scholarly journals Point Cloud Coding Solutions, Subjective Assessment and Objective Measures: A Case Study

Symmetry ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 1955
Author(s):  
Emil Dumic ◽  
Luis A. da Silva Cruz
Keyword(s):  
Point Cloud ◽  
Point Clouds ◽  
Quality Measures ◽  
Subjective Assessment ◽  
Subjective Quality ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Objective Quality

This paper presents a summary of recent progress in compression, subjective assessment and objective quality measures of point cloud representations of three dimensional visual information. Different existing point cloud datasets, as well as discusses the protocols that have been proposed to evaluate the subjective quality of point cloud data. Several geometry and attribute point cloud data objective quality measures are also presented and described. A case study on the evaluation of subjective quality of point clouds in two laboratories is presented. Six original point clouds degraded with G-PCC and V-PCC point cloud compression and five degradation levels were subjectively evaluated, showing high inter-laboratory correlation. Furthermore, performance of several geometry-based objective quality measures applied to the same data are described, concluding that the highest correlation with subjective scores is obtained using point-to-plane measures. Finally, several current challenges and future research directions on point clouds compression and quality evaluation are discussed.

Registration and Fusion of UAV LiDAR System Sequence Images and Laser Point Clouds

2020 ◽  
Author(s):  
Jiayong Yu ◽  
Longchen Ma ◽  
Maoyi Tian, ◽  
Xiushan Lu
Keyword(s):  
Point Cloud ◽  
Image Data ◽  
Point Clouds ◽  
Optical Image ◽  
Point Cloud Data ◽  
Feature Points ◽  
Lidar System ◽  
Registration Accuracy ◽  
Cloud Data ◽  
Intensity Image

The unmanned aerial vehicle (UAV)-mounted mobile LiDAR system (ULS) is widely used for geomatics owing to its efficient data acquisition and convenient operation. However, due to limited carrying capacity of a UAV, sensors integrated in the ULS should be small and lightweight, which results in decrease in the density of the collected scanning points. This affects registration between image data and point cloud data. To address this issue, the authors propose a method for registering and fusing ULS sequence images and laser point clouds, wherein they convert the problem of registering point cloud data and image data into a problem of matching feature points between the two images. First, a point cloud is selected to produce an intensity image. Subsequently, the corresponding feature points of the intensity image and the optical image are matched, and exterior orientation parameters are solved using a collinear equation based on image position and orientation. Finally, the sequence images are fused with the laser point cloud, based on the Global Navigation Satellite System (GNSS) time index of the optical image, to generate a true color point cloud. The experimental results show the higher registration accuracy and fusion speed of the proposed method, thereby demonstrating its accuracy and effectiveness.

scholarly journals Multi-Dimensional Underwater Point Cloud Detection Based on Deep Learning

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 884
Author(s):  
Chia-Ming Tsai ◽  
Yi-Horng Lai ◽  
Yung-Da Sun ◽  
Yu-Jen Chung ◽  
Jau-Woei Perng
Keyword(s):  
Deep Learning ◽  
Point Cloud ◽  
Three Dimensional ◽  
Point Clouds ◽  
Training Data ◽  
Network Architectures ◽  
Point Cloud Data ◽  
Data Types ◽  
Raw Data ◽  
Cloud Data

Numerous sensors can obtain images or point cloud data on land, however, the rapid attenuation of electromagnetic signals and the lack of light in water have been observed to restrict sensing functions. This study expands the utilization of two- and three-dimensional detection technologies in underwater applications to detect abandoned tires. A three-dimensional acoustic sensor, the BV5000, is used in this study to collect underwater point cloud data. Some pre-processing steps are proposed to remove noise and the seabed from raw data. Point clouds are then processed to obtain two data types: a 2D image and a 3D point cloud. Deep learning methods with different dimensions are used to train the models. In the two-dimensional method, the point cloud is transferred into a bird’s eye view image. The Faster R-CNN and YOLOv3 network architectures are used to detect tires. Meanwhile, in the three-dimensional method, the point cloud associated with a tire is cut out from the raw data and is used as training data. The PointNet and PointConv network architectures are then used for tire classification. The results show that both approaches provide good accuracy.

Automated Surface Inspection Using 3D Point Cloud Data in Manufacturing: A Case Study

2018 ◽  
Author(s):  
Romina Dastoorian ◽  
Ahmad E. Elhabashy ◽  
Wenmeng Tian ◽  
Lee J. Wells ◽  
Jaime A. Camelio
Keyword(s):  
Point Cloud ◽  
Surface Defect ◽  
Fault Location ◽  
Three Dimensional ◽  
Practical Case ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Defect Inspection ◽  
Cloud Data

With the latest advancements in three-dimensional (3D) measurement technologies, obtaining 3D point cloud data for inspection purposes in manufacturing is becoming more common. While 3D point cloud data allows for better inspection capabilities, their analysis is typically challenging. Especially with unstructured 3D point cloud data, containing coordinates at random locations, the challenges increase with higher levels of noise and larger volumes of data. Hence, the objective of this paper is to extend the previously developed Adaptive Generalized Likelihood Ratio (AGLR) approach to handle unstructured 3D point cloud data used for automated surface defect inspection in manufacturing. More specifically, the AGLR approach was implemented in a practical case study to inspect twenty-seven samples, each with a unique fault. These faults were designed to cover an array of possible faults having three different sizes, three different magnitudes, and located in three different locations. The results show that the AGLR approach can indeed differentiate between non-faulty and a varying range of faulty surfaces while being able to pinpoint the fault location. This work also serves as a validation for the previously developed AGLR approach in a practical scenario.

scholarly journals Geometry Extraction for High Resolution Building Energy Modelling Applications from Point Cloud Data: A Case Study of a Factory Facility

2017 ◽  
Vol 142 ◽  
pp. 1805-1810 ◽  
Author(s):  
Tom Lloyd Garwood ◽  
Ben Richard Hughes ◽  
Dominic O’Connor ◽  
John K Calautit ◽  
Michael R Oates ◽  
...  
Keyword(s):  
High Resolution ◽  
Point Cloud ◽  
Building Energy ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Energy Modelling

scholarly journals THE POWER LINE HEIGHT ANALYSIS CHART DRAWING BASE ON MAPMATRIX

2020 ◽  
Vol XLII-3/W10 ◽  
pp. 327-333
Author(s):  
Y. R. He ◽  
W. W. Ma ◽  
X. R. Wang ◽  
J. Q. Dai ◽  
J. L. Zheng
Keyword(s):  
Point Cloud ◽  
Remote Sensing Data ◽  
Field Investigation ◽  
Power Line ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Binocular Stereo Vision ◽  
Binocular Stereo ◽  
Aerial Vehicle

Abstract. The power patrol has been completed by manual field investigation, which is inefficient, costly and unsafe. In order to extract the height of the power line and its surrounding ground objects more quickly and conveniently, and better service for power line patrol. This paper uses remote sensing data of unmanned aerial vehicle to carry out aerial triangulation, stereo model establishment and binocular stereo vision height extraction base on MapMatrix software, then obtains the power line height analysis chart. Then LiDAR point cloud data is used to verify the accuracy of the power line height analysis chart. The results show that this method not only meets the standard of power line patrol, but also improves the efficiency and quality of power line patrol.

scholarly journals VISUALIZATION OF THE CONSTRUCTION OF ANCIENT ROMAN BUILDINGS IN OSTIA USING POINT CLOUD DATA

2017 ◽  
Vol XLII-2/W3 ◽  
pp. 345-352
Author(s):  
Y. Hori ◽  
T. Ogawa
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Feature Matching ◽  
Three Dimensional ◽  
Point Clouds ◽  
Final Report ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Coverage Accuracy ◽  
New Research

The implementation of laser scanning in the field of archaeology provides us with an entirely new dimension in research and surveying. It allows us to digitally recreate individual objects, or entire cities, using millions of three-dimensional points grouped together in what is referred to as "point clouds". In addition, the visualization of the point cloud data, which can be used in the final report by archaeologists and architects, should usually be produced as a JPG or TIFF file. Not only the visualization of point cloud data, but also re-examination of older data and new survey of the construction of Roman building applying remote-sensing technology for precise and detailed measurements afford new information that may lead to revising drawings of ancient buildings which had been adduced as evidence without any consideration of a degree of accuracy, and finally can provide new research of ancient buildings. We used laser scanners at fields because of its speed, comprehensive coverage, accuracy and flexibility of data manipulation. Therefore, we “skipped” many of post-processing and focused on the images created from the meta-data simply aligned using a tool which extended automatic feature-matching algorithm and a popular renderer that can provide graphic results.

scholarly journals Modeling and Processing of Smart Point Clouds of Cultural Relics with Complex Geometries

2021 ◽  
Vol 10 (9) ◽  
pp. 617
Author(s):  
Su Yang ◽  
Miaole Hou ◽  
Ahmed Shaker ◽  
Songnian Li
Keyword(s):  
Point Cloud ◽  
Semantic Information ◽  
Point Clouds ◽  
Information Modeling ◽  
Complex Geometries ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Modeling Framework ◽  
Cloud Data ◽  
Cultural Relics

The digital documentation of cultural relics plays an important role in archiving, protection, and management. In the field of cultural heritage, three-dimensional (3D) point cloud data is effective at expressing complex geometric structures and geometric details on the surface of cultural relics, but lacks semantic information. To elaborate the geometric information of cultural relics and add meaningful semantic information, we propose a modeling and processing method of smart point clouds of cultural relics with complex geometries. An information modeling framework for complex geometric cultural relics was designed based on the concept of smart point clouds, in which 3D point cloud data are organized through the time dimension and different spatial scales indicating different geometric details. The proposed model allows smart point clouds or a subset to be linked with semantic information or related documents. As such, this novel information modeling framework can be used to describe rich semantic information and high-level details of geometry. The proposed information model not only expresses the complex geometric structure of the cultural relics and the geometric details on the surface, but also has rich semantic information, and can even be associated with documents. A case study of the Dazu Thousand-Hand Bodhisattva Statue, which is characterized by a variety of complex geometries, reveals that our proposed framework is capable of modeling and processing the statue with excellent applicability and expansibility. This work provides insights into the sustainable development of cultural heritage protection globally.

Registration and Fusion of UAV LiDAR System Sequence Images and Laser Point Clouds

2021 ◽  
Vol 65 (1) ◽  
pp. 10501-1-10501-9
Author(s):  
Jiayong Yu ◽  
Longchen Ma ◽  
Maoyi Tian ◽  
Xiushan Lu
Keyword(s):  
Point Cloud ◽  
Image Data ◽  
Point Clouds ◽  
Optical Image ◽  
Point Cloud Data ◽  
Feature Points ◽  
Lidar System ◽  
Registration Accuracy ◽  
Cloud Data ◽  
Intensity Image

Abstract The unmanned aerial vehicle (UAV)-mounted mobile LiDAR system (ULS) is widely used for geomatics owing to its efficient data acquisition and convenient operation. However, due to limited carrying capacity of a UAV, sensors integrated in the ULS should be small and lightweight, which results in decrease in the density of the collected scanning points. This affects registration between image data and point cloud data. To address this issue, the authors propose a method for registering and fusing ULS sequence images and laser point clouds, wherein they convert the problem of registering point cloud data and image data into a problem of matching feature points between the two images. First, a point cloud is selected to produce an intensity image. Subsequently, the corresponding feature points of the intensity image and the optical image are matched, and exterior orientation parameters are solved using a collinear equation based on image position and orientation. Finally, the sequence images are fused with the laser point cloud, based on the Global Navigation Satellite System (GNSS) time index of the optical image, to generate a true color point cloud. The experimental results show the higher registration accuracy and fusion speed of the proposed method, thereby demonstrating its accuracy and effectiveness.

scholarly journals A Simple Semantic-Based Data Storage Layout for Querying Point Clouds

2020 ◽  
Vol 9 (2) ◽  
pp. 72 ◽  
Author(s):  
Sami El-Mahgary ◽  
Juho-Pekka Virtanen ◽  
Hannu Hyyppä
Keyword(s):  
Data Storage ◽  
Point Cloud ◽  
Point Clouds ◽  
Database Management System ◽  
Programming Approach ◽  
Point Cloud Data ◽  
Data Layout ◽  
Cloud Data ◽  
Semantic Point ◽  
Relational Database Management

The importance of being able to separate the semantics from the actual (X,Y,Z) coordinates in a point cloud has been actively brought up in recent research. However, there is still no widely used or accepted data layout paradigm on how to efficiently store and manage such semantic point cloud data. In this paper, we present a simple data layout that makes use the semantics and that allows for quick queries. The underlying idea is especially suited for a programming approach (e.g., queries programmed via Python) but we also present an even simpler implementation of the underlying technique on a well known relational database management system (RDBMS), namely, PostgreSQL. The obtained query results suggest that the presented approach can be successfully used to handle point and range queries on large points clouds.

Sign in / Sign up

Export Citation Format

Share Document