scholarly journals Multi-Target Angle Tracking Algorithm for Bistatic Multiple-Input Multiple-Output (MIMO) Radar Based on the Elements of the Covariance Matrix

Sensors ◽  
2018 ◽  
Vol 18 (3) ◽  
pp. 805
Author(s):  
Zhengyan Zhang ◽  
Jianyun Zhang ◽  
Qingsong Zhou ◽  
Xiaobo Li
2021 ◽  
Vol 13 (14) ◽  
pp. 2708
Author(s):  
Yongjun Liu ◽  
Guisheng Liao ◽  
Haichuan Li ◽  
Shengqi Zhu ◽  
Yachao Li ◽  
...  

The target detection of the passive multiple-input multiple-output (MIMO) radar that is comprised of multiple illuminators of opportunity and multiple receivers is investigated in this paper. In the passive MIMO radar, the transmitted signals of illuminators of opportunity are totally unknown, and the received signals are contaminated by the colored Gaussian noise with an unknown covariance matrix. The generalized likelihood ratio test (GLRT) is explored for the passive MIMO radar when the channel coefficients are also unknown, and the closed-form GLRT is derived. Compared with the GLRT with unknown transmitted signals and channel coefficients but a known covariance matrix, the proposed method is applicable for a more practical case whenthe covariance matrix of colored noise is unknown, although it has higher computational complexity. Moreover, the proposed GLRT can achieve similar performance as the GLRT with the known covariance matrix when the number of training samples is large enough. Finally, the effectiveness of the proposed GLRT is verified by several numerical examples.


2021 ◽  
Vol 13 (12) ◽  
pp. 2346
Author(s):  
Zhuang Xie ◽  
Jiahua Zhu ◽  
Chongyi Fan ◽  
Xiaotao Huang ◽  
Jian Wang

When the deceptive targets are in the ambiguious range bin but are received at the same range gate with the desired target by the array, the traditional multiple-input multiple-output (MIMO) radar is not able to discriminate between them. Based on the unique range-dependent beampattern of the frequency diverse array (FDA)-MIMO radar, we propose a novel robust mainlobe deceptive target suppression method based on covariance matrix reconstruction to form nulls at the frequency points of the transmit–receive domain where deceptive targets are located. First, the proposed method collects the deceptive targets and noise information in the transmit–receive frequency domain to reconstruct the jammer-noise covariance matrix (JNCM). Then, the covariance matrix of the desired target is constructed in the desired target region, which is assumed to already be known. The transmit–receive steering vector (SV) of the desired target is estimated to be the dominant eigenvector of the desired target covariance matrix. Finally, the weighting vector of the receive beamformer is calculated by combining the reconstructed JNCM and the estimated desired target SV. By implementing the weighting vector at the receiving end, the deceptive targets can be effectively suppressed. The simulation results demonstrate that the proposed method is robust to SV mismatches and provides a signal-to-jamming-plus-noise ratio (SJNR) output that is close to the optimal.


2012 ◽  
Vol 229-231 ◽  
pp. 1599-1604
Author(s):  
Jin Li Chen ◽  
Jia Qiang Li ◽  
Yan Ping Zhu

The distributed multiple-input multiple-output (MIMO) radar can achieve the high- resolution capabilities of target localization by coherent processing, far exceeding the bandwidth-dependent resolution of traditional radar. The conventional beam former synchronizing the phase across the widely separated transmitting and receiving antennas creates high level sidelobes that causes ambiguity in target localization. The Capon beam former with lower level sidelobes for target localization suffers from the irreversible of the covariance matrix when the numbers of transmitting and receiving antennas increase. Thus, the Capon algorithm with diagonal loading is applied to distributed MIMO radar for target localization with lower level sidelobes. Simulation results are presented to verify the effectiveness of the proposed method.


2021 ◽  
Vol 13 (15) ◽  
pp. 2964
Author(s):  
Fangqing Wen ◽  
Junpeng Shi ◽  
Xinhai Wang ◽  
Lin Wang

Ideal transmitting and receiving (Tx/Rx) array response is always desirable in multiple-input multiple-output (MIMO) radar. In practice, nevertheless, Tx/Rx arrays may be susceptible to unknown gain-phase errors (GPE) and yield seriously decreased positioning accuracy. This paper focuses on the direction-of-departure (DOD) and direction-of-arrival (DOA) problem in bistatic MIMO radar with unknown gain-phase errors (GPE). A novel parallel factor (PARAFAC) estimator is proposed. The factor matrices containing DOD and DOA are firstly obtained via PARAFAC decomposition. One DOD-DOA pair estimation is then accomplished from the spectrum searching. Thereafter, the remainder DOD and DOA are achieved by the least squares technique with the previous estimated angle pair. The proposed estimator is analyzed in detail. It only requires one instrumental Tx/Rx sensor, and it outperforms the state-of-the-art algorithms. Numerical simulations verify the theoretical advantages.


Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2453 ◽  
Author(s):  
Guangyong Zheng ◽  
Siqi Na ◽  
Tianyao Huang ◽  
Lulu Wang

Distributed multiple input multiple output (MIMO) radar has attracted much attention for its improved detection and estimation performance as well as enhanced electronic counter-counter measures (ECCM) ability. To protect the target from being detected and tracked by such radar, we consider a barrage jamming strategy towards a distributed MIMO. We first derive the Cramer–Rao bound (CRB) of target parameters estimation using a distributed MIMO under barrage jamming environments. We then set maximizing the CRB as the criterion for jamming resource allocation, aiming at degrading the accuracy of target parameters estimation. Due to the non-convexity of the CRB maximizing problem, particle swarm optimization is used to solve the problem. Simulation results demonstrate the advantages of the proposed strategy over traditional jamming methods.


2013 ◽  
Vol 443 ◽  
pp. 649-652
Author(s):  
Yan Ling Luo

MIMO radar (Multiple input multiple output radar) is a hot topic which gets lots of attention from researchers all around the world recently. It can achieve better detection performance than conventional phased radar. In this paper, the MIMO radar signal model is studied, and then the concept of MIMO radar is applied into SAR. The technique is employed to detect the oil spill in sea. At last, some conclusion is drawn. And some item for future research in presented also.


2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Bin Sun ◽  
Haowen Chen ◽  
Xizhang Wei ◽  
Xiang Li

The target localization in distributed multiple-input multiple-output (MIMO) radar is a problem of great interest. This problem becomes more complicated for the case of multitarget where the measurement should be associated with the correct target. Sparse representation has been demonstrated to be a powerful framework for direct position determination (DPD) algorithms which avoid the association process. In this paper, we explore a novel sparsity-based DPD method to locate multiple targets using distributed MIMO radar. Since the sparse representation coefficients exhibit block sparsity, we use a block sparse Bayesian learning (BSBL) method to estimate the locations of multitarget, which has many advantages over existing block sparse model based algorithms. Experimental results illustrate that DPD using BSBL can achieve better localization accuracy and higher robustness against block coherence and compressed sensing (CS) than popular algorithms in most cases especially for dense targets case.


Sign in / Sign up

Export Citation Format

Share Document