scholarly journals Correction to: Study of Energy Harvesting from Low-Frequency Vibration with Ferromagnetic Powder and Non-magnetic Fluid

Plasmonics ◽  
2019 ◽  
Vol 15 (3) ◽  
pp. 905-905
Author(s):  
Haruhiko Shirai ◽  
Hiromichi Mitamura ◽  
Nobuaki Arai ◽  
Kazuyuki Moriya
Keyword(s):  
Energy Harvesting ◽  
Magnetic Fluid ◽  
Low Frequency ◽  
Ferromagnetic Powder ◽  
Low Frequency Vibration

Development of a tunable low-frequency vibration energy harvester and its application to a self-contained wireless fatigue crack detection sensor

2018 ◽  
Vol 18 (3) ◽  
pp. 920-933 ◽  
Author(s):  
Suyoung Yang ◽  
Sung-Youb Jung ◽  
Kiyoung Kim ◽  
Peipei Liu ◽  
Sangmin Lee ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Energy Harvesting ◽  
Crack Detection ◽  
Energy Harvester ◽  
Low Frequency ◽  
Vibration Energy ◽  
Low Frequency Vibration ◽  
Resonance Frequencies ◽  
Energy Harvesting System ◽  
Fatigue Crack Detection

In this study, a tunable electromagnetic energy harvesting system, consisting of an energy harvester and energy harvesting circuits, is developed for harnessing energy from low-frequency vibration (below 10 Hz) of a bridge, and the harvesting system is integrated with a wireless fatigue crack detection sensor. The uniqueness of the proposed energy harvesting system includes that (1) the resonance frequencies of the proposed energy harvester can be readily tuned to the resonance frequencies of a host structure, (2) an improved energy harvesting efficiency compared to other electromagnetic energy harvesters is achieved in low-frequency and vibration, and (3) high-efficiency energy harvesting circuits for rectification are developed. Furthermore, the developed energy harvesting system is integrated with an on-site wireless sensor deployed on Yeongjong Grand Bridge in South Korea for online fatigue crack detection. To the best knowledge of the authors, this is the very first study where a series of low-frequency vibration energy harvesting, rectification, and battery charging processes are demonstrated under a real field condition. The field test conducted on Yeongjong Grand Bridge, where fatigue cracks have become of a great concern, shows that the proposed energy harvester can generate a peak voltage of 2.27 V and a root mean square voltage of 0.21 V from 0.18-m/s2 root mean square acceleration at 3.05 Hz. It is estimated the proposed energy harvesting system can harness around 67.90 J for 3 weeks and an average power of 37.42 µW. The battery life of the wireless sensor is expected to extend from 1.5 to 2.2 years. The proposed energy harvesting circuits, composed of the AC–DC and boost-up converters, exhibit up to 50% battery charging efficiency when the voltage generated by the proposed energy harvester is 200 mV or higher. The proposed boost-up converter has a 100 times wider input power range than a conventional boost-up converter with a similar efficiency.

A piezoelectric spring pendulum oscillator used for multi-directional and ultra-low frequency vibration energy harvesting

2018 ◽  
Vol 231 ◽  
pp. 600-614 ◽  
Author(s):  
Yipeng Wu ◽  
Jinhao Qiu ◽  
Shengpeng Zhou ◽  
Hongli Ji ◽  
Yang Chen ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Low Frequency Vibration

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

2006 ◽  
Vol 23 (3) ◽  
pp. 732-734 ◽  
Author(s):  
Fang Hua-Bin ◽  
Liu Jing-Quan ◽  
Xu Zheng-Yi ◽  
Dong Lu ◽  
Chen Di ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Power Generator ◽  
Low Frequency Vibration

Hybrid nanogenerators for low frequency vibration energy harvesting and self-powered wireless locating

2018 ◽  
Vol 5 (1) ◽  
pp. 015510 ◽  
Author(s):  
Ying Yuan ◽  
Hulin Zhang ◽  
Jie Wang ◽  
Yuhang Xie ◽  
Saeed Ahmed Khan ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Low Frequency ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Low Frequency Vibration ◽  
Self Powered

scholarly journals Use of Flat Ribbon like Electrode Geometry to Pole PVDF Piezoelectrics in Solution Processing

2019 ◽  
Vol 9 (1S3) ◽  
pp. 27-31
Keyword(s):  
Energy Harvesting ◽  
Resonant Frequency ◽  
Electric Fields ◽  
Low Frequency ◽  
Solution Processing ◽  
Electrode Geometry ◽  
Large Area ◽  
Parallel Plate Capacitor ◽  
Low Frequency Vibration ◽  
Corona Poling

We study how ribbons of fluids subjected to electric fields can serve applications in energy harvesting. In particular the emphasis is on how the geometry (i.e. 2-D ribbons) can influence functionality. For applications related to energy harvesting, we consider the use of polymer Piezo-electric PolyvinylideneFluoride (PVDF). Corona poling, photo-induced, photo-thermal and electron beam poling are the different conventional techniques used for PVDF poling. The parallel plate capacitor structure made for poling the PVDF material while the PVDF is being cured. One key advantage of preparing PVDF is the ability of solution processing. Normally, the liquid is then spin coated on a substrate and left to dry. Either during the process of spin coating, or after drying - the film of PVDF is poled so as to align the dipoles and make a piezoelectric. We propose the use of a metal-insulator ribbon like electrode geometry to combine the process of fabrication and poling thereby making the process more efficient. On the application of a voltage across the electrodes, the voltage of Vs is developed across the fluid. This result in a field of Vs/d across the PVDF fills aiding the process of poling while the film is in liquid phase. Therefore the ribbon like geometry aids the use of PVDF piezo-electrics in two ways. Firstly, it makes the fabrication process efficient by combining the poling with the structure development. Secondly, the control of width (w) and length (l) aids the setup of the PVDF piezoelectric resonant frequency for a given thickness (d). This helps match the resonant frequency of the ribbon with the incoming low frequency vibration to improve the energy harvesting levels. Piezo-electrics can be used in submerged applications, large area PVDF energy scavengers, mechanical filters and sensors, rural electrification, and charging circuits for hand-held devices.

scholarly journals Improving functionality of vibration energy harvesters using magnets

2012 ◽  
Vol 23 (13) ◽  
pp. 1433-1449 ◽  
Author(s):  
Lihua Tang ◽  
Yaowen Yang ◽  
Chee-Kiong Soh
Keyword(s):  
Experimental Study ◽  
Energy Harvesting ◽  
Transition Region ◽  
Parametric Study ◽  
Low Frequency ◽  
Design Guidelines ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Energy Harvesters ◽  
Low Frequency Vibration

In recent years, several strategies have been proposed to improve the functionality of energy harvesters under broadband vibrations, but they only improve the efficiency of energy harvesting under limited conditions. In this work, a comprehensive experimental study is conducted to investigate the use of magnets for improving the functionality of energy harvesters under various vibration scenarios. First, the nonlinearities introduced by magnets are exploited to improve the performance of vibration energy harvesting. Both monostable and bistable configurations are investigated under sinusoidal and random vibrations with various excitation levels. The optimal nonlinear configuration (in terms of distance between magnets) is determined to be near the monostable-to-bistable transition region. Results show that both monostable and bistable nonlinear configurations can significantly outperform the linear harvester near this transition region. Second, for ultra-low-frequency vibration scenarios such as wave heave motions, a frequency up-conversion mechanism using magnets is proposed. By parametric study, the repulsive configuration of magnets is found preferable in the frequency up-conversion technique, which is efficient and insensitive to various wave conditions when the magnets are placed sufficiently close. These findings could serve as useful design guidelines when nonlinearity or frequency up-conversion techniques are employed to improve the functionality of vibration energy harvesters.

Multifunctional Energy Harvesting Locally Resonant Metastructures

2017 ◽  
Author(s):  
Christopher Sugino ◽  
Vinciane Guillot ◽  
Alper Erturk
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Electrical Power ◽  
Flexible Structures ◽  
Low Frequency ◽  
Load Resistance ◽  
Modeling Framework ◽  
Energy Harvesters ◽  
Low Frequency Vibration ◽  
Vibration Attenuation

Vibration-based energy harvesting is a growing field for generating low-power electricity to use in wireless electronic devices, such as the sensor networks used in structural health monitoring applications. Locally resonant metastructures, which are structures that comprise locally resonant metamaterial components, enable bandgap formation at wavelengths much longer than the lattice size, for critical applications such as low-frequency vibration attenuation in flexible structures. This work aims to bridge the domains of energy harvesting and locally resonant metamaterials to form multifunctional structures that exhibit both low-power electricity generation and vibration attenuation capabilities. A fully coupled electromechanical modeling framework is developed for two characteristic systems and their modal analysis is presented. Simulations are performed to explore the vibration and electrical power frequency response maps for varying electrical load resistance, and optimal loading conditions are presented. Case studies are presented to understand the interaction of bandgap formation and energy harvesting capabilities of this new class of multifunctional energy-harvesting locally resonant metastructures. It is shown that useful energy can be harvested from the locally resonant metastructure without significantly diminishing their dramatic vibration attenuation in the locally resonant bandgap. Thus, by integrating energy harvesters into a locally resonant metastructure, there is new potential for multifunctional self-powering or self-sensing locally resonant metastructures.

Sign in / Sign up

Export Citation Format

Share Document