Cultivator repair and adjustment manual

2020 ◽  
pp. 24-34
Keyword(s):  
Best Practices ◽  
Technical Service ◽  
Agricultural Machinery ◽  
Design Features ◽  
Safe Operation ◽  
Research Institutes ◽  
Machine Operators

The manual on repair and adjustment of cultivators is intended for farmers, machine operators and specialists engaged in technical service of agricultural machinery in farms and at repair and maintenance enterprises. Documentation from manufacturers, materials from research institutes, and best practices in cultivator repair were used in the development of the manual. The manual contains the main requirements that ensure the operability of cultivators, as well as measures for safe operation during their repair. Provides instructions for the preparation of the cultivators to work. These are the main recommendations for servicing cultivators KPS-4, KRN-5.6B, KRN-4.2B, which can be extended to other types of cultivators, taking into account their design features.

Guidelines for the repair and adjustment of combine harvesters

2020 ◽  
pp. 18-31
Author(s):  
M. N. Kostomakhin
Keyword(s):  
Federal State ◽  
Technical Service ◽  
Agricultural Machinery ◽  
Safety Measures ◽  
Advanced Experience ◽  
Machine Operators ◽  
Combine Harvesters

Guidelines for the repair and adjustment of forage harvesters KPU-75, KPI-2,4, KIK-3000 "Polesie", KSS-2,6A-1, KSS-1,8 are intended for farmers, machine operators and specialists engaged in technical service and operation of agricultural machinery in farms and repair and maintenance enterprises. When developing recommendations, we used the documentation of manufacturers, materials of the Federal state budgetary institution VIM (GOSNITI) and advanced experience in repairing forage harvesting equipment. The fi rst part of the recommendations contains the main requirements that ensure the performance of forage harvesters, as well as safety measures for their repair. The second part of the recommendations provides instructions on how to prepare forage harvesters for operation.

Repair and adjustment of forage harvesters

2020 ◽  
pp. 30-57
Author(s):  
M. Kostomakhin
Keyword(s):  
Technical Service ◽  
Agricultural Machinery ◽  
Safety Measures ◽  
Advanced Experience ◽  
Machine Operators

The article presents recommendations for the repair and adjustment of forage trailed (mounted) harvesters KPKU-75, KPI-2,4, KIK-3000 "Polesie", KSS-2,6 A-1, KS-1,8 is intended for farmers, machine operators and professionals engaged in technical service and operation of agricultural machinery in farms and repair and maintenance enterprises. Documentation of manufacturers, materials of VIM (GOSNITI) and advanced experience of repair of forage equipment were used in development of recommendations. The fi rst part of the recommendations contains the basic requirements that ensure the performance of forage harvesters, as well as safety measures during their repair. In the second part will be given instructions on the preparation of forage harvesters to work.

ORGANIZATIONAL AND TECHNOLOGICAL PRINCIPLES FOR CREATION INNOVATION CENTERS

2020 ◽  
Vol 4 (141) ◽  
pp. 40-46
Author(s):  
ZOYA MISHINA ◽  
Keyword(s):  
Research Purpose ◽  
Service Research ◽  
Industrial Complex ◽  
Technological Equipment ◽  
Technical Service ◽  
Agricultural Machinery ◽  
Efficient Operation ◽  
Technological Base ◽  
Reliability Of Operation ◽  
Production Areas

Timely conducting of all types of maintenance and routine repairs is possible only in the conditions of an innovative service center, equipped with the necessary equipment and having a complex of facilities to ensure favorable conditions for technical service. (Research purpose) The research purpose is in identifying opportunities for updating the technical service system in the agro-industrial complex by creating innovative service centers to ensure highly efficient operation of agricultural machinery and equipment. (Materials and methods) The system of maintenance in agriculture is characterized by a significant decrease in efficiency due to physical and moral wear of equipment of repair and technical enterprises, low level and insufficient qualification of personnel and managers of enterprises of the agro-industrial complex. The availability of existing enterprises of the agro-industrial complex with production areas is no more than 50 percent, technological equipment is no more than 47 percent, and technological equipment and equipment for jobs are 15 and 40 percent. (Results and discussion) The modernization of the infrastructure of technical service of agricultural machinery is aimed at updating the technological base of machine repair. Repair and technical enterprises do not have the necessary equipment to perform a number of maintenance and routine repairs. The process of developing technical service infrastructure is significantly behind the level of structural and technological complexity of agricultural machinery. Due to technological requirements, complex components and assemblies, such as engines, hydraulic equipment, fuel pumps of domestic and imported agricultural machinery should not be repaired in the conditions of farms. (Conclusions) The high technological level of innovative technical service centers serves as a condition for efficient operation of production, ensuring its stability and reliability of operation, flexibility and adaptability, high intensity and waste-free operation.

Organizational and technological principles for improving technical service in the agro-industrial complex

2020 ◽  
pp. 4-9
Author(s):  
Z. N. Mishina
Keyword(s):  
High Capacity ◽  
Industrial Complex ◽  
Technological Equipment ◽  
Technical Service ◽  
Agricultural Machinery ◽  
Efficient Operation ◽  
Reliable Assessment ◽  
Technological Base ◽  
Technological Level ◽  
Reliability Of Operation

To ensure highly efficient operation of agricultural machinery and equipment, it is necessary to improve the system of technical services in agriculture by creating specialized service centers. The system of maintenance in agriculture is characterized by a significant decrease in efficiency due to critical physical and moral wear of equipment of repair and technical enterprises (RTP), low level and insufficient qualification of Executive personnel and managers of enterprises of the agro-industrial complex (AIC). These changes led to the loss of the majority of RTP for agriculture and their re-equipment for non-agricultural production. According to experts, in the service sectors of agriculture, there was a loss of technological production and a significant part of applied science. This is especially worrisome due to the catastrophic aging of cars and the lack of funds to replace them. It is necessary to improve the General condition of the equipment of repair shops, the availability of existing agricultural enterprises with production areas is no more than 50%, technological equipment — no more than 47%, and technological equipment and equipment of workplaces — 15% — 40%, respectively. The priority areas of modernization of the infrastructure of technical service of agricultural machinery are related to updating the technological base of machine repair. Based on a reliable assessment and analysis of the technological level of RTP, which takes into account a number of technological, technical, organizational and environmental factors of production. RTP does not have the necessary equipment and devices to perform a number of maintenance and maintenance operations. The process of developing the technical service infrastructure lags far behind the level of structural and technological complexity of agricultural machinery. Due to technological requirements, such complex components and assemblies as engines, hydraulic equipment, fuel pumps of domestic and imported agricultural machinery should not be repaired in the conditions of farms. In a number of works proved the following provision: evaluation of the technological level repair enterprises shall be based on the application of such methods and means of technological preparation of production, which correspond to the advanced achievements of science and technology, and provide high-capacity system maintenance to continuous improvement. A high technological level of technical service enterprises is a condition for efficient operation of any type of production, ensuring its stability and reliability of operation, flexibility and adaptability, high intensity and waste-free operation.

scholarly journals Using mouse cursor tracking to investigate online cognition: Preserving methodological ingenuity while moving towards reproducible science

2019 ◽  
Author(s):  
Martin Schoemann ◽  
Denis O'Hora ◽  
Rick Dale ◽  
Stefan Scherbaum
Keyword(s):  
Best Practices ◽  
Cognitive Processes ◽  
Sampling Rate ◽  
Mouse Tracking ◽  
Design Features ◽  
Systematic Analysis ◽  
Reporting Practices ◽  
Psychological Science ◽  
Response Deadline ◽  
Mouse Cursor

Mouse cursor tracking has become a prominent method for characterizing cognitive processes, used in a wide variety of domains of psychological science. Researchers have demonstrated considerable ingenuity in the application of the approach, but the methodology has not undergone systematic analysis to facilitate the development of best practices. Furthermore, recent research has demonstrated effects of experimental design features on a number of mouse-tracking outcomes. We conducted a systematic review of the mouse-tracking literature to survey the reporting and spread of mouse variables (Cursor speed, Sampling rate), physical characteris-tics of the experiments (Stimulus position, Response box position) and response requirements (Start procedure, Response procedure, Response deadline). This survey reveals that there is room for improvement in reporting practices, especially of subtler design features that researchers may have assumed would not impact research results (e.g., Cursor speed). We provide recommendations for future best practices in mouse-tracking studies and consider how best to standardize the mouse-tracking literature without excessively constraining the methodological flexibility that is essential to the field.

On the issues of creating a unit (section) for the disposal of equipment at the enterprises of the engineering service apk

2020 ◽  
pp. 4-11
Author(s):  
V. I. Ignatov ◽  
V. S. Gerasimov ◽  
D. V. Andreeva
Keyword(s):  
Agricultural Productivity ◽  
Technical Service ◽  
Agricultural Machinery ◽  
Noticeable Effect ◽  
Secondary Resources ◽  
Agricultural Equipment ◽  
The Creation ◽  
Recycled Waste ◽  
Agricultural Machines

According to forecasts for 2022, the number of self-propelled agricultural equipment that will fail will be about 100 thousand units. This will have a fairly noticeable effect on overall agricultural productivity. The paper analyzes the main technological aspects of the possibility of creating a unit (section) for the utilization of agricultural machinery, taking into account the standards of a typical enterprise for technical service. The presented recommendations enable specialized enterprises engaged in the disposal of equipment to quickly carry out work on the creation of a unit (section) for recycling machines, which will make it possible to maximize the production of secondary resources from recycled waste of agricultural machines.

scholarly journals Safe operation of mini UAVs: a review of regulation and best practices

2015 ◽  
Vol 29 (19) ◽  
pp. 1221-1233 ◽  
Author(s):  
D. Sanz ◽  
J. Valente ◽  
J. del Cerro ◽  
J. Colorado ◽  
A. Barrientos
Keyword(s):  
Best Practices ◽  
Safe Operation

scholarly journals Facilities Planning for Safety and Emergency Response: Bridging the Gap between Design Features and Safety Planning

2013 ◽  
Vol 56 (1) ◽  
pp. 17-28
Author(s):  
Steve Schultz ◽  
Jack Paul
Keyword(s):  
Emergency Response ◽  
Building Construction ◽  
Building Code ◽  
Safety Planning ◽  
Design Features ◽  
Safe Operation ◽  
Facilities Planning ◽  
Safety Considerations ◽  
Code Provisions ◽  
Design And Construction

This article describes some of the safety considerations for the design and construction of micro/nano facilities and applicable building code provisions. The two key elements required for safe operation in micro and nanotechnology facilities are: (1) engineered features incorporated into building construction, and (2) administrative features that deal with how people work within the facility.

Sign in / Sign up

Export Citation Format

Share Document