scholarly journals Enhancing the Performance of Multilevel Inverters using Modified SVPWM Techniques

2020 ◽  
Vol 9 (3) ◽  
pp. 3632-3640
Keyword(s):  
Pulse Width ◽  
Pulse Width Modulation ◽  
Reference Signal ◽  
Multilevel Inverter ◽  
Energy Sources ◽  
Third Harmonic ◽  
Multilevel Inverters ◽  
Three Phase ◽  
Analysis Of Results ◽  
Sinusoidal Pulse Width Modulation

In this paper, two types seven-level multilevel inverters in three phase configuration, Cascaded H-bridge Multilevel Inverter (CMLI) and Diode Clamped Multilevel Inverter (DCMLI) are simulated and compared the results for three different carrier PWM techniques. Here, Carrier based Sinusoidal Pulse Width Modulation (SPWM), Third Harmonic Injected Pulse Width Modulation (THIPWM) and Modified Carrier-Based Space Vector Pulse Width Modulation (SVPWM) are used as modulation strategies. These modulation strategies include Phase Disposition technique (PD), Phase Opposition Disposition technique (POD), and Alternate Phase Opposition Disposition technique (APOD). In all the modulation strategies, triangular carrier and trapezoidal triangular carrier signals are compared with reference signal for generation of control pulses. The simulations have been carried out for seven-level CMLI and DCMLI using MATLAB/Simulink. The detailed analysis of results in terms of %THD and utilization of DC-link voltage has been presented in this paper. By increasing the performance of inverters the utilization of input energy is reduced, then the corresponding energy sources can be reduced.

Performance Analysis of FPGA based Diode Clamped Multilevel Inverter Fed Induction Motor Drive using Phase Opposition Disposition Multicarrier Based Modulation Strategy

2017 ◽  
Vol 8 (4) ◽  
pp. 1512
Author(s):  
Nunsavath Susheela ◽  
Satish Kumar
Keyword(s):  
Induction Motor ◽  
Pulse Width ◽  
Pulse Width Modulation ◽  
Multilevel Inverter ◽  
Multilevel Inverters ◽  
Modulation Technique ◽  
Three Phase ◽  
Field Programmable ◽  
Load Simulation ◽  
Sinusoidal Pulse Width Modulation

<p>Multilevel inverters (MLI) are becoming more popular over the years for medium and high power applications because of its significant merits over two level inverters. This paper presents an implementation of multicarrier based sinusoidal pulse width modulation technique for three phase seven level diode clamped multilevel inverter.  This topology is operated under phase opposition disposition pulse width modulation technique. The performance of three phase seven level diode clamped inverter is analyzed for induction motor (IM) load.  Simulation is performed using MATLAB/SIMULINK. Experimental results are presented to validate the effectiveness of the operation of the diode clamped multilevel inverter using field programmable gate array.</p>

scholarly journals Control Techniques for the Cascaded and Cross-switched Multilevel Inverter - A Comparison

2021 ◽  
Vol 309 ◽  
pp. 01120
Author(s):  
Sameera Shaik ◽  
Suresh Kumar Tummala ◽  
D Srinivasa Rao
Keyword(s):  
Pulse Width ◽  
Output Voltage ◽  
Pulse Width Modulation ◽  
Multilevel Inverter ◽  
Third Harmonic ◽  
Multilevel Inverters ◽  
Control Techniques ◽  
Harmonic Content ◽  
Sinusoidal Pulse Width Modulation ◽  
Injection Pulse

Nowadays, the multilevel inverter has gained huge attention and has become more popularized in high voltage and high-power applications with low harmonics. As the number of output voltage increases, the harmonic content of the output voltage waveform decreases. In this paper, a comparison of cascaded H-bridge and cross-switched multilevel inverters for 7, 9, 15, 21 levels will be carried out. The different control techniques that will be used for carrying out comparisons are space vector pulse width modulation (SPVPWM), sinusoidal pulse width modulation (SPWM), and third harmonic injection pulse width modulation (THI-PWM) respectively. Here, the seven-level inverter is discussed mainly and can be extended to any number of levels.

Performance Analysis of H-bridge and T-Bridge Multilevel Inverters for Harmonics Reduction

2018 ◽  
Vol 9 (1) ◽  
pp. 231 ◽  
Author(s):  
S. Usha ◽  
C. Subramani ◽  
A. Geetha
Keyword(s):  
Pulse Width ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Input Voltage ◽  
Multilevel Inverter ◽  
Multilevel Inverters ◽  
Semiconductor Switches ◽  
Output Waveform ◽  
Cascaded Multilevel Inverter ◽  
Sinusoidal Pulse Width Modulation

This paper deals with the design of cascaded 11 level H- bridge inverter. It includes a comparison between the 11 level H-bridge and T-bridge multilevel inverter. The cascaded inverter of higher level is a very effective and practical solution for reduction of total harmonic distortion (THD).These cascaded multilevel inverter can be used for higher voltage applications with more stability. As the level is increased the output waveform becomes more sinusoidal in nature. The inverter is designed using multicarrier sinusoidal pulse width modulation technique for generating triggering pulses for the semiconductor switches used in the device. Through this paper it will be proved that a cascaded multilevel H-bridge topology has higher efficiency than a T-bridge inverter, as whichever source input voltage is provided since input is equal to the output voltage. In T-bridge inverter, the output obtained is half of the applied input, so efficiency is just half as compared to H-bridge. The output waveform is distorted and has higher THD.  The simulation is performed using MATLAB /Simulink 2013 software.

scholarly journals Comparative Study of Total Harmonic Distortion in Multilevel Inverters Based WECS

2018 ◽  
Vol 7 (3.1) ◽  
pp. 42
Author(s):  
B Kandavel ◽  
G Uvaraj ◽  
M Manikandan
Keyword(s):  
Pulse Width ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Total Harmonic Distortion ◽  
Multilevel Inverters ◽  
Wind Speeds ◽  
Harmonic Content ◽  
Multi Level ◽  
Sinusoidal Pulse Width Modulation

This paper presents comparative study of Total Harmonic Distortion (THD) and its individual harmonic contents without grid and with grid for Diode clamped multi level inverter (DCMLI) and Flying capacitor clamped multilevel inverter (FCMLI) based Doubly Fed Induction Generator (DFIG) employing PI and Fuzzy logic controller (FLC). Simple method to control for a variable speed wind energy conversion system with a DFIG is connected to the grid through a diode rectifier and a diode clamped multilevel inverter (DCMLI). The DC-link voltage is controlled through a DC-DC boost converter to keep the DC voltage at constant value. Inverter is controlled by sinusoidal pulse width modulation technique, which supplies power to the grid. The THD and its harmonic content are studied for different wind speeds. DFIG fed flying capacitor multi level inverter (FCMLI) based WECS connected to load as well as grid. FCMLI is controlled through sinusoidal pulse width modulation. Voltage and current harmonics are studied. The results of both multilevel inverters are compared. It shows that the level of harmonic content of two types of multilevel inverters working at different wind speeds indicates that Total Harmonic Distortion (THD) for DCMLI has given best results.  

scholarly journals Three-Phase Symmetric Cascading Z-Source Seven Levels Multilevel Inverter Excited by Multi Carrier Sinusoidal Pulse Width Modulation Scheme

2019 ◽  
Vol 8 (10) ◽  
pp. 4269-4274
Keyword(s):  
Pulse Width ◽  
Output Voltage ◽  
Pulse Width Modulation ◽  
Multilevel Inverter ◽  
Modulation Scheme ◽  
Performance Parameters ◽  
Output Waveform ◽  
Three Phase ◽  
Sinusoidal Pulse Width Modulation ◽  
Z Sources

The Multilevel Z sources Inverter have been documented as attractive topologies used for elevated voltage adaptation. As the digit of levels improved, the synthesized set of steps output waveform have many ladder, imminent the preferred sine waveform but the major weakness of MLI be its amplitude of ac output voltage is imperfect to DC input sources voltage summing up. To conquer this drawback seven level cascading symmetric multilevel inverter based Z source inverter have been projected. This work focuses on different multi-carrier sinusoidal PWM scheme for the seven level three phase Z source symmetric cascading inverter. Performance parameters of seven level three phase Z source symmetric cascading inverter has been analyzed. A simulation circuit model of seven level three phase Z source symmetric cascading inverter urbanized using MATLAB/SIMULINK and its presentation have been urbanized.

scholarly journals Designing of Three Level 3 Phase Inverter Using Improved SPWM Modulation for different Loads

2021 ◽  
Vol 12 (3) ◽  
pp. 4513-4520
Author(s):  
Anshu Sharma Et.al
Keyword(s):  
Pulse Width ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Phase Inverter ◽  
Multilevel Inverters ◽  
Three Phase ◽  
Level 3 ◽  
Sinusoidal Pulse Width Modulation ◽  
Load Conditions ◽  
Fft Analysis

Many high voltage applications require three-phase inverters.  The major challenge in inverter designing is the mitigation of harmonic distortion (HD) to achieve better inverting performance. Usually, sinusoidal pulse width modulation (SPWM) is widely used to trigger the inverting switches for controlling the total HD performance in the inverter. To provide the option of multiple operating ranges the multilevel inverters are designed for higher voltage operations. This paper contributes in two passes, first, an improved SPWM modulation is generated for designing the three levels inverter. Then in the second pass, the performance of the THD is evaluated under the different load conditions using V-I measurement. THD is present in the system due to the use of switches. Therefore, this paper has evaluated the performance of the proposed improved SPWM based multilevel inverter for analysis. In order to improve the performance, the modulation index of the SPWM block is varied. The performance of the component report is also presented in the short..the output waveform of the line current and the voltage are compared; The FFT analysis is done to evaluate the comparison of THD performance. It is concluded that improving the SPWM performance and the lording conditions may improve the THD performance also.

scholarly journals Multicarrier SPWM Control Techniques for Three Phase Eleven Level Diode Clamped Multilevel Inverter and Hybrid Inverter with Reduced Number of Components

2018 ◽  
Vol 7 (3) ◽  
pp. 251
Author(s):  
N. Susheela ◽  
P. Satish Kumar
Keyword(s):  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Low Frequency ◽  
Multilevel Inverter ◽  
Multilevel Inverters ◽  
Control Techniques ◽  
Three Phase ◽  
Motor Load ◽  
Induction Motor Load ◽  
Sinusoidal Pulse Width Modulation

<p class="Els-Abstract-text">A comparative analysis of three phase eleven level diode clamped multilevel inverter (DCMLI) and hybrid inverter is performed in this paper in which the later requires fewer carrier signals, less number of devices and gate drive circuits. The performance is evaluated using phase disposition (PD), alternate phase opposition disposition (APOD) and carrier overlapping (CO) sinusoidal pulse width modulation (SPWM) methods. The hybrid multilevel inverter has superior features over diode clamped multilevel inverters and is more efficient since the positive levels of the inverter that are generated  by high frequency switches (level generation part), are reversed by low frequency switches (polarity generation part) when the voltage polarity is required to be changed for negative polarity. Therefore, the overall cost and complexity of the hybrid inverter are greatly reduced particularly for higher inverter output voltage levels. Simulation is performed for three phase eleven level diode clamped multilevel inverter and hybrid multilevel inverter using MATLAB/Simulink for induction motor load and the total harmonic distortion is evaluated at different load torques.</p>

scholarly journals Three Phase Eleven Level Modular Multilevel Inverter with PD-PWM for Grid Connected System

2020 ◽  
pp. 86-91
Author(s):  
P Yogini Dr. Sujatha Balaraman,
Keyword(s):  
Pulse Width ◽  
Output Voltage ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Multilevel Inverter ◽  
Utilization Factor ◽  
Multilevel Inverters ◽  
Three Phase ◽  
Conversion System ◽  
Effective Use

The prominence of Modular Multilevel Inverters (MMI) is rising owing their merits of simple mechanical construction and good voltage sharing for semiconductor devices. Mostly Multilevel Inverters use more than one source; however, the effective use of all the sources at all levels is rare. Conventional Multilevel Inverters will diminish the energy efficiency of the conversion system. When compared to conventional multilevel inverter, Modular Multilevel Inverter with a high numbers of voltage levels seem to be the most suitable because of the use of an isolated dc source. This paper explores a three-phase eleven level modular multilevel inverter with phase disposition pulse width modulation technique (PD-PWM) that can extract power from all the sources at all the levels. Besides, this paper develops a synchronous d-q reference frame controller to control the current of 11kV. When compared with Reduced Switch Count based Multilevel Inverter Series/Parallel switching topologies, the Modular Multilevel Inverter provides better Total Harmonic Distortion (THD) of output voltage and utilization factor.

Asymmetrical Cascaded Multi Level Inverter Using Control Freedom Pulse Width Modulation Techniques

2016 ◽  
Vol 7 (3) ◽  
pp. 854
Author(s):  
Periyaazhagar D ◽  
Irusapparajan G
Keyword(s):  
Pulse Width ◽  
Degrees Of Freedom ◽  
Pulse Width Modulation ◽  
Multilevel Inverter ◽  
Switching Frequency ◽  
Three Phase ◽  
Modulation Techniques ◽  
Multi Level ◽  
Cascaded Multilevel Inverter ◽  
Sinusoidal Pulse Width Modulation

In this paer, the suggested topologies are gained by cascading a full bridge inverter with dissimilar DC sources. This topology has a several new patterns adopting the fixed switching frequency, multicarrier control freedom degree with mixture conceptions are established and simulated for the preferred three-phase cascaded multilevel inverter. In outstanding switching arrangement terminations, there are convinced degrees of freedom to produce the nine level AC output voltages with terminated switching positions for producing altered output voltages. These investigations focus on asymmetrical cascaded multilevel inverter engaging with carrier overlapping pulse width modulation (PWM) topologies. These topologies offer less amount of harmonics present in the output voltage and superior root mean square (RMS) values of the output voltages associated with the traditional sinusoidal pulse width modulation. This research studies carries with it MATLAB/SIMULINK based simulation and experimental results obtained using appropriated prototype to prove the validity of the proposed concept.

Sign in / Sign up

Export Citation Format

Share Document