Packaging. Sacks made from thermoplastic flexible film. Tear propagation on edge folds

2015 ◽  
1997 ◽  
Vol 117 (8) ◽  
pp. 413-419 ◽  
Author(s):  
Shinji Kaneko ◽  
Nobuyoshi Asaoka ◽  
Hiroshi Tosaka ◽  
Ryo Ota ◽  
Kazuhisa Yanagisawa

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 795
Author(s):  
Xiaochao Tian ◽  
Yuze Sun ◽  
Zhiyao Li ◽  
Hu Wang ◽  
Zhicong Wang ◽  
...  

This paper describes the design of a piezoelectric-driven hydraulically amplified Braille-flexible bump device that enables the flexible formation of Braille characters. A piezoelectric vibrator is used to excite fluid resonance in a cavity, and displacement is realized by compressing the fluid, allowing Braille character dots to be formed. First, the structural design and working principle of the device, as well as the method used to drive the fluid, are explained. Expressions for the output displacement and amplification ratio of the flexible film and piezoelectric vibrator are then obtained through kinetic analysis of the system unit. Subsequently, the structural parameters that affect the output displacement and the liquid amplification are described. Finally, experimental tests of the system are explained. The results indicate that the output displacement of the contact formed by the flexible film reaches 0.214 mm, satisfying the requirements of the touch sensitivity standard for the blind, when the fluid cavity diameter measures 31 mm and the resonance frequency is 375.4 Hz. The corresponding water discharge is 8.8 mL. This study proves that constructing a Braille bump device in this way is both feasible and effective.


2021 ◽  
Vol 6 (51) ◽  
pp. eabc8801
Author(s):  
Youcan Yan ◽  
Zhe Hu ◽  
Zhengbao Yang ◽  
Wenzhen Yuan ◽  
Chaoyang Song ◽  
...  

Human skin can sense subtle changes of both normal and shear forces (i.e., self-decoupled) and perceive stimuli with finer resolution than the average spacing between mechanoreceptors (i.e., super-resolved). By contrast, existing tactile sensors for robotic applications are inferior, lacking accurate force decoupling and proper spatial resolution at the same time. Here, we present a soft tactile sensor with self-decoupling and super-resolution abilities by designing a sinusoidally magnetized flexible film (with the thickness ~0.5 millimeters), whose deformation can be detected by a Hall sensor according to the change of magnetic flux densities under external forces. The sensor can accurately measure the normal force and the shear force (demonstrated in one dimension) with a single unit and achieve a 60-fold super-resolved accuracy enhanced by deep learning. By mounting our sensor at the fingertip of a robotic gripper, we show that robots can accomplish challenging tasks such as stably grasping fragile objects under external disturbance and threading a needle via teleoperation. This research provides new insight into tactile sensor design and could be beneficial to various applications in robotics field, such as adaptive grasping, dexterous manipulation, and human-robot interaction.


Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1583
Author(s):  
Justyna Kasińska ◽  
Marek Matejka ◽  
Dana Bolibruchová ◽  
Michal Kuriš ◽  
Lukáš Širanec

The main reason for the use of returnable material, or recycled alloys, is a cost reduction while maintaining the final properties of the casting. The casting resulting quality is directly related to the correct ratio of commercial grade alloy and alloy made by remelting the returnable material in the batch. The casting quality is also affected by the purity of the secondary raw materials used, the shape complexity and the use of the casting itself. The presented article focuses on the effect of increasing the returnable material content in the batch on the hot tearing susceptibility of AlSi9Cu3 alloy. Hot tears are a complex phenomenon that combines metallurgical and thermo-mechanical interactions of the cast metal. Hot tearing susceptibility was evaluated on the basis of quantitative (HTS — hot tearing susceptibility index) and qualitative evaluation. The negative effect of returnable material in the batch was already manifested at a 20% content in the batch. The critical proportion of the returnable alloy in the batch can be stated as 50%. The alloy with a 50% returnable material content manifested insufficient results of the HTS index and qualitative evaluation, which means increased sensitivity to tearing. The negative effect of returnable material and the increased sensitivity were also confirmed in the evaluation of the fracture surface and hot tear profile. The microstructure of alloys with 50% and higher proportion of returnable material was characterized by a higher amount of iron phases (mainly Al5FeSi), whose sharp ends acted as critical regions of hot tearing and subsequent hot tear propagation, which had a major impact on the increase in hot tearing susceptibility.


Nanoscale ◽  
2014 ◽  
Vol 6 (6) ◽  
pp. 3361 ◽  
Author(s):  
Subramani Thiyagu ◽  
Chen-Chih Hsueh ◽  
Chien-Ting Liu ◽  
Hong-Jhang Syu ◽  
Tzu-Ching Lin ◽  
...  

RSC Advances ◽  
2016 ◽  
Vol 6 (60) ◽  
pp. 55546-55551 ◽  
Author(s):  
Shu-Qing Lv ◽  
Ya-Fei Pan ◽  
Pei-Bo Yang ◽  
Guang-Sheng Wang

By using a simple wet chemical method and hot-molding procedure, a kind of flexible film with enhance absorption properties based on binary cobalt nanochains/polyvinylidene fluoride (PVDF) hybrids has been successfully fabricated.


Sign in / Sign up

Export Citation Format

Share Document