scholarly journals HUMAN BODY ANTHROPOMORPHIC PHANTOM UTILISATION FOR THE COMPLEX TESTING OF RADIATION THERAPY TECHNOLOGICAL PROCESS

Doklady BGUIR ◽  
2019 ◽  
pp. 133-140
Author(s):  
Y. I. Holdman ◽  
E. V. Titovich
Keyword(s):  
Radiation Therapy ◽  
Technological Process ◽  
Dose Distribution ◽  
Radiation Treatment ◽  
Planning System ◽  
Treatment Planning System ◽  
Therapy Process ◽  
Anthropomorphic Phantom ◽  
Strict Compliance ◽  
End To End

The rapid development of technologies in the field of radiation therapy allows us nowadays to implement precision and most clinically effective radiotherapy techniques for oncological patient’s treatment to minimize the irradiation of normal tissues and improve local tumor control. An important condition for the implementation of the justification principle is strict compliance with the requirements for the accuracy of the dose delivered. High standards of radiation treatments performed are guaranteed by the development and strict compliance with the quality assurance (QA) program in the radiological department. However, due to QA programmes specificity, standardized and worldwide used tests included in the quality management system are trivial mechanical and dosimetric tests that can’t define the presence and magnitude of the integral error in the dose delivered to the patient, which arises as a result of the execution of sophisticated radiation therapy procedures, as well as to take into account the complexity of the implementation of modern methods of treatment. The aim of the work is to develop a method of complex dosimetric testing of the radiation therapy process (end-to-end audit), based on the utilization of the anthropomorphic phantom of the original design. The result of this work is the creation of the modified anthropomorphic phantom for precision dosimetric measurements, designed for testing the following technological procedures of the radiation therapy process: a computer tomography acquisition; a computerized treatment planning system, including a contouring module and dose distribution calculation algorithm; imaging systems integrated with radiation treatment units; dosimetric and technical characteristics of the radiation treatment units. Regular dosimetric testing of the radiation therapy technological process (end-to-end audit) with utilization of the technique proposed by the authors, based on the developed anthropomorphic phantom usage, will allow to assess the accuracy of dose distribution delivered to patients with all major malignant tumors localizations.

scholarly journals Comparison of 3DCRT Dose Distribution in Radiotherapy for Lung Cancer Patient by Using AAA and PBC Algorithms

2016 ◽  
Vol 68 ◽  
pp. 54-60
Author(s):  
Muhammad Masud Rana ◽  
S.M. Azharul Islam ◽  
M. Moinul Islam ◽  
Md. Shakilur Rahman ◽  
Sarwar Alam ◽  
...  
Keyword(s):  
Lung Cancer ◽  
Treatment Planning ◽  
Dose Distribution ◽  
Radiation Treatment ◽  
Planning System ◽  
Radiotherapy Planning ◽  
Treatment Planning System ◽  
Medical Systems ◽  
Calculation Algorithm ◽  
Conformal Radiation Therapy

The Pencil Beam Convolution (PBC) algorithm in radiation treatment planning system is widely used to calculate the radiation dose distribution in radiotherapy planning. A new photon dose calculation algorithm known as Anisotropic Analytical Algorithm (AAA) by Varian Medical Systems is applied to investigate the difference of dose distribution by using AAA and PBC algorithms for the lung cancer with an inhomogeneity of its low density. In the present work, radiotherapy treatment planning of 10 lung cancer patients are designed with 6 MV photon beam using three-dimensional conformal radiation therapy (3DCRT) and dose distribution was calculated by the AAA and the PBC Algorithms. The dose distribution performance is evaluated by dose profile curve along transversal slice of PTV and Dose Volume Histogram (DVH) covered by the 95% isodose of PTV. The mean dose of organ at risks did not changed significantly but the volume of the PTV covered by the 95% isodose curve was decreased by 6% with inhomogeneity due to the algorithms. The dose distribution and the accuracy in calculating the absorbed dose of the AAA algorithm of the Varian Eclipse treatment planning system is analyzed and discussed.

scholarly journals Evaluation and comparison of dose distributions for nasopharyngeal carcinoma patients treated by Jaws-Only IMRT technique and by 3D-CRT technique at Dong Nai General Hospital

2017 ◽  
Vol 1 (T4) ◽  
pp. 79-87
Author(s):  
Tai Thanh Duong ◽  
Son Dong Nguyen ◽  
Loan Thi Hong Truong ◽  
Trang Thi Hong Nguyen
Keyword(s):  
Radiation Therapy ◽  
Nasopharyngeal Carcinoma ◽  
General Hospital ◽  
Radiation Treatment ◽  
Planning System ◽  
Detector Array ◽  
Treatment Planning System ◽  
Dose Distributions ◽  
Array Measurements ◽  
3D Crt

The goal of radiation therapy is twofold: maximize the possibility of destroy malignant cells while minimizing the damage to healthy tissue. The introduction of intensity modulated radiation therapy (IMRT) technique has brought improvements in this goal. Multi-leaf collimator (MLC) is a useful tool for IMRT. However, the use of MLC is not necessarily mandatory. The Panther Treatment Planning System version 4.6, Prowess Inc., enables the implementation of this technique for accelerator without MLC (the socalled Jaws-Only IMRT technique). This study aims to evaluate the results of application of Jaws-only IMRT technique for nasopharyngeal carcinoma patients at Dong Nai general hospital. Twenty five patients were randomly selected for this study. For each patient, two plans were generated: 3D-CRT (Three-Dimensional Radiation Treatment) and JO-IMRT. The dose distributions, dose-volume histograms (DVH), conformity indexes (COIN), homogeneity indexes (HI) were used to compare between these two plans and find out the best plan. Pretreatment verifications were performed for all patients' plans using ion chamber (Farmer Type Chamber FC65-P, IBA), detector array (MapCHECK2, Sun Nuclear Corporation and Octavius 4D 1500, PTW). The average deviation between measurement and calculation for point dose was 2.3±1.1 %, within limit dose constraint. For detector array measurements, the gamma index with 3 % dose difference and 3 mm was higher than 95 %. The results showed that the JO-IMRT technique had generated better dose distribution in the target volume and reduced dose to healthy tissues compared to 3D-CRT.

scholarly journals Does Vertebroplasty Affect Radiation Dose Distribution?: Comparison of Spatial Dose Distributions in a Cement-Injected Vertebra as Calculated by Treatment Planning System and Actual Spatial Dose Distribution

2012 ◽  
Vol 2012 ◽  
pp. 1-6
Author(s):  
Atsushi Komemushi ◽  
Noboru Tanigawa ◽  
Shuji Kariya ◽  
Rie Yagi ◽  
Miyuki Nakatani ◽  
...  
Keyword(s):  
Bone Cement ◽  
Bulk Density ◽  
Treatment Planning ◽  
Dose Distribution ◽  
Radiation Treatment ◽  
Ventral Side ◽  
Planning System ◽  
Treatment Planning System ◽  
Film Dosimetry ◽  
Radiation Treatment Planning System

Purpose. To assess differences in dose distribution of a vertebral body injected with bone cement as calculated by radiation treatment planning system (RTPS) and actual dose distribution.Methods. We prepared two water-equivalent phantoms with cement, and the other two phantoms without cement. The bulk density of the bone cement was imported into RTPS to reduce error from high CT values. A dose distribution map for the phantoms with and without cement was calculated using RTPS with clinical setting and with the bulk density importing. Actual dose distribution was measured by the film density. Dose distribution as calculated by RTPS was compared to the dose distribution measured by the film dosimetry.Results. For the phantom with cement, dose distribution was distorted for the areas corresponding to inside the cement and on the ventral side of the cement. However, dose distribution based on film dosimetry was undistorted behind the cement and dose increases were seen inside cement and around the cement. With the equivalent phantom with bone cement, differences were seen between dose distribution calculated by RTPS and that measured by the film dosimetry.Conclusion. The dose distribution of an area containing bone cement calculated using RTPS differs from actual dose distribution.

scholarly journals Optical fibre based real-time measurements during an LDR prostate brachytherapy implant simulation: using a 3D printed anthropomorphic phantom

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
P. Woulfe ◽  
F. J. Sullivan ◽  
L. Byrne ◽  
A. J. Doyle ◽  
W. Kam ◽  
...  
Keyword(s):  
Optical Fibre ◽  
Planning System ◽  
Treatment Planning System ◽  
Prostate Brachytherapy ◽  
Anthropomorphic Phantom ◽  
Optical Fibre Sensor ◽  
Ldr Brachytherapy ◽  
3D Printed ◽  
Average Activity ◽  
Iodine 125

AbstractAn optical fibre sensor based on radioluminescence, using the scintillation material terbium doped gadolinium oxysulphide (Gd2O2S:Tb) is evaluated, using a 3D printed anthropomorphic phantom for applications in low dose-rate (LDR) prostate brachytherapy. The scintillation material is embedded in a 700 µm diameter cavity within a 1 mm plastic optical fibre that is fixed within a brachytherapy needle. The high spatial resolution dosimeter is used to measure the dose contribution from Iodine-125 (I-125) seeds. Initially, the effects of sterilisation on the sensors (1) repeatability, (2) response as a function of angle, and (3) response as a function of distance, are evaluated in a custom polymethyl methacrylate phantom. Results obtained in this study demonstrate that the output response of the sensor, pre- and post-sterilisation are within the acceptable measurement uncertainty ranging from a maximum standard deviation of 4.7% pre and 5.5% post respectively, indicating that the low temperature sterilisation process does not damage the sensor or reduce performance. Subsequently, an LDR brachytherapy plan reconstructed using the VariSeed treatment planning system, in an anthropomorphic 3D printed training phantom, was used to assess the suitability of the sensor for applications in LDR brachytherapy. This phantom was printed based on patient anatomy, with the volume and dimensions of the prostate designed to represent that of the patient. I-125 brachytherapy seeds, with an average activity of 0.410 mCi, were implanted into the prostate phantom under trans-rectal ultrasound guidance; following the same techniques as employed in clinical practice by an experienced radiation oncologist. This work has demonstrated that this sensor is capable of accurately identifying when radioactive I-125 sources are introduced into the prostate via a brachytherapy needle.

scholarly journals Quality Assurance of Dose Distribution of Photon Beam Planning by Anisotropic Analytical Algorithm (AAA)

2013 ◽  
Vol 4 (1) ◽  
pp. 43-49
Author(s):  
M Jahangir Alam ◽  
Syed Md Akram Hussain ◽  
Kamila Afroj ◽  
Shyam Kishore Shrivastava
Keyword(s):  
Quality Assurance ◽  
Treatment Planning ◽  
Dose Distribution ◽  
Maximum Dose ◽  
Photon Beam ◽  
Field Size ◽  
Planning System ◽  
Treatment Planning System ◽  
Anisotropic Analytical Algorithm ◽  
Analytical Algorithm

A three dimensional treatment planning system has been installed in the Oncology Center, Bangladesh. This system is based on the Anisotropic Analytical Algorithm (AAA). The aim of this study is to verify the validity of photon dose distribution which is calculated by this treatment planning system by comparing it with measured photon beam data in real water phantom. To do this verification, a quality assurance program, consisting of six tests, was performed. In this program, both the calculated output factors and dose at different conditions were compared with the measurement. As a result of that comparison, we found that the calculated output factor was in excellent agreement with the measured factors. Doses at depths beyond the depth of maximum dose calculated on-axis or off-axis in both the fields or penumbra region were found in good agreement with the measured dose under all conditions of energy, SSD and field size, for open and wedged fields. In the build up region, calculated and measured doses only agree (with a difference 2.0%) for field sizes > 5 × 5 cm2 up to 25 × 25 cm2. For smaller fields, the difference was higher than 2.0% because of the difficulty in dosimetry in that region. Dose calculation using treatment planning system based on the Anisotropic Analytical Algorithm (AAA) is accurate enough for clinical use except when calculating dose at depths above maximum dose for small field size.DOI: http://dx.doi.org/10.3329/bjmp.v4i1.14686 Bangladesh Journal of Medical Physics Vol.4 No.1 2011 43-49

scholarly journals An Integrated Framework Based on Full Monte Carlo Simulations for Double-Scattering Proton Therapy

2019 ◽  
Vol 6 (2) ◽  
pp. 31-41
Author(s):  
Jiankui Yuan ◽  
David Mansur ◽  
Min Yao ◽  
Tithi Biswas ◽  
Yiran Zheng ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Proton Therapy ◽  
Treatment Plan ◽  
Planning System ◽  
Treatment Planning System ◽  
Patient Specific ◽  
Double Scattering ◽  
Integrated Framework ◽  
End To End ◽  
Clinical Cases

ABSTRACT Purpose: We developed an integrated framework that employs a full Monte Carlo (MC) model for treatment-plan simulations of a passive double-scattering proton system. Materials and Methods: We have previously validated a virtual machine source model for full MC proton-dose calculations by comparing the percentage of depth-dose curves, spread-out Bragg peaks, and lateral profiles against measured commissioning data. This study further expanded our previous work by developing an integrate framework that facilitates its clinical use. Specifically, we have (1) constructed patient-specific applicator and compensator numerically from the plan data and incorporated them into the beamline, (2) created the patient anatomy from the computed tomography image and established the transformation between patient and machine coordinate systems, and (3) developed a graphical user interface to ease the whole process from importing the treatment plan in the Digital Imaging and Communications in Medicine format to parallelization of the MC calculations. End-to-end tests were performed to validate the functionality, and 3 clinical cases were used to demonstrate clinical utility of the framework. Results: The end-to-end tests demonstrated that the framework functioned correctly for all tested functionality. Comparisons between the treatment planning system calculations and MC results in 3 clinical cases revealed large dose difference up to 17%, especially in the beam penumbra and near the end of beam range. The discrepancy likely originates from a variety of sources, such as the dose algorithms, modeling of the beamline, and the dose metric. The agreement for other regions was acceptable. Conclusion: An integrated framework was developed for full MC simulations of double-scattering proton therapy. It can be a valuable tool for dose verification and plan evaluation.

scholarly journals Dosimetric Studies of Mixed Energy Intensity Modulated Radiation Therapy for Prostate Cancer Treatments

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
K. Abdul Haneefa ◽  
K. K. Shakir ◽  
A. Siddhartha ◽  
T. Siji Cyriac ◽  
M. M. Musthafa ◽  
...  
Keyword(s):  
Prostate Cancer ◽  
Radiation Therapy ◽  
Intensity Modulated Radiation Therapy ◽  
High Energy ◽  
Photon Beam ◽  
Planning System ◽  
Treatment Planning System ◽  
Intensity Modulated ◽  
Mixed Beam ◽  
Mixed Field

Dosimetric studies of mixed field photon beam intensity modulated radiation therapy (IMRT) for prostate cancer using pencil beam (PB) and collapsed cone convolution (CCC) algorithms using Oncentra MasterPlan treatment planning system (v. 4.3) are investigated in this study. Three different plans were generated using 6 MV, 15 MV, and mixed beam (both 6 and 15 MV). Fifteen patients with two sets of plans were generated: one by using PB and the other by using CCC for the same planning parameters and constraints except the beam energy. For each patient’s plan of high energy photons, one set of photoneutron measurements using solid state neutron track detector (SSNTD) was taken for this study. Mean percentage of V66 Gy in the rectum is 18.55±2.8, 14.58±2.1, and 16.77±4.7 for 6 MV, 15 MV, and mixed-energy plans, respectively. Mean percentage of V66 Gy in bladder is 16.54±2.1, 17.42±2.1, and 16.94±41.9 for 6 MV, 15 MV, and mixed-energy plans, respectively. Mixed fields neutron contribution at the beam entrance surface is 45.62% less than at 15 MV photon beam. Our result shows that, with negligible neutron contributions, mixed field IMRT has considerable dosimetric advantage.

Sign in / Sign up

Export Citation Format

Share Document