scholarly journals Phenyl-C61-Butyric Acid Methyl Ester Hybrid Solution for Efficient CH3NH3PbI3 Perovskite Solar Cells

2019 ◽  
Vol 11 (14) ◽  
pp. 3867
Author(s):  
MiJoung Kim ◽  
MoonHoe Kim ◽  
JungSeock Oh ◽  
NamHee Kwon ◽  
Yoonmook Kang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Absorber Layer ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

Organic–inorganic halide perovskite solar cells (PSCs) have excellent chemical, electronic, and optical properties, making them attractive next-generation thin-film solar cells. Typical PSCs were fabricated with a perovskite absorber layer between the TiO2 electron-transport layer (ETL) and the 2,2′,7,7′-tetrakis-(N,N-di-4-methoxyphenylamino)-9,9′-spirobifluorene (Spiro-OMeTAD) hole-transport layer (HTL). We examined the influence of phenyl-C61-butyric acid methyl ester (PCBM) on the PSC device. PSCs using the PCBM layer as an ETL were investigated, and the absorber layer was coated by dissolving PCBM in a methyl ammonium lead iodide (MAPbI3) precursor solution to examine the changes at the perovskite interface and inside the perovskite absorber layer. The PSCs fabricated by adding a small amount of PCBM to the MAPbI3 solution exhibited a significantly higher maximum efficiency of 16.55% than conventional PSCs (14.34%). Fabricating the PCBM ETL and PCBM-MAPbI3 hybrid solid is expected to be an efficient route for improving the photovoltaic performance.

Enhanced efficiency and air-stability of NiOX-based perovskite solar cells via PCBM electron transport layer modification with Triton X-100

Nanoscale ◽  
2017 ◽  
Vol 9 (42) ◽  
pp. 16249-16255 ◽  
Author(s):  
Kisu Lee ◽  
Jaehoon Ryu ◽  
Haejun Yu ◽  
Juyoung Yun ◽  
Jungsup Lee ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Photovoltaic Performance ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Triton X

In this work, a phenyl-C61-butyric acid methyl ester (PCBM) electron transport layer was modified with Triton X-100, and this improved the photovoltaic performance and air-stability of perovskite solar cells.

Elucidating the mechanisms underlying PCBM enhancement of CH3NH3PbI3 perovskite solar cells using GIXRD and XAFS

2020 ◽  
Vol 8 (6) ◽  
pp. 3145-3153 ◽  
Author(s):  
Bing Liu ◽  
Rongli Cui ◽  
Huan Huang ◽  
Xihong Guo ◽  
Jinquan Dong ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Active Layer ◽  
Butyric Acid ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
The Stability

In this study, the stability mechanism of the optimized methyl ammonium lead triiodide (CH3NH3PbI3, MAPbI3)/[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) perovskite active layer upon exposure to moisture, light, and heating was investigated.

One-dimensional (1D) [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanorods as an efficient additive for improving the efficiency and stability of perovskite solar cells

2016 ◽  
Vol 4 (22) ◽  
pp. 8566-8572 ◽  
Author(s):  
Chenxin Ran ◽  
Yonghua Chen ◽  
Weiyin Gao ◽  
Minqiang Wang ◽  
Liming Dai
Keyword(s):  
Grain Size ◽  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
One Dimensional ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

We report a novel 1DPCBM nanorod material as an efficient additive to form a wrinkle-like bicontinuousperovskite layer, where 1D PCBM nanorods can distribute homogenously throughout the film with an enlarged grain size.

Morphology fixing agent for [6,6]-phenyl C61-butyric acid methyl ester (PC60BM) in planar-type perovskite solar cells for enhanced stability

RSC Advances ◽  
2016 ◽  
Vol 6 (57) ◽  
pp. 51513-51519 ◽  
Author(s):  
Sunyong Ahn ◽  
Woongsik Jang ◽  
Jong Hyeok Park ◽  
Dong Hwan Wang
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Titanium Oxide ◽  
Perovskite Solar Cells ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester ◽  
Device Operation ◽  
Enhanced Stability

Enhanced stability of planar-type perovskite solar cells (PSCs) has been demonstrated by applying titanium oxide (TiOx) interlayer which acts as a morphological fixing agent for preseving delamication of PC60BM with long-term device operation.

A mono(carboxy)porphyrin-triazine-(bodipy)2triad as a donor for bulk heterojunction organic solar cells

2015 ◽  
Vol 3 (24) ◽  
pp. 6209-6217 ◽  
Author(s):  
Ganesh D. Sharma ◽  
S. A. Siddiqui ◽  
Agapi Nikiforou ◽  
Galateia E. Zervaki ◽  
Irene Georgakaki ◽  
...  
Keyword(s):  
Solar Cells ◽  
Methyl Ester ◽  
Butyric Acid ◽  
Organic Solar Cells ◽  
Bulk Heterojunction ◽  
Acid Methyl Ester ◽  
Solution Processed ◽  
Acid Methyl ◽  
Butyric Acid Methyl Ester

A mono(carboxy)porphyrin-triazine-(bodipy)2triad(PorCOOH)(BDP)2has been used as a donor with ([6,6]-phenyl C71butyric acid methyl ester) (PC71BM) as an acceptor, in BHJ - solution processed organic solar cells.

Sign in / Sign up

Export Citation Format

Share Document