scholarly journals An Empirical Study on Transmission Beamforming for Ultrasonic Guided-Wave Based Structural Health Monitoring

Sensors ◽  
2020 ◽  
Vol 20 (5) ◽  
pp. 1445 ◽  
Author(s):  
Sergio Cantero-Chinchilla ◽  
Gerardo Aranguren ◽  
Muhammad Khalid Malik ◽  
Josu Etxaniz ◽  
Federico Martín de la Escalera
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Guided Waves ◽  
Signal To Noise Ratio ◽  
Guided Wave ◽  
High Signal ◽  
Efficient Operation ◽  
Structural Health ◽  
Thin Walled Structures ◽  
Ultrasonic Guided Wave

The development of reliable structural health monitoring techniques is enabling a healthy transition from preventive to condition-based maintenance, hence leading to safer and more efficient operation of different industries. Ultrasonic guided-wave based beamforming is one of the most promising techniques, which supports the monitoring of large thin-walled structures. However, beamforming has been typically applied to the post-processing stage (also known as virtual or receiver beamforming) because transmission or physical beamforming requires complex hardware configurations. This paper introduces an electronic structural health monitoring system that carries out transmission beamforming experiments by simultaneously emitting and receiving ultrasonic guided-waves using several transducers. An empirical characterization of the transmission beamforming technique for monitoring an aluminum plate is provided in this work. The high signal-to-noise ratio and accurate angular precision of the physical signal obtained in the experiments suggest that transmission beamforming can increase the reliability and robustnessof this monitoring technique for large structures and in real-world noisy environments.

Ultrasonic Guided Wave Imaging Techniques in Structural Health Monitoring

2008 ◽  
Author(s):  
Fei Yan ◽  
Joseph L. Rose ◽  
Roger L. Royer
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Guided Waves ◽  
Imaging Techniques ◽  
Guided Wave ◽  
Structural Health ◽  
Promising Tool ◽  
Ultrasonic Guided Wave ◽  
Sensor Position ◽  
Wave Imaging

Ultrasonic guided waves, due to theirs capability of interrogating a large structure from a single sensor position, has been proven as a promising tool for structural health monitoring (SHM). In this paper, we present two imaging approaches of utilizing guided wave leave-in-place sensors for early detection of defects in plate-like structures as well as for monitoring the defect growth. The first approach is based on a guided wave tomographic technique, in which the region surrounded by a sparse sensor array is monitored. The second one is a phased array approach, in which sensors are attached to a structure in a compact format to form an array. The region subjected to inspection and monitoring is the region outside the array. Both techniques have shown excellent capability of determining damage size, location, and severity.

scholarly journals Machine learning at the interface of structural health monitoring and non-destructive evaluation

2020 ◽  
Vol 378 (2182) ◽  
pp. 20190581
Author(s):  
P. Gardner ◽  
R. Fuentes ◽  
N. Dervilis ◽  
C. Mineo ◽  
S.G. Pierce ◽  
...  
Keyword(s):  
Machine Learning ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Ultrasonic Inspection ◽  
Guided Wave ◽  
Structural Health ◽  
Non Destructive Evaluation ◽  
Ultrasonic Guided Wave ◽  
Detection And Identification ◽  
Non Destructive

While both non-destructive evaluation (NDE) and structural health monitoring (SHM) share the objective of damage detection and identification in structures, they are distinct in many respects. This paper will discuss the differences and commonalities and consider ultrasonic/guided-wave inspection as a technology at the interface of the two methodologies. It will discuss how data-based/machine learning analysis provides a powerful approach to ultrasonic NDE/SHM in terms of the available algorithms, and more generally, how different techniques can accommodate the very substantial quantities of data that are provided by modern monitoring campaigns. Several machine learning methods will be illustrated using case studies of composite structure monitoring and will consider the challenges of high-dimensional feature data available from sensing technologies like autonomous robotic ultrasonic inspection. This article is part of the theme issue ‘Advanced electromagnetic non-destructive evaluation and smart monitoring’.

scholarly journals Analysis of Guided Wave Propagation in a Multi-Layered Structure in View of Structural Health Monitoring

2019 ◽  
Vol 9 (21) ◽  
pp. 4600 ◽  
Author(s):  
Yevgeniya Lugovtsova ◽  
Jannis Bulling ◽  
Christian Boller ◽  
Jens Prager
Keyword(s):  
Wave Propagation ◽  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Guided Waves ◽  
Oil And Gas ◽  
Numerical Approach ◽  
Guided Wave ◽  
Mode Shapes ◽  
Engineering Structures ◽  
Structural Health

Guided waves (GW) are of great interest for non-destructive testing (NDT) and structural health monitoring (SHM) of engineering structures such as for oil and gas pipelines, rails, aircraft components, adhesive bonds and possibly much more. Development of a technique based on GWs requires careful understanding obtained through modelling and analysis of wave propagation and mode-damage interaction due to the dispersion and multimodal character of GWs. The Scaled Boundary Finite Element Method (SBFEM) is a suitable numerical approach for this purpose allowing calculation of dispersion curves, mode shapes and GW propagation analysis. In this article, the SBFEM is used to analyse wave propagation in a plate consisting of an isotropic aluminium layer bonded as a hybrid to an anisotropic carbon fibre reinforced plastics layer. This hybrid composite corresponds to one of those considered in a Type III composite pressure vessel used for storing gases, e.g., hydrogen in automotive and aerospace applications. The results show that most of the wave energy can be concentrated in a certain layer depending on the mode used, and by that damage present in this layer can be detected. The results obtained help to understand the wave propagation in multi-layered structures and are important for further development of NDT and SHM for engineering structures consisting of multiple layers.

Feature-guided wave-based health monitoring of bent plates using fiber Bragg gratings

2016 ◽  
Vol 28 (9) ◽  
pp. 1211-1220 ◽  
Author(s):  
Pabitro Ray ◽  
Prabhu Rajagopal ◽  
Balaji Srinivasan ◽  
Krishnan Balasubramaniam
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Guided Waves ◽  
Fiber Bragg Gratings ◽  
Bragg Gratings ◽  
Guided Wave ◽  
Destructive Testing ◽  
Plate Structures ◽  
Structural Health ◽  
Bent Plates

Harnessing of ultrasonic guided waves confined in local features such as bends and welds, known as feature-guided waves, has emerged as a promising technique for non-destructive testing and structural health monitoring of industrial and aerospace structures. This article introduces a fiber Bragg grating based technique which uses feature-guided waves to detect anomalies or defects in plate structures with transverse bends. We are able to obtain good consistency between simulation and experimental results, both in the case of defect-free bent plates and those with transverse defects. Such results establish fiber Bragg gratings as a viable alternative to conventional techniques for structural health monitoring of bent plates.

scholarly journals Piezoelectric Wafer Active Sensors for Structural Health Monitoring of Composite Structures Using Tuned Guided Waves

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Victor Giurgiutiu
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Composite Structures ◽  
Guided Waves ◽  
Guided Wave ◽  
Impedance Method ◽  
Active Sensors ◽  
Structural Health ◽  
Piezoelectric Wafer Active Sensors ◽  
Piezoelectric Wafer

Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive transducers that enable a large class of structural health monitoring (SHM) applications such as: (a) embedded guided wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) high-frequency modal sensing, i.e., the electro-mechanical (E/M) impedance method; and (c) passive detection (acoustic emission and impact detection). The focus of this paper is on the challenges posed by using PWAS transducers in the composite structures as different from the metallic structures on which this methodology was initially developed. After a brief introduction, the paper reviews the PWAS-based SHM principles. It follows with a discussion of guided wave propagation in composites and PWAS tuning effects. Then, it discusses damage modes in composites. Finally, the paper presents some experimental results with damage detection in composite specimens. Hole damage and impact damage were detected using pitch-catch method with tuned guided waves being sent between a transmitter PWAS and a received PWAS. Root mean square deviation (RMSD) damage index (DI) were shown to correlate well with hole size and impact intensity. The paper ends with summary and conclusion; suggestions for further work are also presented.

scholarly journals Modeling Magnetostrictive Transducers for Structural Health Monitoring: Ultrasonic Guided Wave Generation and Reception

Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 7971
Author(s):  
Gaofeng Sha ◽  
Cliff J. Lissenden
Keyword(s):  
Structural Health Monitoring ◽  
Health Monitoring ◽  
Guided Waves ◽  
Lamb Waves ◽  
Wave Mode ◽  
Wave Generation ◽  
Guided Wave ◽  
Diverse Range ◽  
Structural Health ◽  
Phase Velocity Dispersion

Ultrasonic guided waves provide unique capabilities for the structural health monitoring of plate-like structures. They can detect and locate various types of material degradation through the interaction of shear-horizontal (SH) waves and Lamb waves with the material. Magnetostrictive transducers (MSTs) can be used to generate and receive both SH and Lamb waves and yet their characteristics have not been thoroughly studied, certainly not on par with piezoelectric transducers. A series of multiphysics simulations of the MST/plate system is conducted to investigate the characteristics of MSTs that affect guided wave generation and reception. The results are presented in the vein of showing the flexibility that MSTs provide for guided waves in a diverse range of applications. In addition to studying characteristics of the MST components (i.e., the magnetostrictive layer, meander electric coil, and biased magnetic field), single-sided and double-sided MSTs are compared for preferential wave mode generation. The wave mode control principle is based on the activation line for phase velocity dispersion curves, whose slope is the wavelength, which is dictated by the meander coil spacing. A double-sided MST with in-phase signals preferentially excites symmetric SH and Lamb modes, while a double-sided MST with out-of-phase signals preferentially excites antisymmetric SH and Lamb modes. All attempted single-mode actuations with double-sided MSTs were successful, with the SH3 mode actuated at 922 kHz in a 6-mm-thick plate being the highest frequency. Additionally, the results show that increasing the number of turns in the meander coil enhances the sensitivity of the MST as a receiver and substantially reduces the frequency bandwidth.

Sign in / Sign up

Export Citation Format

Share Document