scholarly journals ELECTROMAGNETIC INFLUENCE OF TRACTION NETWORKS 94 kV ON PIPELINES

2020 ◽  
Vol 2020 (1) ◽  
pp. 223-224
Author(s):  
Aleksandr Kryukov ◽  
Aleksandr Cherepanov
Keyword(s):  
Power Supply ◽  
Oil And Gas ◽  
Induced Voltage ◽  
Railway Line ◽  
The Earth ◽  
Traction Network ◽  
Main Pipelines ◽  
Traction Power Supply ◽  
Supply Systems ◽  
Traction Power

Steel pipelines for transporting oil and gas can run along the routes of AC main railways. As a result of the electromagnetic influence of traction networks on pipes having insulating coatings, voltages can be induced that are hazardous to personnel who operate the pipeline. The report addressed the issues of modeling the electromagnetic effects of a promising traction network of 94 kV on a steel pipeline with a diameter of 250 mm laid on the surface of the earth. Computer simulation showed that at a distance of 100 meters from the railway line to the pipeline, the maximum induced voltage reaches 100 V, which is more than one and a half times the permissible value. This factor must be taken into account when designing prospective traction power supply systems in the areas of their convergence with main pipelines

scholarly journals MODELING TRACTION NETWORKS WHEN PASSING HEAVY TRAINS

2020 ◽  
Vol 2020 (1) ◽  
pp. 207-208
Author(s):  
Andrey Kryukov ◽  
Evgeniy Bezridnyy
Keyword(s):  
Power Supply ◽  
Power Supply System ◽  
Harmonic Distortion ◽  
Current Collectors ◽  
Traction Network ◽  
External Power ◽  
Traction Power Supply ◽  
Supply Systems ◽  
Computer Studies ◽  
Traction Power

The results of computer studies of the modes of traction power supply systems when passing trains weighing 12,000 tons are presented. The parameters are compared with the situation when trains are moving weighing 3,000 tons. It is shown that increasing the mass of trains with the same traffic volume leads to an increase in currents in the traction network, a decrease in voltage at the current collectors, the growth of asymmetry and harmonic distortion in the external power supply system

Improvement of External and Traction Power Supply System’s Efficiency by Normalizing the Schemes

2021 ◽  
Vol 64 (4-5) ◽  
pp. 72-78
Author(s):  
Nikolai Grigoriev ◽  
◽  
Ivan Ignatenko ◽  
Vladimir Kovalev ◽  
Polina Trofimovich ◽  
...  
Keyword(s):  
Transmission Line ◽  
Power Supply ◽  
Power Transmission ◽  
Power Transmission Line ◽  
Electric Transmission ◽  
Traction Network ◽  
Traction Substations ◽  
Traction Power Supply ◽  
Supply Systems ◽  
Traction Power

The article deals with improvement off the efficiency of external and traction power supply systems using for example indicators of traction substations for a real electric transmission line segment of a traction network of 25 kV. The analysis of the functioning of a real section of electrified railways with traction substations, two of which are connected according to the "feeding" scheme is providing in the article. The currents in the wind-ings of traction transformers are calculate for these substations. The proportion of the currents values of the most loaded winding to the two less loaded is 2: 1. The coefficient asymmetry of currents of transformer wind-ings operating on existing traction substations is equal to 1. The results prove a significant currents asymmetry of transformers windings and phases of electric transmission lines which leads to an increasing voltage unbal-ance. New schemes for connecting traction substations for the considered section of electrified railways have been developed in order to improve the quality indicators of electrical energy. New connection schemes for three traction substations, determined according to the requirements for connecting to the external and trac-tion power supply system are presents in the article. The calculation for new schemes of connecting traction substations, similar to the previously considered option, has been performed. The values of winding currents, power transmission line phases and coefficient asymmetry were obtained for new substation connection schemes. The proposed schemes for connecting traction substations provide a decrease in the coefficient asym-metry of the winding currents from 1 to 0.5 and a decrease in the current modulus in the most loaded windings by 1.5 times. New schemes for connecting traction substations reduce the currents of the most loaded windings and phases of the power transmission line, as well as the asymmetry of currents, which ensures an improvement in the efficiency of the external and traction power supply systems of the real traction network.

scholarly journals Control of electromagnetic environment in smart traction power supply systems

2019 ◽  
Vol 91 ◽  
pp. 01009
Author(s):  
Natalya Buyakova ◽  
Vasiliy Zakaryukin ◽  
Andrey Kryukov
Keyword(s):  
Magnetic Field ◽  
Field Strength ◽  
Magnetic Field Strength ◽  
Power Supply ◽  
Electromagnetic Environment ◽  
Traction Network ◽  
Traction Power Supply ◽  
Supply Systems ◽  
The Magnetic Field ◽  
Traction Power

The possibility of reducing the intensity of magnetic field created by a traction network of an alternating current electrified railroad is considered in the article. The electric field of such a traction network at a height of 1,8 m above is relatively small. In order to control the electromagnetic situation, 2x25 kV traction systems, sucking transformers with a return wire for the 25 kV system, amplifying and shielding wires of the traction network, passive screens on passenger platforms, optimization of train traffic schedules can be used. Fazonord software package developed at the Irkutsk State Transport University was used as a tool for the analysis of the above events. Using computer simulations, it was shown that the most effective methods for reducing the magnetic field strength are the use of screens on passenger platforms, optimal train schedules, and the use of “soft” train driving modes. The latter measure is able to reduce the peak magnetic field strength by about 25%.

scholarly journals The method for increasing the efficiency of equipment’s maintenance in railway traction power supply systems

2018 ◽  
Vol 47 (3) ◽  
pp. 39-47 ◽  
Author(s):  
Oleksandr Matusevych ◽  
Valeriy Kuznetsov ◽  
Viktor SYCHENKO
Keyword(s):  
Power Supply ◽  
Operational Reliability ◽  
Technical Condition ◽  
Repair System ◽  
Maintenance And Repair ◽  
Traction Substations ◽  
Electric Equipment ◽  
Traction Power Supply ◽  
Supply Systems ◽  
Traction Power

Purpose. To develop the method for increasing the efficiency of the equipment’s maintenance and repair system, ensuring necessary level of operational reliability of the equipment, safety and reliability of the electric equipment with minimal expenses on operation. Relevance. Aging of the power equipment in railway power supply systems sharply raised a need for assessment of its states and degree of risk for operation outside rated service life. In critical conditions of technological processes and operational modes of the railways it is necessary to increase the equipment’s operational reliability. The scheduled maintenance and repair system whose main technical and economic criterion is the minimum of equipment’s downtimes on the basis of a rigid regulation of repair cycles, in the conditions of market regulations in the field of repair in many cases does not provide the optimal decisions due to insufficient financing. The solution of this problem is possible by improvement of the maintenance and repair system. Under these conditions the main direction for supporting the operational reliability of power electric equipment on TS is a development of the modern methods based on individual supervision over real changes of technical condition of power equipment. Scientific novelty. In this article the authors proposed an integrated approach, on the basis of which can be developed the effective maintenance and repair system for traction power supply systems. Proposed approach allowed to react quickly to changes of service conditions on traction substations, to control the technical condition of power electric equipment under the conditions of uncertainty, to establish interrelation between quality of service and operational reliability of the equipment, to choose a service strategy on traction substations. Practical importance. The validity of the developed method was confirmed by the results of calculations and practically by choosing the optimal maintenance's option for transformer TDTN-25000/150-70 U1 (ТДТН-25000/150-70 У1) on traction power supply substation.

Sign in / Sign up

Export Citation Format

Share Document