Highways Design Taking into Account Climatic Features in the Route Area

2021 ◽  
pp. 125-136
Author(s):  
Т. В. Самодурова ◽  
Н. Ю. Алимова ◽  
О. А. Волокитина ◽  
О. В. Гладышева
Keyword(s):  
Bearing Capacity ◽  
Computer Aided Design ◽  
Systematic Approach ◽  
Weather Conditions ◽  
Design Stage ◽  
Design System ◽  
Computer Aided ◽  
Calculation Methodology ◽  
Aided Design ◽  
Climatic Features

Постановка задачи. Для получения оптимальных проектных решений, удовлетворяющих условиям безопасности движения в сложных погодных условиях, необходимо сравнение вариантов автомобильных дорог по условиям снегонезаносимости. Такие расчеты должны стать составной частью системы автоматизированного проектирования САПР-АД. Результаты. Предложен системный поход к решению задачи, определен перечень информации, необходимой для проведения расчетов. Выполнен анализ результатов исследований по снегозаносимости дорог, проводимых в России и за рубежом. Предложены расчетные схемы и модели для оценки вариантов продольного профиля и земляного полотна автомобильной дороги по снегозаносимости. Предложены решения для оценки вариантов плана трассы с использованием карт с расчетными параметрами метелей. Выводы. Реализация предложенной методики проведения расчетов позволит на стадии проектирования оценить варианты автомобильной дороги по условиям снегозаносимости. Statement of the problem. In order to obtain optimal design solutions that meet the conditions of safety traffic in difficult weather conditions, it is necessary to compare the options of highways according to the snow tolerance conditions. Such calculations should become an integral part of the CAD-AD computer-aided design system. Results. A systematic approach to solving the problem is set forth, a list of information necessary for calculations is identified. The results analysis of studies on the snow-bearing capacity of roads conducted in Russia and abroad is carried out. Calculation schemes and models are suggested to evaluate options for the longitudinal profile and the roadbed for the snow-bearing capacity. Solutions for evaluating variants of the route plan using maps with calculated parameters of snowstorms are proposed. Conclusions. The implementation of the proposed calculation methodology will make it possible at the design stage to evaluate the options of the highway according to the conditions of the snow-bearing capacity.

JUSTIFICATION FOR CHOOSING THE OPTIMAL WEIGHT OF THE STRUCTURE DURING DESIGN

2020 ◽  
Author(s):  
T. P Savostina ◽  
◽  
S.S. Kosyachenko
Keyword(s):  
Computer Aided Design ◽  
Total Mass ◽  
Design Stage ◽  
Design System ◽  
Technical Object ◽  
Optimal Weight ◽  
Computer Aided ◽  
Movement Mechanism ◽  
Aided Design

This article is devoted to research in the field of determining the optimal weight of the structure at the design stage. As an example, the article considers the electric hoist as a unified technical object consisting of separate independent blocks: the lifting mechanism, the movement mechanism, suspension elements and brakes. The computer-aided design system allows you to perform calculations of individual blocks in different layouts, which significantly reduces the time spent on design. The result of choosing the optimal mass of the structure was a variant of the layout with a minimum total mass.

scholarly journals ДОСЛІДЖЕННЯ КІНЕМАТИЧНИХ ПАРАМЕТРІВ МАШИНИ ДЛЯ ОБРОБКИ ДЕТАЛЕЙ З ДВОМА ЄМКОСТЯМИ, ЩО ВИКОНУЮТЬ СКЛАДНИЙ ПРОСТОРОВИЙ РУХ

2021 ◽  
Vol 146 (3) ◽  
pp. 25-36
Author(s):  
М. Г. Залюбовський ◽  
І. В. Панасюк ◽  
В. В. Малишев
Keyword(s):  
3D Modeling ◽  
Kinematic Analysis ◽  
Computer Aided Design ◽  
Design Stage ◽  
Design System ◽  
Kinematic Pair ◽  
Spatial Motion ◽  
Kinematic Parameters ◽  
Computer Aided ◽  
Aided Design

Investigation of the main kinematic parameters of a shredding machine with two moving tanks connected by a translational kinematic pair and performing complex spatial motion to be able to further predict the technological result at the design stage of such equipment and the corresponding technological operations of machining parts.  Using the SolidWorks-2016 Motion computer-aided design system, 3D modeling was carried out, followed by kinematic analysis, of a machine for processing parts with two movable capacities, which are interconnected by a translational kinematic pair and perform complex spatial motion. The essence of kinematic analysis was to determine the linear velocities and accelerations of points that coincide with the ends of the working tanks of the machine. Based on 3D modeling and kinematic analysis in the SolsdWorks-2016 Motion computer-aided design system, some kinematic parameters of the machine are determined, in particular, the law of the change in the angular velocity of the driven shaft of the machine is obtained in the form of graphical dependencies, the change in the translational speed and translational acceleration of four points, which are conventionally located in the center, is studied the ends of each of the working capacities. The relationship between some kinematic parameters of the developed machine design with two moving capacities that perform complex spatial motion is established. It was found that the kinematic parameters of the two tanks of the machine differ from each other, as a result of which, during the execution of the corresponding technological operations, the intensity of movement of the working array in the two capacities will differ from each other. In addition, the ends of each of the working capacities move with almost the same kinematic parameters, which will facilitate the movement of the working array between the opposite ends of both tanks in opposite directions with the same intensity. The results obtained make it possible to determine the most rational functional purpose of the machine under study.

Structural Analysis of Product and Computer-Aided Assembly Planning in AssemBL Software Package

2018 ◽  
pp. 11-33
Author(s):  
A. N. Bozhko
Keyword(s):  
Computer Aided Design ◽  
State Of The Art ◽  
Graph Model ◽  
Design System ◽  
Assembly Planning ◽  
Complex Products ◽  
Assembly Sequences ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design

Computer-aided design of assembly processes (Computer aided assembly planning, CAAP) of complex products is an important and urgent problem of state-of-the-art information technologies. Intensive research on CAAP has been underway since the 1980s. Meanwhile, specialized design systems were created to provide synthesis of assembly plans and product decompositions into assembly units. Such systems as ASPE, RAPID, XAP / 1, FLAPS, Archimedes, PRELEIDES, HAP, etc. can be given, as an example. These experimental developments did not get widespread use in industry, since they are based on the models of products with limited adequacy and require an expert’s active involvement in preparing initial information. The design tools for the state-of-the-art full-featured CAD/CAM systems (Siemens NX, Dassault CATIA and PTC Creo Elements / Pro), which are designed to provide CAAP, mainly take into account the geometric constraints that the design imposes on design solutions. These systems often synthesize technologically incorrect assembly sequences in which known technological heuristics are violated, for example orderliness in accuracy, consistency with the system of dimension chains, etc.An AssemBL software application package has been developed for a structured analysis of products and a synthesis of assembly plans and decompositions. The AssemBL uses a hyper-graph model of a product that correctly describes coherent and sequential assembly operations and processes. In terms of the hyper-graph model, an assembly operation is described as shrinkage of edge, an assembly plan is a sequence of shrinkages that converts a hyper-graph into the point, and a decomposition of product into assembly units is a hyper-graph partition into sub-graphs.The AssemBL solves the problem of minimizing the number of direct checks for geometric solvability when assembling complex products. This task is posed as a plus-sum two-person game of bicoloured brushing of an ordered set. In the paradigm of this model, the brushing operation is to check a certain structured fragment for solvability by collision detection methods. A rational brushing strategy minimizes the number of such checks.The package is integrated into the Siemens NX 10.0 computer-aided design system. This solution allowed us to combine specialized AssemBL tools with a developed toolkit of one of the most powerful and popular integrated CAD/CAM /CAE systems.

Use of the designer's experience in systems of computer-aided design and artificial intelligence

2021 ◽  
pp. 89-95
Author(s):  
А.И. Гайкович ◽  
С.И. Лукин ◽  
О.Я. Тимофеев
Keyword(s):  
Artificial Intelligence ◽  
Fuzzy Sets ◽  
Computer Aided Design ◽  
Design Tool ◽  
Design System ◽  
Design Problems ◽  
General Arrangement ◽  
Computer Aided ◽  
A Chain ◽  
Aided Design

Процесс создания проекта судна или корабля рассматривается как преобразование информации, содержащейся в техническом задании на проектирование, нормативных документах и знаниях проектанта, в информацию, объем которой позволяет реализовать проект. Проектирование может быть представлено как поиск решения в пространстве задач. Построение цепочки последовательно решаемых задач составляет методику проектирования. Проектные задачи могут быть разбиты на две группы. Первая группа ‒ это полностью формализуемые задачи, для решения которых есть известные алгоритмы. Например, построение теоретического чертежа по известным главным размерениям и коэффициентам формы. Ко второй группе задач можно отнести трудно формализуемые или неформализуемые задачи. Например, к задачам этого типа можно отнести разработку общего расположения корабля. Важнейшим инструментом проектирования современного корабля или судна является система ав­томатизированного проектирования (САПР). Решение САПР задач первой группы не представляет проблемы. Введение в состав САПР задач второй группы подразумевает разработку специального ма­тематического аппарата, базой для которого, которым является искусственный интеллект, использующий теорию нечетких множеств. Однако, настройка искусственных нейронных сетей, создание шкал для функций принадлежности элементов нечетких множеств и функций предпочтений лица принимающего решения, требует участие человека. Таким образом, указанные элементы искусственного интеллекта фиксируют качества проек­танта как специалиста и создают его виртуальный портрет. The process of design a project of a ship is considered as the transformation of information contained in the design specification, regulatory documents and the designer's knowledge into information, the volume of which allows the project to be implemented. Designing can be represented as a search for a solution in the space of problems. The construction of a chain of sequentially solved tasks constitutes the design methodology. Design problems can be divided into two groups. The first group is completely formalizable tasks, for the solution of which there are known algorithms. For example, the construction of ship's surface by known main dimensions and shape coefficients. Tasks of the second group may in­clude those which are difficult to formalize or non-formalizable. For example, tasks of this type can include develop­ment of general arrangement of a ship. The most important design tool of a modern ship or vessel is a computer-aided design system (CAD). The solu­tion of CAD problems of the first group is not a problem. Introduction of tasks of the second group into CAD implies development of a special mathematical apparatus, the basis for which is artificial intelligence, which uses the theory of fuzzy sets. However, the adjustment of artificial neural networks, the creation of scales for membership functions of fuzzy sets elements and functions of preferences of decision maker, requires human participation. Thus, the above elements of artificial intelligence fix the qualities of the designer as a specialist and create his virtual portrait.

scholarly journals Development of integrated intelligent computer-aided design system for mechanical power-transmitting mechanism design

2017 ◽  
Vol 9 (7) ◽  
pp. 168781401771038 ◽  
Author(s):  
Isad Saric ◽  
Adil Muminovic ◽  
Mirsad Colic ◽  
Senad Rahimic
Keyword(s):  
Rapid Prototyping ◽  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Numerical Control ◽  
Numerical Control ◽  
Mechanical Power ◽  
Design System ◽  
Computer Aided ◽  
Aided Design ◽  
Intelligent Computer

This article presents architecture of integrated intelligent computer-aided design system for designing mechanical power-transmitting mechanisms (IICADkmps). The system has been developed in C# program environment with the aim of automatising the design process. This article presents a modern, automated approach to design. Developed kmps modules for calculation of geometrical and design characteristics of mechanical power-transmitting mechanisms are described. Three-dimensional geometrical parameter modelling of mechanical power-transmitting mechanisms was performed in the computer-aided design/computer-aided manufacturing/computer-aided engineering system CATIA V5. The connection between kmps calculation modules and CATIA V5 modelling system was established through initial three-dimensional models – templates. The outputs from the developed IICADkmps system generated final three-dimensional virtual models of mechanical power-transmitting mechanisms. Testing of the developed IICADkmps system was performed on friction, belt, cogged (spur and bevel gears) and chain transmitting mechanisms. Also, connection of the developed IICADkmps system with a device for rapid prototyping and computer numerical control machines was made for the purpose of additional testing and verification of practical use. Physical prototypes of designed characteristic elements of mechanical power-transmitting mechanisms were manufactured. The selected test three-dimensional virtual prototypes, obtained as an output from the developed IICADkmps system, were manufactured on the device for rapid prototyping (three-dimensional colour printer Spectrum Z510) and computer numerical control machines. Finally, at the end of the article, conclusions and suggested possible directions of further research, based on theoretical and practical research results, are presented.

Sign in / Sign up

Export Citation Format

Share Document