scholarly journals 210 Mw Turbo Generator’s Hydrogen Gas Cooling System Online Monitoring and Controlling using Node Red Flow Based IoT

2019 ◽  
Vol 8 (6S2) ◽  
pp. 82-87
Keyword(s):  
Power Plants ◽  
Online Monitoring ◽  
Cooling System ◽  
Hydrogen Gas ◽  
Gas Cooling ◽  
Machine Interface ◽  
Hydrogen Cooling ◽  
Hydrogen Level ◽  
Basic Prerequisite ◽  
The Ideal

This undertaking is about plan and execution of remote observing and controlling of 210 MW TURBO GENERATOR'S HYDROGEN COOLING SYSTEM utilizing NODE RED BASED IOT PROGRAM. The quicker heat scattering of generators in power plants calls for hydrogen cooling, and water is utilized as coolant to chill off the hot hydrogen which turns out from the hydrogen cooling framework (HCS) at the producing end. Along these lines, in enormous creating plants, the way toward cooling and the coolant become basic pieces of the warmth exchangers. Subsequently, necessity of a dependable HCS is an unquestionable requirement. The primary point of this task is to naturally refill the hydrogen gas in the hydrogen cooling arrangement of turbo generators at whatever point the hydrogen level gets diminished than the ideal hydrogen level. This framework functions admirably in both ordinary necessity conditions and furthermore during basic prerequisite conditions, when there is a surprising spillage in the framework. The whole procedure control and observing, famously known as human–machine interface of HCS, has been created and reproduced on NODE RED BASED IOT PROGRAM. [1],[ 3],[5]

An Estimation of the Performance Limits of Dry Cooling on Trough-Type Solar Thermal Plants

2008 ◽  
Author(s):  
Huifang Deng ◽  
Robert F. Boehm
Keyword(s):  
Power Plants ◽  
High Efficiency ◽  
Cooling System ◽  
Low Cost ◽  
Performance Limits ◽  
Cooling Systems ◽  
Solar Power Plants ◽  
Solar Resource ◽  
Dry Cooling ◽  
The Ideal

The southwestern US is an ideal location for solar power plants due to its abundant solar resource, while there is a difficulty in implementing wet cooling systems due to the shortage of water in this region. Dry cooling could be an excellent solution for this, if it could achieve a high efficiency and low cost as wet cooling. Some dry cooling systems are currently in operation, and investigations of their performance have been reported in the literature. This paper looks into the limits to the power production implicit in dry cooling, assuming that improvements might be made to the system components. Use of higher performance heat transfer surfaces is one such possible improvement. We have developed a model of a fairly typical, but simplified, solar trough plant, and simulated thermodynamic performance of this with the software Gatecycle. We have examined the power generation and cycle efficiency of the plant for the Las Vegas vicinity with conventional wet cooling and conventional dry cooling cases considered separately using this software. TMY2 data are used for this location for this purpose. Similarly, the same studies are carried out for “ideal” cooling systems as a comparison. We assumed that in the ideal dry cooling system, the condensing temperature is the ambient dry bulb temperature, and in the ideal wet cooling system, it is the ambient wet bulb temperature. It turned out that the ideal dry cooling system would significantly outperform the conventional wet cooling system, indicating the possibility of the dry cooling system being able to achieve increased performance levels with component improvements.

Human reliability in non-destructive inspections of nuclear power plant components: modeling and analysis

2019 ◽  
Vol 7 (2B) ◽  
Author(s):  
Vanderley Vasconcelos ◽  
Wellington Antonio Soares ◽  
Raissa Oliveira Marques ◽  
Silvério Ferreira Silva Jr ◽  
Amanda Laureano Raso
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Human Factors ◽  
Nuclear Power ◽  
Power Plants ◽  
Failure Modes ◽  
Cooling System ◽  
Human Reliability ◽  
Non Destructive ◽  
Plant Components

Non-destructive inspection (NDI) is one of the key elements in ensuring quality of engineering systems and their safe use. This inspection is a very complex task, during which the inspectors have to rely on their sensory, perceptual, cognitive, and motor skills. It requires high vigilance once it is often carried out on large components, over a long period of time, and in hostile environments and restriction of workplace. A successful NDI requires careful planning, choice of appropriate NDI methods and inspection procedures, as well as qualified and trained inspection personnel. A failure of NDI to detect critical defects in safety-related components of nuclear power plants, for instance, may lead to catastrophic consequences for workers, public and environment. Therefore, ensuring that NDI is reliable and capable of detecting all critical defects is of utmost importance. Despite increased use of automation in NDI, human inspectors, and thus human factors, still play an important role in NDI reliability. Human reliability is the probability of humans conducting specific tasks with satisfactory performance. Many techniques are suitable for modeling and analyzing human reliability in NDI of nuclear power plant components, such as FMEA (Failure Modes and Effects Analysis) and THERP (Technique for Human Error Rate Prediction). An example by using qualitative and quantitative assessesments with these two techniques to improve typical NDI of pipe segments of a core cooling system of a nuclear power plant, through acting on human factors issues, is presented.

Optimization of fog inlet air cooling system for combined cycle power plants using genetic algorithm

2015 ◽  
Vol 76 ◽  
pp. 449-461 ◽  
Author(s):  
Mehdi A. Ehyaei ◽  
Mojtaba Tahani ◽  
Pouria Ahmadi ◽  
Mohammad Esfandiari
Keyword(s):  
Genetic Algorithm ◽  
Power Plants ◽  
Cooling System ◽  
Combined Cycle ◽  
Air Cooling ◽  
Air Cooling System

Inlet Air Cooling Applied to Combined Cycle Power Plants: Influence of Site Climate and Thermal Storage Systems

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Nicola Palestra ◽  
Giovanna Barigozzi ◽  
Antonio Perdichizzi
Keyword(s):  
Power Output ◽  
Parametric Analysis ◽  
Power Plants ◽  
Cooling System ◽  
Thermal Storage ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Cooling Systems

The paper presents the results of an investigation on inlet air cooling systems based on cool thermal storage, applied to combined cycle power plants. Such systems provide a significant increase of electric energy production in the peak hours; the charge of the cool thermal storage is performed instead during the night time. The inlet air cooling system also allows the plant to reduce power output dependence on ambient conditions. A 127MW combined cycle power plant operating in the Italian scenario is the object of this investigation. Two different technologies for cool thermal storage have been considered: ice harvester and stratified chilled water. To evaluate the performance of the combined cycle under different operating conditions, inlet cooling systems have been simulated with an in-house developed computational code. An economical analysis has been then performed. Different plant location sites have been considered, with the purpose to weigh up the influence of climatic conditions. Finally, a parametric analysis has been carried out in order to investigate how a variation of the thermal storage size affects the combined cycle performances and the investment profitability. It was found that both cool thermal storage technologies considered perform similarly in terms of gross extra production of energy. Despite this, the ice harvester shows higher parasitic load due to chillers consumptions. Warmer climates of the plant site resulted in a greater increase in the amount of operational hours than power output augmentation; investment profitability is different as well. Results of parametric analysis showed how important the size of inlet cooling storage may be for economical results.

Design of cooling system for inspection manipulator and analysis based on experiment

2016 ◽  
Vol 43 (2) ◽  
pp. 231-240 ◽  
Author(s):  
Tan Chen ◽  
Wei-jun Zhang ◽  
Jian-jun Yuan ◽  
Liang Du ◽  
Ze-yu Zhou
Keyword(s):  
High Temperature ◽  
Cooling System ◽  
Insulation Material ◽  
Water Cooling ◽  
Content Type ◽  
Cooling Method ◽  
Temperature Experiment ◽  
Gas Cooling ◽  
Loop Feedback ◽  
Electrical Components

Purpose – This paper aims to present a different cooling method (water cooling) to protect all the mechanical/electrical components for Tokamak in-vessel inspection manipulator. The method is demonstrated effective through high temperature experiment, which provides an economical and robust approach for manipulators to work normally under high temperature. Design/methodology/approach – The design of cooling system uses spiral copper tube structure, which is versatile for all types of key components of manipulator, including motors, encoders, drives and vision systems. Besides, temperature sensors are set at different positions of the manipulator to display temperature data to construct a close-loop feedback control system with cooling components. Findings – The cooling system for the whole inspection manipulator working under high temperature is effective. Using insulation material such as rubber foam as component coating can significantly reduce the environmental heat transferred to cooling system. Originality/value – Compared with nitrogen gas cooling applied in robotic protection design, although it is of less interest in prior research, water cooling method proves to be effective and economical through our high temperature experiment. This paper also presents an energetic analysis method to probe into the global process of water cooling and to evaluate the cooling system.

scholarly journals Dimensioning Studies for Reversible Hydro Power Plants in Portuguese Islands

2018 ◽  
Vol 4 (1) ◽  
pp. 77-86
Author(s):  
Nuno Fonseca ◽  
André Madureira ◽  
João Peças Lopes ◽  
Manuel Matos
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Power Plants ◽  
Hydro Power ◽  
Power Resources ◽  
Hydro Power Plants ◽  
Pumped Storage ◽  
Energetic Level ◽  
Energy Surplus ◽  
The Ideal

This work is within the scope of set of consultancy studies made for Portuguese islands. It focuses on the integration of Pumped Storage Power in isolated islands. The paper starts to address several power systems circumstances about two Portuguese islands on the energetic level. For each of these islands, an independent examination of the conditions to install a reversible hydro power plant is accomplished. Therefore, the energy volume to be stored due to excess of renewable generation and the ideal power and number of the pumps and turbines to be installed were identified and evaluated for the sake of using the produced energy surplus as to be pumped and later generated. The paper enhances the importance of storing energy in the operation of isolated and small systems with considerable amount of intermittent power resources as well as the conditions for the viability of installing new exploitations of this kind.

Selecting updated version of compressor station gas cooling system with due regard for equipment life cycle cost

2008 ◽  
Vol 44 (5-6) ◽  
pp. 269-274
Author(s):  
A. V. Krupnikov ◽  
A. D. Vanyashov ◽  
I. A. Yanvarev ◽  
Yu. A. Pilyaeva
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Cooling System ◽  
Compressor Station ◽  
Gas Cooling
Sign in / Sign up

Export Citation Format

Share Document