scholarly journals Tinjauan Hambatan pada Rancangan Kapal Tongkang Tanpa Awak Menggunakan Metode Computational Fluid Dynamics - OpenFOAM

2019 ◽  
Vol 9 (2) ◽  
pp. 382
Author(s):  
Abrari Noor Hasmi ◽  
Samsu Dlukha Nurcholik ◽  
Samsu Dlukha Nurcholik ◽  
Muhammad Budi Prasetyo ◽  
Muhammad Budi Prasetyo ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Navier Stokes

Di Indonesia, proses pengiriman batubara dengan kapal tongkang banyak dijumpai karena kemudahan aksesnya dimana kapal tongkang memiliki sarat air (draft) yang lebih kecil dibandingkan dengan jenis kapal lain. Penelitian ini mencoba menentukan hambatan pada kapal tanpa awak berbentuk kapal tongkang untuk beberapa kecepatan menggunakan metode CFD dengan program OpenFOAM. Metode ini mendiskritisasi persamaan Navier Stokes dengan menggunakan pendekatan metode volume hingga. Kapal tongkang digambar menggunakan perangkat lunak Maxsurf modeler sebelum diintegrasikan kedalam program CFD. Diskritisasi dilakukan dengan memastikan area sekitar lambung kapal terdiskritisasi cukup rapat. Hasil penelitian menunjukan bahwa Hambatan pada kapal tongkang berkisar antara 39.39kN-227.963kN untuk kecepatan 3-9knot.

scholarly journals Computational Analysis to Factor Wind into the Design of an Architectural Environment

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Hassam Nasarullah Chaudhry ◽  
John Kaiser Calautit ◽  
Ben Richard Hughes
Keyword(s):  
Fluid Dynamics ◽  
Power Generation ◽  
Computational Fluid Dynamics ◽  
Three Dimensional ◽  
Numerical Data ◽  
Navier Stokes ◽  
Windward Side ◽  
Average Value ◽  
Continuity Equations ◽  
Prevailing Wind Direction

The effect of wind distribution on the architectural domain of the Bahrain Trade Centre was numerically analysed using computational fluid dynamics (CFD). Using the numerical data, the power generation potential of the building-integrated wind turbines was determined in response to the prevailing wind direction. The three-dimensional Reynolds-averaged Navier-Stokes (RANS) equations along with the momentum and continuity equations were solved for obtaining the velocity and pressure field. Simulating a reference wind speed of 6 m/s, the findings from the study quantified an estimate power generation of 6.4 kW indicating a capacity factor of 2.9% for the benchmark model. At the windward side of the building, it was observed that the layers of turbulence intensified in inverse proportion to the height of the building with an average value of 0.45 J/kg. The air velocity was found to gradually increase in direct proportion to the elevation with the turbine located at higher altitude receiving maximum exposure to incoming wind. This work highlighted the potential of using advanced computational fluid dynamics in order to factor wind into the design of any architectural environment.

scholarly journals Three-Dimensional Aerodynamic Analysis of a Darrieus Wind Turbine Blade Using Computational Fluid Dynamics and Lifting Line Theory

2017 ◽  
Author(s):  
Francesco Balduzzi ◽  
Alessandro Bianchini ◽  
Giovanni Ferrara ◽  
David Marten ◽  
George Pechlivanoglou ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Performance ◽  
Three Dimensional ◽  
Unsteady Aerodynamics ◽  
Cost Effective ◽  
Navier Stokes ◽  
Line Theory ◽  
Wake Model ◽  
Lifting Line

Due to the rapid progress in high-performance computing and the availability of increasingly large computational resources, Navier-Stokes computational fluid dynamics (CFD) now offers a cost-effective, versatile and accurate means to improve the understanding of the unsteady aerodynamics of Darrieus wind turbines and deliver more efficient designs. In particular, the possibility of determining a fully resolved flow field past the blades by means of CFD offers the opportunity to both further understand the physics underlying the turbine fluid dynamics and to use this knowledge to validate lower-order models, which can have a wider diffusion in the wind energy sector, particularly for industrial use, in the light of their lower computational burden. In this context, highly spatially and temporally refined time-dependent three-dimensional Navier-Stokes simulations were carried out using more than 16,000 processor cores per simulation on an IBM BG/Q cluster in order to investigate thoroughly the three-dimensional unsteady aerodynamics of a single blade in Darrieus-like motion. Particular attention was payed to tip losses, dynamic stall, and blade/wake interaction. CFD results are compared with those obtained with an open-source code based on the Lifting Line Free Vortex Wake Model (LLFVW). At present, this approach is the most refined method among the “lower-fidelity” models and, as the wake is explicitly resolved in contrast to BEM-based methods, LLFVW analyses provide three-dimensional flow solutions. Extended comparisons between the two approaches are presented and a critical analysis is carried out to identify the benefits and drawbacks of the two approaches.

scholarly journals Three-Dimensional Aerodynamic Analysis of a Darrieus Wind Turbine Blade Using Computational Fluid Dynamics and Lifting Line Theory

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Francesco Balduzzi ◽  
David Marten ◽  
Alessandro Bianchini ◽  
Jernej Drofelnik ◽  
Lorenzo Ferrari ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Performance ◽  
Three Dimensional ◽  
Unsteady Aerodynamics ◽  
Cost Effective ◽  
Navier Stokes ◽  
Line Theory ◽  
Wake Model ◽  
Lifting Line

Due to the rapid progress in high-performance computing and the availability of increasingly large computational resources, Navier–Stokes (NS) computational fluid dynamics (CFD) now offers a cost-effective, versatile, and accurate means to improve the understanding of the unsteady aerodynamics of Darrieus wind turbines and deliver more efficient designs. In particular, the possibility of determining a fully resolved flow field past the blades by means of CFD offers the opportunity to both further understand the physics underlying the turbine fluid dynamics and to use this knowledge to validate lower-order models, which can have a wider diffusion in the wind energy sector, particularly for industrial use, in the light of their lower computational burden. In this context, highly spatially and temporally refined time-dependent three-dimensional (3D) NS simulations were carried out using more than 16,000 processor cores per simulation on an IBM BG/Q cluster in order to investigate thoroughly the 3D unsteady aerodynamics of a single blade in Darrieus-like motion. Particular attention was paid to tip losses, dynamic stall, and blade/wake interaction. CFD results are compared with those obtained with an open-source code based on the lifting line free vortex wake model (LLFVW). At present, this approach is the most refined method among the “lower-fidelity” models, and as the wake is explicitly resolved in contrast to blade element momentum (BEM)-based methods, LLFVW analyses provide 3D flow solutions. Extended comparisons between the two approaches are presented and a critical analysis is carried out to identify the benefits and drawbacks of the two approaches.

scholarly journals Experimental Validation Data for Computational Fluid Dynamics of Forced Convection on a Vertical Flat Plate

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Jeff R. Harris ◽  
Blake W. Lance ◽  
Barton L. Smith
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Forced Convection ◽  
Vertical Plate ◽  
Navier Stokes ◽  
Validation Dataset ◽  
System Response ◽  
Cfd Validation ◽  
Validation Data ◽  
Computational Fluid Dynamics Cfd

A computational fluid dynamics (CFD) validation dataset for turbulent forced convection on a vertical plate is presented. The design of the apparatus is based on recent validation literature and provides a means to simultaneously measure boundary conditions (BCs) and system response quantities (SRQs). All important inflow quantities for Reynolds-Averaged Navier-Stokes (RANS). CFD are also measured. Data are acquired at two heating conditions and cover the range 40,000 < Rex < 300,000, 357 <  Reδ2 < 813, and 0.02 < Gr/Re2 < 0.232.

Development of SIMPLE-Like Algorithms for Incompressible Navier-Stokes Equations in Liquid Processing of Materials

2012 ◽  
Vol 184-185 ◽  
pp. 944-948 ◽  
Author(s):  
Hai Jun Gong ◽  
Yang Liu ◽  
Xue Yi Fan ◽  
Da Ming Xu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Stokes Equations ◽  
Simple Algorithm ◽  
Navier Stokes ◽  
Incompressible Fluid Flow ◽  
Numerical Accuracy ◽  
Simple Scheme ◽  
Navier Stokes Equations ◽  
Computational Fluid Dynamics Cfd

For a clear and comprehensive opinion on segregated SIMPLE algorithm in the area of computational fluid dynamics (CFD) during liquid processing of materials, the most significant developments on the SIMPLE algorithm and its variants are briefly reviewed. Subsequently, some important advances during last 30 years serving as increasing numerical accuracy, enhancing robustness and improving efficiency for Navier–Stokes (N-S) equations of incompressible fluid flow are summarized. And then a so-called Direct-SIMPLE scheme proposed by the authors of present paper introduced, which is different from SIMPLE-like schemes, no iterative computations are needed to achieve the final pressure and velocity corrections. Based on the facts cited in present paper, it conclude that the SIMPLE algorithm and its variants will continue to evolve aimed at convergence and accuracy of solution by improving and combining various methods with different grid techniques, and all the algorithms mentioned above will enjoy widespread use in the future.

scholarly journals Airflow inside the nasal cavity: visualization using computational fluid dynamics

2010 ◽  
Vol 4 (4) ◽  
pp. 657-661 ◽  
Author(s):  
Mohammed Zubair ◽  
Vizy Nazira Riazuddin ◽  
Mohammed Zulkifly Abdullah ◽  
Rushdan Ismail ◽  
Ibrahim Lutfi Shuaib ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Nasal Cavity ◽  
Three Dimensional ◽  
Clinical Importance ◽  
Navier Stokes ◽  
Tomographic Images ◽  
Computed Tomographic ◽  
Continuity Equations ◽  
Cfd Method

Abstract Background: It is of clinical importance to examine the nasal cavity pre-operatively on surgical treatments. However, there is no simple and easy way to measure airflow in the nasal cavity. Objectives: Visualize the flow features inside the nasal cavity using computational fluid dynamics (CFD) method, and study the effect of different breathing rates on nasal function. Method: A three-dimensional nasal cavity model was reconstructed based on computed tomographic images of a healthy Malaysian adult nose. Navier-Stokes and continuity equations for steady airflow were solved numerically to examine the inspiratory nasal flow. Results: The flow resistance obtained varied from 0.026 to 0.124 Pa.s/mL at flow-rate from 7.5 L/min to 40 L/min. Flow rates by breathing had significant influence on airflow velocity and wall shear-stress in the vestibule and nasal valve region. Conclusion: Airflow simulations based on CFD is most useful for better understanding of flow phenomenon inside the nasal cavity.

scholarly journals Flow and windage due to bolts on a rotating disc

2016 ◽  
Vol 231 (15) ◽  
pp. 2925-2941
Author(s):  
Sulfickerali Noor Mohamed ◽  
John Chew ◽  
Nick Hills
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Time Dependent ◽  
Navier Stokes ◽  
Rotating Disc ◽  
Rotating Machine ◽  
Flow Features ◽  
Rotor Surface ◽  
Dynamics Simulations ◽  
Cooling Air

The cooling air in a rotating machine is subject to windage as it passes over the rotor surface, particularly for cases where nonaxisymmetric features such as boltheads are encountered. The ability to accurately predict windage can help reduce the quantity of cooling air required, resulting in increased efficiency. Previous work has shown that the steady computational fluid dynamics solutions can give reasonable predictions for the effects of bolts on disc moment for a rotor–stator cavity with throughflow but flow velocities and disc temperature are not well predicted. Large fluctuations in velocities have been observed experimentally in some cases. Time-dependent computational fluid dynamics simulations reported here bring to light the unsteady nature of the flow. Unsteady Reynolds-averaged Navier–Stokes calculations for 120° and 360° models of the rotor–stator cavity with 9 and 18 bolts were performed in order to better understand the flow physics. Although the rotor–stator cavity with bolts is geometrically steady in the rotating frame of reference, it was found that the bolts generate unsteadiness which creates time-dependent rotating flow features within the cavity. At low throughflow conditions, the unsteady flow significantly increases the average disc temperature.

Computational Fluid Dynamics Modeling of Mixed Convection Flows in Building Enclosures

2013 ◽  
Author(s):  
Alexander Kayne ◽  
Ramesh Agarwal
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Mixed Convection ◽  
Turbulence Model ◽  
Numerical Algorithm ◽  
Navier Stokes ◽  
Cfd Simulations ◽  
Flow And Heat Transfer

In recent years Computational Fluid Dynamics (CFD) simulations are increasingly used to model the air circulation and temperature environment inside the rooms of residential and office buildings to gain insight into the relative energy consumptions of various HVAC systems for cooling/heating for climate control and thermal comfort. This requires accurate simulation of turbulent flow and heat transfer for various types of ventilation systems using the Reynolds-Averaged Navier-Stokes (RANS) equations of fluid dynamics. Large Eddy Simulation (LES) or Direct Numerical Simulation (DNS) of Navier-Stokes equations is computationally intensive and expensive for simulations of this kind. As a result, vast majority of CFD simulations employ RANS equations in conjunction with a turbulence model. In order to assess the modeling requirements (mesh, numerical algorithm, turbulence model etc.) for accurate simulations, it is critical to validate the calculations against the experimental data. For this purpose, we use three well known benchmark validation cases, one for natural convection in 2D closed vertical cavity, second for forced convection in a 2D rectangular cavity and the third for mixed convection in a 2D square cavity. The simulations are performed on a number of meshes of different density using a number of turbulence models. It is found that k-epsilon two-equation turbulence model with a second-order algorithm on a reasonable mesh gives the best results. This information is then used to determine the modeling requirements (mesh, numerical algorithm, turbulence model etc.) for flows in 3D enclosures with different ventilation systems. In particular two cases are considered for which the experimental data is available. These cases are (1) air flow and heat transfer in a naturally ventilated room and (2) airflow and temperature distribution in an atrium. Good agreement with the experimental data and computations of other investigators is obtained.

Numerical Prediction of Blended Wing Body Aerodynamic Characteristics at Subsonic Speed

2014 ◽  
Vol 71 (2) ◽  
Author(s):  
Pang Jung Hoe ◽  
Nik Ahmad Ridhwan Nik Mohd
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Performance ◽  
Aerodynamic Characteristic ◽  
Aerodynamic Characteristics ◽  
Numerical Prediction ◽  
Navier Stokes ◽  
Subsonic Speed ◽  
Computational Fluid Dynamics Cfd ◽  
Blended Wing Body

The need for high performance and green aircraft has brought the blended wing (BWB) aircraft concept to the centre of interest for many researchers. BWB is a type of aircraft characterized by a complex blending geometry between fuselage and wing. Recently, many researches had been performed to unlock its aerodynamic complexity that is still not well understood. In this paper, aerodynamic characteristic of a baseline BWB configuration derived from simple conventional aircraft configuration was analysed using the Reynolds-averaged Navier-Stokes computational fluid dynamics (CFD) solver. The main objectives of this work are to predict the aerodynamic characteristics of the BWB concept at steady flight conditions and at various pitch angles. The results obtained are then compared against a simple conventional aircraft configuration (CAC). The results show that the BWB configuration used has 24% higher L/D ratio than the CAC. The increment to the L/D however is mainly due to lower drag than the improvement in the lift. 

Sign in / Sign up

Export Citation Format

Share Document