Effect of Viscous Dissipation on MHD Williamson Nanofluid Flow in a Porous Medium

2019 ◽  
Vol 8 (3) ◽  
pp. 5795-5802 ◽  
Keyword(s):  
Porous Medium ◽  
Steady State ◽  
Numerical Solution ◽  
Viscous Dissipation ◽  
Flow Problem ◽  
Numerical Study ◽  
Steady State Flow ◽  
Nanofluid Flow ◽  
Shooting Technique ◽  
Order Four

The main objective of this paper is to focus on a numerical study of viscous dissipation effect on the steady state flow of MHD Williamson nanofluid. A mathematical modeled which resembles the physical flow problem has been developed. By using an appropriate transformation, we converted the system of dimensional PDEs (nonlinear) into coupled dimensionless ODEs. The numerical solution of these modeled ordinary differential equations (ODEs) is achieved by utilizing shooting technique together with Adams-Bashforth Moulton method of order four. Finally, the results of discussed for different parameters through graphs and tables.

An Experimental and Numerical Study of the Steady-State Flow of a SI-Engine Intake Port

1998 ◽  
Author(s):  
H. Bensler ◽  
C. Freek ◽  
B. Beesten ◽  
A. Ritter ◽  
A. W. Hentschel
Keyword(s):  
Steady State ◽  
Numerical Study ◽  
Intake Port ◽  
Steady State Flow ◽  
Si Engine ◽  
State Flow

Numerical Solution of the Planar Hydrostatic Foil Bearing

1979 ◽  
Vol 101 (1) ◽  
pp. 86-91 ◽  
Author(s):  
A. Eshel
Keyword(s):  
Steady State ◽  
Film Thickness ◽  
Computer Program ◽  
Numerical Solution ◽  
Asymptotic Approach ◽  
State Problem ◽  
Shooting Technique ◽  
Foil Bearing ◽  
Approach To Steady State ◽  
Steady State Problem

The steady state problem of the planar hydrostatic foil bearing is analyzed and solved numerically. Two techniques of solution are used. One method is simulation in time with asymptotic approach to steady state. This is achieved by a preprocessor which automatically sets up the numerical computer program. The second method is an iterative shooting technique. The results agree well with one another. Curves of pressure and typical film thickness versus flow are presented.

The effect of viscous dissipation on laminar nanofluid flow in a microchannel heat sink

2009 ◽  
Vol 223 (11) ◽  
pp. 2697-2706 ◽  
Author(s):  
M Ghazvini ◽  
M A Akhavan-Behabadi ◽  
M Esmaeili
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Viscous Dissipation ◽  
Heat Sink ◽  
Volume Fraction ◽  
Numerical Study ◽  
Microchannel Heat Sink ◽  
Fluid Temperature ◽  
Nanofluid Flow ◽  
Aspect Ratios

The present article focuses on analytical and numerical study on the effect of viscous dissipation when nanofluid is used as the coolant in a microchannel heat sink (MCHS). The nanofluid is made from CuO nanoparticles and water. To analyse the MCHS, a modified Darcy equation for the fluid and two-equation model for heat transfer between fluid and solid sections are employed in porous media approach. In addition, to deal with nanofluid heat transfer, a model based on the Brownian motion of nanoparticles is used. The model evaluates the thermal conductivity of nanofluid considering the thermal boundary resistance, nanoparticle diameter, volume fraction, and the fluid temperature. At first, the effects of particle volume fraction on temperature distribution and overall heat transfer coefficient are investigated with and without considering viscous dissipation. After that, the influence of different channel aspect ratios and porosities is studied. The results show that for nanofluid flow in microchannels, the viscous dissipation can be neglected for low volume fractions and aspect ratios only. Finally, the effect of porosity and Brinkman number on the overall Nusselt number is studied, where asymptotic behaviour of the Nusselt number is observed and discussed from the energy balance point of view.

Sign in / Sign up

Export Citation Format

Share Document