scholarly journals Use of Flat Ribbon like Electrode Geometry to Pole PVDF Piezoelectrics in Solution Processing

2019 ◽  
Vol 9 (1S3) ◽  
pp. 27-31
Keyword(s):  
Energy Harvesting ◽  
Resonant Frequency ◽  
Electric Fields ◽  
Low Frequency ◽  
Solution Processing ◽  
Electrode Geometry ◽  
Large Area ◽  
Parallel Plate Capacitor ◽  
Low Frequency Vibration ◽  
Corona Poling

We study how ribbons of fluids subjected to electric fields can serve applications in energy harvesting. In particular the emphasis is on how the geometry (i.e. 2-D ribbons) can influence functionality. For applications related to energy harvesting, we consider the use of polymer Piezo-electric PolyvinylideneFluoride (PVDF). Corona poling, photo-induced, photo-thermal and electron beam poling are the different conventional techniques used for PVDF poling. The parallel plate capacitor structure made for poling the PVDF material while the PVDF is being cured. One key advantage of preparing PVDF is the ability of solution processing. Normally, the liquid is then spin coated on a substrate and left to dry. Either during the process of spin coating, or after drying - the film of PVDF is poled so as to align the dipoles and make a piezoelectric. We propose the use of a metal-insulator ribbon like electrode geometry to combine the process of fabrication and poling thereby making the process more efficient. On the application of a voltage across the electrodes, the voltage of Vs is developed across the fluid. This result in a field of Vs/d across the PVDF fills aiding the process of poling while the film is in liquid phase. Therefore the ribbon like geometry aids the use of PVDF piezo-electrics in two ways. Firstly, it makes the fabrication process efficient by combining the poling with the structure development. Secondly, the control of width (w) and length (l) aids the setup of the PVDF piezoelectric resonant frequency for a given thickness (d). This helps match the resonant frequency of the ribbon with the incoming low frequency vibration to improve the energy harvesting levels. Piezo-electrics can be used in submerged applications, large area PVDF energy scavengers, mechanical filters and sensors, rural electrification, and charging circuits for hand-held devices.

Development of a tunable low-frequency vibration energy harvester and its application to a self-contained wireless fatigue crack detection sensor

2018 ◽  
Vol 18 (3) ◽  
pp. 920-933 ◽  
Author(s):  
Suyoung Yang ◽  
Sung-Youb Jung ◽  
Kiyoung Kim ◽  
Peipei Liu ◽  
Sangmin Lee ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Energy Harvesting ◽  
Crack Detection ◽  
Energy Harvester ◽  
Low Frequency ◽  
Vibration Energy ◽  
Low Frequency Vibration ◽  
Resonance Frequencies ◽  
Energy Harvesting System ◽  
Fatigue Crack Detection

In this study, a tunable electromagnetic energy harvesting system, consisting of an energy harvester and energy harvesting circuits, is developed for harnessing energy from low-frequency vibration (below 10 Hz) of a bridge, and the harvesting system is integrated with a wireless fatigue crack detection sensor. The uniqueness of the proposed energy harvesting system includes that (1) the resonance frequencies of the proposed energy harvester can be readily tuned to the resonance frequencies of a host structure, (2) an improved energy harvesting efficiency compared to other electromagnetic energy harvesters is achieved in low-frequency and vibration, and (3) high-efficiency energy harvesting circuits for rectification are developed. Furthermore, the developed energy harvesting system is integrated with an on-site wireless sensor deployed on Yeongjong Grand Bridge in South Korea for online fatigue crack detection. To the best knowledge of the authors, this is the very first study where a series of low-frequency vibration energy harvesting, rectification, and battery charging processes are demonstrated under a real field condition. The field test conducted on Yeongjong Grand Bridge, where fatigue cracks have become of a great concern, shows that the proposed energy harvester can generate a peak voltage of 2.27 V and a root mean square voltage of 0.21 V from 0.18-m/s2 root mean square acceleration at 3.05 Hz. It is estimated the proposed energy harvesting system can harness around 67.90 J for 3 weeks and an average power of 37.42 µW. The battery life of the wireless sensor is expected to extend from 1.5 to 2.2 years. The proposed energy harvesting circuits, composed of the AC–DC and boost-up converters, exhibit up to 50% battery charging efficiency when the voltage generated by the proposed energy harvester is 200 mV or higher. The proposed boost-up converter has a 100 times wider input power range than a conventional boost-up converter with a similar efficiency.

A piezoelectric spring pendulum oscillator used for multi-directional and ultra-low frequency vibration energy harvesting

2018 ◽  
Vol 231 ◽  
pp. 600-614 ◽  
Author(s):  
Yipeng Wu ◽  
Jinhao Qiu ◽  
Shengpeng Zhou ◽  
Hongli Ji ◽  
Yang Chen ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Low Frequency Vibration

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

2006 ◽  
Vol 23 (3) ◽  
pp. 732-734 ◽  
Author(s):  
Fang Hua-Bin ◽  
Liu Jing-Quan ◽  
Xu Zheng-Yi ◽  
Dong Lu ◽  
Chen Di ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Power Generator ◽  
Low Frequency Vibration

Hybrid nanogenerators for low frequency vibration energy harvesting and self-powered wireless locating

2018 ◽  
Vol 5 (1) ◽  
pp. 015510 ◽  
Author(s):  
Ying Yuan ◽  
Hulin Zhang ◽  
Jie Wang ◽  
Yuhang Xie ◽  
Saeed Ahmed Khan ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Low Frequency Vibration ◽  
Self Powered

scholarly journals Correction to: Study of Energy Harvesting from Low-Frequency Vibration with Ferromagnetic Powder and Non-magnetic Fluid

Plasmonics ◽  
2019 ◽  
Vol 15 (3) ◽  
pp. 905-905
Author(s):  
Haruhiko Shirai ◽  
Hiromichi Mitamura ◽  
Nobuaki Arai ◽  
Kazuyuki Moriya
Keyword(s):  
Energy Harvesting ◽  
Magnetic Fluid ◽  
Low Frequency ◽  
Ferromagnetic Powder ◽  
Low Frequency Vibration

Ultra-Long Barium Titanate Nanowire Arrays for Low Frequency Energy Harvesting Applications

2014 ◽  
Author(s):  
Aneesh Koka ◽  
Henry A. Sodano
Keyword(s):  
Barium Titanate ◽  
Energy Harvesting ◽  
Resonant Frequency ◽  
Vibrational Energy ◽  
Low Frequency ◽  
Piezoelectric Response ◽  
Synthesis Process ◽  
Mechanical Vibrations ◽  
Energy Harvesters ◽  
Vertically Aligned

Piezoelectric nanowires (NWs) have recently attracted immense interest due to their excellent electro-mechanical coupling behavior that can efficiently enable conversion of low-intensity mechanical vibrations for powering or augmenting batteries of biomedical devices and portable consumer electronics. Specifically, nano-electromechanical systems (NEMS) composed of piezoelectric NWs offer an exciting potential for energy harvesting applications due to their enhanced flexibility, light weight, and compact size. Compared to the bulk form, high aspect ratio NWs can exhibit higher deformation to produce an enhanced piezoelectric response at a lower stress level. NEMS made of conventional semiconducting vertically aligned, ZnO NW arrays have been investigated thoroughly for energy harvesting; however, ZnO has a lower piezoelectric coupling coefficient as compared to many ferroelectric ceramics which limits its piezoelectric performance. Amidst lead-free ferroelectric materials, environmentally-friendly barium titanate (BaTiO3) possesses one of the highest piezoelectric strain coefficients and thus can enable greater energy transfer when used in vibrational energy harvesters. In this paper, a novel NEMS energy harvester is fabricated using ultra-long (∼40 μm long), vertically aligned BaTiO3 NW arrays which has a low resonant frequency (below 200 Hz) and its AC power harvesting capacity from low amplitude base vibrations (0.25 g) is demonstrated. The design and fabrication of low resonant frequency vibrational energy harvesters has been challenging in the field of MEMS/NEMS since the high stiffness of the structures results in resonant frequency often greater than 1 kHz. However, ambient mechanical vibrations usually exist in the 1 Hz to 1 kHz range and thus highly complaint ultra-long, NW arrays are beneficial to enable efficient energy conversion. Through the use of this newly developed synthesis process for the growth of highly compliant, ultra-long BaTiO3 NW arrays, it is shown that piezoelectric NWs based NEMS energy harvesters capable of harnessing this low frequency ambient vibrational energy can be conceived.

scholarly journals Improving functionality of vibration energy harvesters using magnets

2012 ◽  
Vol 23 (13) ◽  
pp. 1433-1449 ◽  
Author(s):  
Lihua Tang ◽  
Yaowen Yang ◽  
Chee-Kiong Soh
Keyword(s):  
Experimental Study ◽  
Energy Harvesting ◽  
Transition Region ◽  
Parametric Study ◽  
Low Frequency ◽  
Design Guidelines ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Low Frequency Vibration

In recent years, several strategies have been proposed to improve the functionality of energy harvesters under broadband vibrations, but they only improve the efficiency of energy harvesting under limited conditions. In this work, a comprehensive experimental study is conducted to investigate the use of magnets for improving the functionality of energy harvesters under various vibration scenarios. First, the nonlinearities introduced by magnets are exploited to improve the performance of vibration energy harvesting. Both monostable and bistable configurations are investigated under sinusoidal and random vibrations with various excitation levels. The optimal nonlinear configuration (in terms of distance between magnets) is determined to be near the monostable-to-bistable transition region. Results show that both monostable and bistable nonlinear configurations can significantly outperform the linear harvester near this transition region. Second, for ultra-low-frequency vibration scenarios such as wave heave motions, a frequency up-conversion mechanism using magnets is proposed. By parametric study, the repulsive configuration of magnets is found preferable in the frequency up-conversion technique, which is efficient and insensitive to various wave conditions when the magnets are placed sufficiently close. These findings could serve as useful design guidelines when nonlinearity or frequency up-conversion techniques are employed to improve the functionality of vibration energy harvesters.

Sign in / Sign up

Export Citation Format

Share Document