scholarly journals Effects of Dynamical Change in Water Level on Local Scouring around Bridge Piers Based on In-Situ Experiments

Water ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3015
Author(s):  
Takuma Kadono ◽  
Sho Kato ◽  
Shinichiro Okazaki ◽  
Toshinori Matsui ◽  
Yoshio Kajitani ◽  
...  

To evaluate the stability of bridge piers affected by the local scouring, the existing formulas for estimating the maximum local scour depth have been developed based on the results of experiments conducted under a constant water level. However, the applicability of these formulas to the cases where the water level rises and falls, such as a water level change in a real river, is not clear. In this study, water flow experiments were conducted on cylindrical and oval bridge pier models to investigate the effect of iterated water level change on the progression of local scour around piers. Results of experiments with cylindrical and oval pier showed that the local scour depth and length increased by an iterated action of the water level change; however, these values converged after the number of iterated actions reached a certain time. The local scour length at upstream of the bridge pier was approximately 1.8 times larger than the theoretical value, which was calculated through the local scour depth and angle of repose in water. The local scour length is an important parameter for defining the streambed protection zone, which is one of the measures against local scour, and we showed that the streambed protection zone needs to be defined more widely.

2020 ◽  
Vol 144 ◽  
pp. 01008
Author(s):  
Shaolin Yue ◽  
Huan Zhou ◽  
Wenlong Zhu ◽  
Minxi Zhang

The riverbeds or sea beds are usually composed of multi-layers of sediments. The scour around bridge piers sited on such beds is vital to the bridge safety, but is still very difficult to be predicated as its complicated interaction between the flow and bed layers. A simple model is proposed in this study for calculating the local scour maximum depth around bridge piers sited on multi-layer of sedimentary bed, which is based on HEC-18 formula revised by Richardson and Davis (2001) and the formula of the repose angle of sediment particles proposed by Cheng (1993). This model considers the particle sorting when the scour proceeds. An application of the model into the local scour depth of Guopan bridge pier sited on the Weihe River bed in Baoji city of China preliminarily demonstrates its reliability to calculate the local scour maximum depth around bridge piers sited on multi-layer of sedimentary bed.


2020 ◽  
Vol 6 (1) ◽  
pp. 69-84 ◽  
Author(s):  
Habibeh Ghodsi ◽  
Mohammad Javad Khanjani

Scour depth prediction is a vital issue in bridge pier design. Recently, good progress has been made in the development of artificial intelligence (AI) to predict scour depth around hydraulic structures base such as bridge piers. In this study, two hybrid intelligence models based on combination of group method of data handling (GMDH) with harmony search algorithm (HS) and shuffled complex evolution (SCE) have been developed to predict local scour depth around complex bridge piers using 82 laboratory data measured by authors and  615 data points from published literature. The results were compared to conventional GMDH models with two kinds of transfer functions called GMDH1 and GMDH2. Based upon the pile cap location, data points were divided into three categories. The performance of all utilized models was evaluated by the statistical criteria of R, RMSE, MAPE, BIAS, and SI. Performances of developed models were evaluated by experimental data points collected in laboratory experiments, together with commonly empirical equations. The results showed that GMDH2SCE was the superior model in terms of all statistical criteria in training when the pile cap was above the initial bed level and completely buried pile cap. For a partially-buried pile cap, GMDH1SCE offered the best performance. Among empirical equations, HEC-18 produced relatively good performances for different types of complex piers. This study recommends hybrid GMDH models, as powerful tools in complex bridge pier scour depth prediction.


2020 ◽  
Vol 20 (3) ◽  
pp. 1006-1015 ◽  
Author(s):  
A. Bestawy ◽  
T. Eltahawy ◽  
A. Alsaluli ◽  
A. Almaliki ◽  
M. Alqurashi

Abstract Local scour around bridge piers is one of the main causes of bridge failure all over the world. Experimental and hydraulic models were carried out to investigate two types of scour reduction methods around a single cylindrical pier, namely the pier's slots and collars. The efficiency of various types of pier slots and circular collars around the pier's base in reducing scour were studied. A new shape of a conical collar was developed by the authors and examined along with other shapes. The results revealed that collars, in general, have more influence in reducing scour depth than slots made in the front and rear of bridge piers. The sigma-slot acts better than other tested slots, with a reduction in the scour depths of 59.3% and 52.8% at the upstream and downstream of the pier, respectively. On the other hand, the conical collar appeared to be the most effective collar shape in reducing the scour around the bridge pier, with a 61.1% reduction in the scour depth downstream of the pier. A three-dimensional laser scanner was used to capture the bed topography at the end of each experiment and contour maps of the deformed bed were produced. A one-dimensional Hydrologic Engineering Center-River Analysis System model was developed with a single bridge pier to predict the scour depth around the pier in an attempt to introduce new values for the pier nose shape factor, , which describes the tested piers.


2016 ◽  
Vol 2016 ◽  
pp. 1-19 ◽  
Author(s):  
Youssef I. Hafez

Most existing equations for predicting local scour at bridge piers suffer from overprediction of the scour depths which results in higher foundation costs. To tackle this problem, a mathematical model for predicting bridge pier scour is developed herein based on an energy balance theory. The present study equation was compared to commonly used bridge scour equations using scour field data in USA. The developed equation has several advantages among which we have the following: it adds to the understanding of the physics of bridge pier scour, is valid for slender and wide piers, does not suffer from overprediction of scour depths, addresses clear water and live bed scour, and includes the effects of various characteristics of the bed material such as specific gravity (or density), porosity, size, and angle of repose. In addition, the developed equation accounts for the debris effect and aids in the design of scour mitigation methods such as collars, side bars, slots, and pier protective piles.


2003 ◽  
Vol 30 (17) ◽  
pp. n/a-n/a ◽  
Author(s):  
Chi-Yuen Wang ◽  
Douglas S. Dreger ◽  
Chung-Ho Wang ◽  
Daniel Mayeri ◽  
James G. Berryman

2018 ◽  
Vol 13 (2) ◽  
pp. 110-120 ◽  
Author(s):  
Ibtesam Abudallah Habib ◽  
Wan Hanna Melini Wan Mohtar ◽  
Atef Elsaiad ◽  
Ahmed El-Shafie

This study investigates the performance nose-angle piers as countermeasures for local scour reduction around piers. Four nose angles were studied, i.e., 90°, 70°, 60° and 45° and tested in a laboratory. The sediment size was fixed at 0.39 mm whereas the flow angle of attack (or skew angle) was varied at four angles, i.e., skew angles, i.e., 0°, 10°, 20° and 30°. Scour reduction was clear when decreasing nose angles and reached maximum when the nose angle is 45°. Increasing the flow velocity and skew angle was subsequently increasing the scour profile, both in vertical and transversal directions. However, the efficiency of nose angle piers was only high at low Froude number less than 0.40 where higher Froude number gives minimal changes in the maximum scour depth reduction. At a higher skew angle, although showed promising maximum scour depth reduction, the increasing pier projected width resulted in the increase of transversal lengths.


Sign in / Sign up

Export Citation Format

Share Document