scholarly journals Design and Calibration of a Low-Cost SDI-12 Soil Moisture Sensor

Sensors ◽  
2019 ◽  
Vol 19 (3) ◽  
pp. 491 ◽  
Author(s):  
Juan González-Teruel ◽  
Roque Torres-Sánchez ◽  
Pedro Blaya-Ros ◽  
Ana Toledo-Moreo ◽  
Manuel Jiménez-Buendía ◽  
...  

Water is the main limiting factor in agricultural production as well as a scarce resource that needs to be optimized. The measurement of soil water with sensors is an efficient way for optimal irrigation management. However, commercial sensors are still too expensive for most farmers. This paper presents the design, development and calibration of a new capacitive low-cost soil moisture sensor that incorporates SDI-12 communication, allowing one to select the calibration equation for different soils. The sensor was calibrated in three different soils and its variability and accuracy were evaluated. Lower but cost-compensated accuracy was observed in comparing it with commercial sensors. Field tests have demonstrated the temperature influence on the sensor and its capability to efficiently detect irrigation and rainfall events.

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5387
Author(s):  
Abdelaziz M. Okasha ◽  
Hasnaa G. Ibrahim ◽  
Adel H. Elmetwalli ◽  
Khaled Mohamed Khedher ◽  
Zaher Mundher Yaseen ◽  
...  

Precise and quick estimates of soil moisture content for the purpose of irrigation scheduling are fundamentally important. They can be accomplished through the continuous monitoring of moisture content in the root zone area, which can be accomplished through automatic soil moisture sensors. Commercial soil moisture sensors are still expensive to be used by famers, particularly in developing countries, such as Egypt. This research aimed to design and calibrate a locally manufactured low-cost soil moisture sensor attached to a smart monitoring unit operated by Solar Photo Voltaic Cells (SPVC). The designed sensor was evaluated on clay textured soils in both lab and controlled greenhouse environments. The calibration results demonstrated a strong correlation between sensor readings and soil volumetric water content (θV). Higher soil moisture content was associated with decreased sensor output voltage with an average determination coefficient (R2) of 0.967 and a root-mean-square error (RMSE) of 0.014. A sensor-to-sensor variability test was performed yielding a 0.045 coefficient of variation. The results obtained from the real conditions demonstrated that the monitoring system for real-time sensing of soil moisture and environmental conditions inside the greenhouse could be a robust, accurate, and cost-effective tool for irrigation management.


Agriculture ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 141 ◽  
Author(s):  
Ekanayaka Achchillage Ayesha Dilrukshi Nagahage ◽  
Isura Sumeda Priyadarshana Nagahage ◽  
Takeshi Fujino

Readily available moisture in the root zone is very important for optimum plant growth. The available techniques to determine soil moisture content have practical limitations owing to their high cost, dependence on labor, and time consumption. We have developed a prototype for automated soil moisture monitoring using a low-cost capacitive soil moisture sensor (SKU:SEN0193) for data acquisition, connected to the internet. A soil-specific calibration was performed to integrate the sensor with the automated soil moisture monitoring system. The accuracy of the soil moisture measurements was compared with those of a gravimetric method and a well-established soil moisture sensor (SM-200, Delta-T Devices Ltd, Cambridge, UK). The root-mean-square error (RMSE) of the soil water contents obtained with the SKU:SEN0193 sensor function, the SM-200 manufacturer’s function, and the SM-200 soil-specific calibration function were 0.09, 0.07, and 0.06 cm3 cm−3, for samples in the dry to saturated range, and 0.05, 0.08, and 0.03 cm3 cm−3, for samples in the field capacity range. The repeatability of the measurements recorded with the developed calibration function support the potential use of the SKU:SEN0193 sensor to minimize the risk of soil moisture stress or excess water application.


2019 ◽  
Author(s):  
Anuradha Hadgil ◽  
Apoorva Joshi ◽  
Layak Ali ◽  
S. P. Sajjan

2020 ◽  
Vol 9 (1) ◽  
pp. 117-139 ◽  
Author(s):  
Angelika Xaver ◽  
Luca Zappa ◽  
Gerhard Rab ◽  
Isabella Pfeil ◽  
Mariette Vreugdenhil ◽  
...  

Abstract. Citizen science, scientific work and data collection conducted by or with non-experts, is rapidly growing. Although the potential of citizen science activities to generate enormous amounts of data otherwise not feasible is widely recognized, the obtained data are often treated with caution and scepticism. Their quality and reliability is not fully trusted since they are obtained by non-experts using low-cost instruments or scientifically non-verified methods. In this study, we evaluate the performance of Parrot's Flower Power soil moisture sensor used within the European citizen science project the GROW Observatory (GROW; https://growobservatory.org, last access: 30 March 2020). The aim of GROW is to enable scientists to validate satellite-based soil moisture products at an unprecedented high spatial resolution through crowdsourced data. To this end, it has mobilized thousands of citizens across Europe in science and climate actions, including hundreds who have been empowered to monitor soil moisture and other environmental variables within 24 high-density clusters around Europe covering different climate and soil conditions. Clearly, to serve as reference dataset, the quality of ground observations is crucial, especially if obtained from low-cost sensors. To investigate the accuracy of such measurements, the Flower Power sensors were evaluated in the lab and field. For the field trials, they were installed alongside professional soil moisture probes in the Hydrological Open Air Laboratory (HOAL) in Petzenkirchen, Austria. We assessed the skill of the low-cost sensors against the professional probes using various methods. Apart from common statistical metrics like correlation, bias, and root-mean-square difference, we investigated and compared the temporal stability, soil moisture memory, and the flagging statistics based on the International Soil Moisture Network (ISMN) quality indicators. We found a low intersensor variation in the lab and a high temporal agreement with the professional sensors in the field. The results of soil moisture memory and the ISMN quality flags analysis are in a comparable range for the low-cost and professional probes; only the temporal stability analysis shows a contrasting outcome. We demonstrate that low-cost sensors can be used to generate a dataset valuable for environmental monitoring and satellite validation and thus provide the basis for citizen-based soil moisture science.


Sign in / Sign up

Export Citation Format

Share Document