrain

2018 ◽  
Vol 8 (11) ◽  
pp. 2318 ◽  
Author(s):  
Qingyuan Zhu ◽  
Jinjin Wu ◽  
Huosheng Hu ◽  
Chunsheng Xiao ◽  
Wei Chen
Keyword(s):  
Autonomous Vehicles ◽  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Normal Vector ◽  
Registration Method ◽  
High Noise ◽  
Key Points ◽  
Scanning Lidar ◽  
Multisensor Data

When 3D laser scanning (LIDAR) is used for navigation of autonomous vehicles operated on unstructured terrain, it is necessary to register the acquired point cloud and accurately perform point cloud reconstruction of the terrain in time. This paper proposes a novel registration method to deal with uneven-density and high-noise of unstructured terrain point clouds. It has two steps of operation, namely initial registration and accurate registration. Multisensor data is firstly used for initial registration. An improved Iterative Closest Point (ICP) algorithm is then deployed for accurate registration. This algorithm extracts key points and builds feature descriptors based on the neighborhood normal vector, point cloud density and curvature. An adaptive threshold is introduced to accelerate iterative convergence. Experimental results are given to show that our two-step registration method can effectively solve the uneven-density and high-noise problem in registration of unstructured terrain point clouds, thereby improving the accuracy of terrain point cloud reconstruction.

scholarly journals An Efficient Framework for Mobile Lidar Trajectory Reconstruction and Mo-norvana Segmentation

2019 ◽  
Vol 11 (7) ◽  
pp. 836 ◽  
Author(s):  
Erzhuo Che ◽  
Michael Olsen
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Grid Point ◽  
Large Data ◽  
Point Clouds ◽  
Normal Variation ◽  
Variation Analysis ◽  
Cloud Data ◽  
Trajectory Reconstruction ◽  
Scan Pattern

Mobile laser scanning (MLS, or mobile lidar) is a 3-D data acquisition technique that has been widely used in a variety of applications in recent years due to its high accuracy and efficiency. However, given the large data volume and complexity of the point clouds, processing MLS data can be still challenging with respect to effectiveness, efficiency, and versatility. This paper proposes an efficient MLS data processing framework for general purposes consisting of three main steps: trajectory reconstruction, scan pattern grid generation, and Mo-norvana (Mobile Normal Variation Analysis) segmentation. We present a novel approach to reconstructing the scanner trajectory, which can then be used to structure the point cloud data into a scan pattern grid. By exploiting the scan pattern grid, point cloud segmentation can be performed using Mo-norvana, which is developed based on our previous work for processing Terrestrial Laser Scanning (TLS) data, normal variation analysis (Norvana). In this work, with an unorganized MLS point cloud as input, the proposed framework can complete various tasks that may be desired in many applications including trajectory reconstruction, data structuring, data visualization, edge detection, feature extraction, normal estimation, and segmentation. The performance of the proposed procedures are experimentally evaluated both qualitatively and quantitatively using multiple MLS datasets via the results of trajectory reconstruction, visualization, and segmentation. The efficiency of the proposed method is demonstrated to be able to handle a large dataset stably with a fast computation speed (about 1 million pts/sec. with 8 threads) by taking advantage of parallel programming.

Sign in / Sign up

Export Citation Format

Share Document