scholarly journals Optimal Capacitor Placement in Radial Distribution System Using Moth Flame Optimization Algorithm

2019 ◽  
Vol 54 (3) ◽  
Author(s):  
Ihsan Salman ◽  
Khalid Mohammed ◽  
Khalid Shaker ◽  
Hothefa Shaker
Keyword(s):  
Radial Distribution ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Imperialist Competitive Algorithm ◽  
Distribution Networks ◽  
Total Power ◽  
Voltage Profile ◽  
Capacitor Placement ◽  
Matlab Programming

The environment friendly designing and running of electricity distribution structures are becoming vaster with the conjunction of renewable electricity options into power distribution systems. This study presents Moth Flame Optimization (MFO) approach to minimize total losses kW and energy cost and maximize net savings with solving the voltage deviation problem through optimal site and size of capacitor banks in electrical radial distribution networks. Two various load profiles are utilized to take a look at the modified algorithm on IEEE 123-, and 13-bus check networks. The OpenDSS software is utilized to resolve the power flowing via MATLAB programming interface. The results obtained are compared with IEEE normal state and other two heuristic approaches in same study, namely, imperialist competitive algorithm and particle swarm optimization. The proposed algorithm is more effective to minimise the total power losses and total cost and maximise net savings and to enhance the voltage profile for various distribution systems.

scholarly journals A hybrid algorithm for voltage stability enhancement of distribution systems

2022 ◽  
Vol 12 (1) ◽  
pp. 50
Author(s):  
Hazim Sadeq Mohsin Al-Wazni ◽  
Shatha Suhbat Abdulla Al-Kubragyi
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Hybrid Algorithm ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Distribution Networks ◽  
Optimal Operation ◽  
Total Power ◽  
Optimal Size ◽  
Voltage Profile

This paper presents a hybrid algorithm by applying a hybrid firefly and particle swarm optimization algorithm (HFPSO) to determine the optimal sizing of distributed generation (DG) and distribution static compensator (D-STATCOM) device. A multi-objective function is employed to enhance the voltage stability, voltage profile, and minimize the total power loss of the radial distribution system (RDS). Firstly, the voltage stability index (VSI) is applied to locate the optimal location of DG and D-STATCOM respectively. Secondly, to overcome the sup-optimal operation of existing algorithms, the HFPSO algorithm is utilized to determine the optimal size of both DG and D-STATCOM. Verification of the proposed algorithm has achieved on the standard IEEE 33-bus and Iraqi 65-bus radial distribution systems through simulation using MATLAB. Comprehensive simulation results of four different cases show that the proposed HFPSO demonstrates significant improvements over other existing algorithms in supporting voltage stability and loss reduction in distribution networks. Furthermore, comparisons have achieved to demonstrate the superiority of HFPSO algorithms over other techniques due to its ability to determine the global optimum solution by easy way and speed converge feature.

scholarly journals Multiple DGs for Reducing Total Power Losses in Radial Distribution Systems Using Hybrid WOA-SSA Algorithm

2019 ◽  
Vol 2019 ◽  
pp. 1-20 ◽  
Author(s):  
Khalid Mohammed Saffer Alzaidi ◽  
Oguz Bayat ◽  
Osman N. Uçan
Keyword(s):  
Radial Distribution ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Load Flow ◽  
Optimal Placement ◽  
Total Power ◽  
Voltage Profile ◽  
Power Losses ◽  
Standard Case ◽  
Whale Optimization

Distributed generators (DGs) are currently extensively used to reduce power losses and voltage deviations in distribution networks. The optimal location and size of DGs achieve the best results. This study presents a novel hybridization of new metaheuristic optimizations in the last two years, namely, salp swarm algorithm (SSA) and whale optimization algorithm (WOA), for optimal placement and size of multi-DG units in radial distribution systems to minimize total real power losses (kW) and solve voltage deviation. This hybrid algorithm is implemented on IEEE 13- and 123-node radial distribution test systems. The OpenDSS engine is used to solve the power flow to find the power system parameters, such power losses, and the voltage profile through the MATLAB coding interface. Results describe the effectiveness of the proposed hybrid WOA-SSA algorithm compared with those of the IEEE standard case (without DG), repeated load flow method, and WOA and SSA algorithms applied independently. The analysis results via the proposed algorithm are more effective for reducing total active power losses and enhancing the voltage profile for various distribution networks and multi-DG units.

scholarly journals Optimal location and capacity of multi-distributed generation for loss reduction and voltage profile improvement using imperialist competitive algorithm

2012 ◽  
Vol 1 (2) ◽  
pp. 56 ◽  
Author(s):  
M. Rostamzadeh ◽  
K. Valipour ◽  
S. J. Shenava ◽  
M. Khalilpour ◽  
N. Razmjooy
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Reactive Power ◽  
Imperialist Competitive Algorithm ◽  
Total Power ◽  
Voltage Profile ◽  
Power Losses ◽  
Radial Distribution System ◽  
Real Power ◽  
Competitive Algorithm

This paper proposes an Imperialist Competitive Algorithm (ICA) for optimal multiple distributed generations (DGs) placement and sizing in a distribution system. The objective is to minimize the total real power losses and improve the voltage profile within real and reactive power generation and voltage limits. Three types of DG are considered and the ICA is used to find the better sizes and locations of DGs for maximum real power losses reduction and voltage improvement for given number of DG units in each type. Both integer and continuous variables are considered in ICA, integer variable for locations and continues variable for sizes. The total real power losses and voltage profile evaluation are based on a power flow method for radial distribution system with the representation of DGs. The proposed method has been demonstrated on 33 bus radial distribution system. The efficiency of the ICA in reducing the total power losses and improving voltage is validated by comparing the obtained results with Particle Swarm Optimization (PSO) algorithm.

scholarly journals Combination of Optimal Conductor Selection and Capacitor Placement in Radial Distribution Systems Using PSO Method

2014 ◽  
Vol 10 (1) ◽  
pp. 33-41
Author(s):  
Mahdi Legha ◽  
Farzaneh Ostovar ◽  
Mohammad Legha
Keyword(s):  
Radial Distribution ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Voltage Profile ◽  
Capacitor Banks ◽  
Capacitor Placement ◽  
Kerman City ◽  
Voltage Limit ◽  
The Cost

In This paper presents an approach for optimal placement and sizing of fixed capacitor banks and also optimal conductor selection in radial distribution networks for the purpose of economic minimization of loss and enhancement of voltage. The objective function includes the cost of power losses, voltage profile, fixed capacitor banks and also type of conductor selection. Constraints include voltage limit, maximum permissible carrying current of conductors, size of available capacitors and type of conductors. The optimization problem is solved by the Imperialism Competitive algorithm method and the size and site capacitor banks and type of conductors is determined. To demonstrate the validity of the proposed algorithm, computer simulations are carried out on actual power network of Kerman city, Iran and the simulation results are presented and discussed.

Multi-objective optimization of optimal capacitor allocation in radial distribution systems

2020 ◽  
Vol 21 (3) ◽  
Author(s):  
Sayed Mir Shah Danish ◽  
Mikaeel Ahmadi ◽  
Atsushi Yona ◽  
Tomonobu Senjyu ◽  
Narayanan Krishna ◽  
...  
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Reactive Power ◽  
Stability Index ◽  
Distribution Networks ◽  
Optimization Method ◽  
Optimal Size ◽  
Multi Objective Optimization ◽  
Multi Objective

AbstractThe optimal size and location of the compensator in the distribution system play a significant role in minimizing the energy loss and the cost of reactive power compensation. This article introduces an efficient heuristic-based approach to assign static shunt capacitors along radial distribution networks using multi-objective optimization method. A new objective function different from literature is adapted to enhance the overall system voltage stability index, minimize power loss, and to achieve maximum net yearly savings. However, the capacitor sizes are assumed as discrete known variables, which are to be placed on the buses such that it reduces the losses of the distribution system to a minimum. Load sensitive factor (LSF) has been used to predict the most effective buses as the best place for installing compensator devices. IEEE 34-bus and 118-bus test distribution systems are utilized to validate and demonstrate the applicability of the proposed method. The simulation results obtained are compared with previous methods reported in the literature and found to be encouraging.

scholarly journals Optimal Allocation of Capacitor Bank for Loss Minimization and Voltage Improvement Using Analytical Method

SCITECH Nepal ◽  
2019 ◽  
Vol 14 (1) ◽  
pp. 1-7
Author(s):  
Avinash Khatri KC ◽  
Tika Ram Regmi
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Optimal Allocation ◽  
Reactive Power ◽  
Capacitor Bank ◽  
Minimum Cost ◽  
Distribution Networks ◽  
Standard Test ◽  
Load Flow ◽  
Voltage Profile

An electric distribution system plays an important role in achieving satisfactory power supply. The quality of power is measured by voltage stability and profile of voltage. The voltage profile is affected by the losses in distribution system. As the load is mostly inductive on the distribution system and requires large reactive power, most of the power quality problems can be resolved with requisite control of reactive power. Capacitors are often installed in distribution system for reactive power compensation. This paper presents two stage procedures to identify the location and size of capacitor bank. In the first stage, the load flow is carried out to find the losses of the system using sweep algorithm. In the next stage, different size of capacitors are initialized and placed in each possible candidate bus and again load flow for the system is carried out. The objective function of the cost incorporating capacitor cost and loss cost is formulated constrained with voltage limits. The capacitor with the minimum cost is selected as the optimized solution. The proposed procedure is applied to different standard test systems as 12-bus radial distribution systems. In addition, the proposed procedure is applied on a real distribution system, a section of Sallaghari Feeder of Thimi substation. The voltage drops and power loss before and after installing the capacitor were compared for the system under test in this work. The result showed better voltage profiles and power losses of the distribution system can be improved by using the proposed method and it can be a benefit to the distribution networks.

Optimal Capacitors in Radial Distribution System for Loss Reduction and Voltage Enhancement

2016 ◽  
Vol 2 (3) ◽  
pp. 566 ◽  
Author(s):  
S. Bhongade ◽  
Sachin Arya
Keyword(s):  
Radial Distribution ◽  
Distribution System ◽  
Power Loss ◽  
Distribution Systems ◽  
Pso Algorithm ◽  
Load Flow ◽  
Base Case ◽  
Voltage Profile ◽  
Radial Distribution System ◽  
Case Load

The work presented in this paper is carried out with the objective of identifying the optimal location and size (Kvar ratings) of shunt capacitors to be placed in radial distribution system, to have overall economy considering the saving due to energy loss minimization. To achieve this objective, a two stage methodology is adopted in this paper. In the first stage, the base case load flow of uncompensated distribution system is carried out. On the basis of base case load flow solution, Nominal voltage magnitudes and Loss Sensitivity Factors are calculated and the weak buses are selected for capacitor placement.In the second stage, Particle Swarm Optimization (PSO) algorithm is used to identify the size of the capacitors to be placed at the selected buses for minimizing the power loss. The developed algorithm is tested for 10-bus, 34-bus and 85-bus Radial Distribution Systems. The results show that there has been an enhancement in voltage profile and reduction in power loss thus resulting in much annual saving.

scholarly journals Efficiency Comparison of AC and DC Distribution Networks for Modern Residential Localities

2019 ◽  
Vol 9 (3) ◽  
pp. 582 ◽  
Author(s):  
Hasan Gelani ◽  
Faizan Dastgeer ◽  
Kiran Siraj ◽  
Mashood Nasir ◽  
Kamran Niazi ◽  
...  
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
System Modeling ◽  
Distribution Networks ◽  
Solar Irradiation ◽  
Energy Information Administration ◽  
Solar Pv ◽  
Dc Distribution ◽  
Efficiency Comparison

The paper investigates the system efficiency for power distribution in residential localities considering daily load variations. Relevant system modeling is presented. A mathematical model is devised, which is based on the data from the Energy Information Administration (EIA), USA, for analysis. The results reveal that the DC distribution system can present an equivalent or even better efficiency compared to the AC distribution network with an efficiency advantage of 2.3%, averaged over a day. Furthermore, the distribution systems are compared under various capacities of solar PV accounting for the effect of variation in solar irradiation over time.

Planning of Distribution System with High Penetration Level for Distributed Generation in Smart Grid

2018 ◽  
Vol 8 (3) ◽  
Author(s):  
Reza Tajik
Keyword(s):  
Smart Grid ◽  
Power Systems ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Planning Problem ◽  
Renewable Energy Resources ◽  
Power Distribution System ◽  
High Penetration

Nowadays, the utilization of renewable energy resources in distribution systems (DSs) has been rapidly increased. Since distribution generation (DG) use renewable resources (i.e., biomass, wind and solar) are emerging as proper solutions for electricity generation. Regarding the tremendous deployment of DG, common distribution networks are undergoing a transition to DSs, and the common planning methods have become traditional in the high penetration level. Indeed, in conformity with the voltage violation challenge of these resources, this problem must be dealt with too. So, due to the high penetration of DG resources and nonlinear nature of most industrial loads, the planning of DG installation has become an important issue in power systems. The goal of this paper is to determine the planning of DG in distribution systems through smart grid to minimize losses and control grid factors. In this regard, the present work intending to propose a suitable method for the planning of DSs, the key properties of DS planning problem are evaluated from the various aspects, such as the allocation of DGs, and planning, and high-level uncertainties. Also depending on these analyses, this universal literature review addressed the updated study associated with DS planning. In this work, an operational design has been prepared for a higher performance of the power distribution system in the presence of DG. Artificial neural network (ANN) has been used as a method for voltage monitoring and generation output optimization. The findings of the study show that the proposed method can be utilized as a technique to improve the process of the distribution system under various penetration levels and in the presence of DG. Also, the findings revealed that the optimal use of ANN method leads to more controllable and apparent DS.

ON OPTIMAL DESIGN AND EXPANSION OF ELECTRICAL POWER DISTRIBUTION SYSTEMS

2010 ◽  
Vol 19 (01) ◽  
pp. 45-58 ◽  
Author(s):  
SAJAD NAJAFI RAVADANEGH ◽  
ARASH VAHIDNIA ◽  
HOJAT HATAMI
Keyword(s):  
Optimal Design ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Large Scale ◽  
Minimum Spanning Tree ◽  
Optimization Problems ◽  
Distribution Networks ◽  
Coding Method ◽  
Real Size

Optimal planning of large-scale distribution networks is a multiobjective combinatorial optimization problem with many complexities. This paper proposes the application of improved genetic algorithm (GA) for the optimal design of large-scale distribution systems in order to provide optimal sizing and locating of the high voltage (HV) substations and medium voltage (MV) feeders routing, using their corresponding fixed and variable costs associated with operational and optimization constraints. The novel approach presented in the paper, solves hard satisfactory optimization problems with different constraints in large-scale distribution networks. This paper presents a new concept based on MST in graph theory and GA for optimal locating of the HV substations and MV feeders routing in a real-size distribution network. Minimum spanning tree solved with Prim's algorithm is employed to generate a set of feasible population. In the present article, to reduce computational burden and avoid huge search space leading to infeasible solutions, special coding method is generated for GA operators to solve optimal feeders routing. The proposed coding method guarantees the validity of the solution during the progress of the GA toward the global optimal solution. The developed GA-based software is tested in a real-size large-scale distribution system and the well-satisfactory results are presented.

Sign in / Sign up

Export Citation Format

Share Document