scholarly journals DESIGN OF AN OCEAN WAVE ENERGY CONVERTER – THE PRELIMINARY STUDY

2020 ◽  
pp. 1-4
Author(s):  
UZAIR JAUHAR ALI ◽  
SHARUL SHAM BIN DOL ◽  
ABID ABDUL AZEEZ
Keyword(s):  
Kinetic Energy ◽  
United Arab Emirates ◽  
Wave Energy ◽  
Hydraulic Motor ◽  
Energy Converter ◽  
Hybrid Device ◽  
Wave Energy Converters ◽  
Ocean Wave Energy ◽  
The Earth ◽  
Preliminary Study

Wave Energy Converters (WEC) are devices that harvest the different energies that are associated with moving waves, such as kinetic energy and potential energy, and converting them into useful mechanical and electrical energies. Considering that the ocean and sea are covering around 71 percent of the earth, it is unavoidable to consider it as the main source of renewable energy. This report starts with reviewing a few of the most recent WECs. In the analysis section, it shows a device that functions using pistons to run a hydraulic motor, which then runs a generator in a system. The device is further modified by attaching a rotating mass, which is directly connected to a generator. It is a hybrid device using technologies of both the Pelamis and the Penguin. The power output calculated for the system is 177 kW, which is quiet reasonable considering the wave conditions at Fujairah’s sea shore in United Arab Emirates.

Towards a Definition and Metric for the Survivability of Ocean Wave Energy Converters

2010 ◽  
Author(s):  
Adam Brown ◽  
Robert Paasch ◽  
Irem Y. Tumer ◽  
Pukha Lenee-Bluhm ◽  
Justin Hovland ◽  
...  
Keyword(s):  
Wave Energy ◽  
Energy Content ◽  
Ocean Waves ◽  
Wave Energy Converter ◽  
Ocean Wave ◽  
Energy Converter ◽  
Term Survival ◽  
Wave Energy Converters ◽  
Ocean Wave Energy ◽  
Energy Converters

Survivability is a term that is widely used in the ocean wave energy industry, but the term has never been defined in that context. The word itself seems to have an intrinsic meaning that people understand; this fact often leads to the term’s misuse and its confusion with “reliability”. In order to design systems that are capable of long term survival in the ocean environment, it must be clear what “survivability” means and how it affects the design process and ultimately the device being deployed. Ocean energy is relatively predictable over the span of months, days, and even hours, which makes it very promising as a form of renewable energy. However, the variation of the energy content of ocean waves in a given location is likely high due to the effect of storms and the seasons. Wave energy converters must be built to be reliable while operating and survivable during severe conditions. Therefore, probabilistic design practices must be used to insure reliability and survivability in conditions that are constantly changing. Reliability is used to numerically express the failures of a device that occur while the system is operational, and it is usually expressed in terms of the mean time between failure (MTBF). However, in the context of ocean wave energy converters, the devices are likely to be continuously deployed in conditions that push them beyond their operating limits. During these times it is likely that wave energy converters will be placed in some sort of “survival mode” where the device sheds excess power, reducing system loading. Survivability is focused specifically on failures that occur during these times, when the device is experiencing conditions that surpass its operational limits. Developing a highly survivable wave energy converter is an outstanding goal, but without a standard definition of the term survivability, progress towards that goal cannot be measured. The purpose of this paper is to provide an initial definition for survivability, and to introduce a simple metric that provides an objective comparison of the survivability of varying wave energy converter technologies.

Design, Fabrication, Simulation and Testing of a Novel Ocean Wave Energy Converter

2015 ◽  
Author(s):  
Changwei Liang ◽  
Junxiao Ai ◽  
Lei Zuo
Keyword(s):  
Wave Energy ◽  
Energy Demand ◽  
Energy Resource ◽  
Wave Energy Converter ◽  
Ocean Wave ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Ocean Wave Energy ◽  
Linear Electromagnetic Motor ◽  
Energy Converters

The total useful wave resource around the world is estimated to be larger than 2 TW. Harvesting a small portion of the available wave energy resource could contribute significantly to meet the urgent energy demand. Therefore, a lot of wave energy converters have been developed in the past decades. Traditionally, air turbine, hydroelectric motor and linear electromagnetic motor are used in wave energy converters as the power takeoff system. Although these power takeoffs have their own advantages, power takeoffs are still recognized as the most important challenge in ocean wave energy technology. In this paper, a mechanical motion rectifier (MMR) based power takeoff system is proposed and prototyped for wave energy converter. This power takeoff system can convert the bi-directional wave motion into unidirectional rotation of the generator by integrating two one-way clutches into a rack pinion system. A 500W prototype which contains a heaving buoy and MMR-based power takeoff system was designed and fabricated. The models of power takeoff system and the corresponding single-buoy wave energy converter are built and analyzed. Lab testing of power takeoff mechanism and ocean testing of the overall ocean wave converter system are also conducted.

scholarly journals Optimizing the Power Take Off of a Wave Energy Converter With Regard to the Wave Climate

2005 ◽  
Vol 128 (1) ◽  
pp. 56-64 ◽  
Author(s):  
Gaelle Duclos ◽  
Aurelien Babarit ◽  
Alain H. Clément
Keyword(s):  
Wave Energy ◽  
Simple Wave ◽  
Wave Climate ◽  
Wave Energy Converter ◽  
Optimal Parameters ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Classical Wave ◽  
Project Site ◽  
Wave Conditions

Considered as a source of renewable energy, wave is a resource featuring high variability at all time scales. Furthermore wave climate also changes significantly from place to place. Wave energy converters are very often tuned to suit the more frequent significant wave period at the project site. In this paper we show that optimizing the device necessitates accounting for all possible wave conditions weighted by their annual occurrence frequency, as generally given by the classical wave climate scatter diagrams. A generic and very simple wave energy converter is considered here. It is shown how the optimal parameters can be different considering whether all wave conditions are accounted for or not, whether the device is controlled or not, whether the productive motion is limited or not. We also show how they depend on the area where the device is to be deployed, by applying the same method to three sites with very different wave climate.

Optimization of Mooring Configuration Parameters of Floating Wave Energy Converters

2011 ◽  
Author(s):  
Pedro C. Vicente ◽  
Anto´nio F. O. Falca˜o ◽  
Paulo A. P. Justino
Keyword(s):  
Wave Energy ◽  
Oil And Gas ◽  
Wave Energy Converter ◽  
Domain Model ◽  
Floating Point ◽  
Mooring System ◽  
Energy Converter ◽  
Energy Devices ◽  
Wave Energy Converters ◽  
Energy Converters

Floating point absorbers devices are a large class of wave energy converters for deployment offshore, typically in water depths between 40 and 100m. As floating oil and gas platforms, the devices are subject to drift forces due to waves, currents and wind, and therefore have to be kept in place by a proper mooring system. Although similarities can be found between the energy converting systems and floating platforms, the mooring design requirements will have some important differences between them, one of them associated to the fact that, in the case of a wave energy converter, the mooring connections may significantly modify its energy absorption properties by interacting with its oscillations. It is therefore important to examine what might be the more suitable mooring design for wave energy devices, according to the converters specifications. When defining a mooring system for a device, several initial parameters have to be established, such as cable material and thickness, distance to the mooring point on the bottom, and which can influence the device performance in terms of motion, power output and survivability. Different parameters, for which acceptable intervals can be established, will represent different power absorptions, displacements from equilibrium position, load demands on the moorings and of course also different costs. The work presented here analyzes what might be, for wave energy converter floating point absorber, the optimal mooring configuration parameters, respecting certain pre-established acceptable intervals and using a time-domain model that takes into account the non-linearities introduced by the mooring system. Numerical results for the mooring forces demands and also motions and absorbed power, are presented for two different mooring configurations for a system consisting of a hemispherical buoy in regular waves and assuming a liner PTO.

On the Array of Wave Energy Converters: The Case of the Coaxial-Duct OWC

2018 ◽  
Author(s):  
J. C. C. Portillo ◽  
J. C. C. Henriques ◽  
R. P. F. Gomes ◽  
L. M. C. Gato ◽  
A. F. O. Falcão
Keyword(s):  
Wave Energy ◽  
Oscillating Water Column ◽  
Economic Activities ◽  
Energy Converter ◽  
Diverse Range ◽  
Wave Energy Converters ◽  
Large Size ◽  
New Findings ◽  
Water Columns ◽  
Oscillating Water Columns

This work focuses on the initial performance assessment of an array of coaxial-duct (CD) oscillating-water-columns (owc’s) with potential to be used as multipurpose platform for the creation of value in a diverse range of offshore economic activities. The coaxial-duct owc (CD-owc) is an axisymmetric oscillating-water-column wave energy converter that has been studied for both small-size and large-size applications. This work focuses on buoys of 12 meter diameter distributed in an array of five devices, rigidly attached to each other, to form a cluster of owc’s. The objective of the study is to assess the performance of the array with this configuration and estimate the effect of parameters such as distance between devices, various modes of movements, and other constraints on the overall power output of the array. Results of different cases are compared to the performance of an isolated device to determine the interference effect of other devices. Some results validate previous research conclusions and new findings on the behavior coaxial-duct owc are presented.

scholarly journals Loads on a Point-Absorber Wave Energy Converter in Regular and Focused Extreme Wave Events

2020 ◽  
Author(s):  
Eirini Katsidoniotaki ◽  
Edward Ransley ◽  
Scott Brown ◽  
Johannes Palm ◽  
Jens Engström ◽  
...  
Keyword(s):  
Wave Energy ◽  
Wave Train ◽  
Offshore Structures ◽  
Wave Energy Converter ◽  
Extreme Waves ◽  
Extreme Wave ◽  
Energy Converter ◽  
Point Absorber ◽  
Wave Energy Converters ◽  
Extreme Loads

Abstract Accurate modeling and prediction of extreme loads for survivability is of crucial importance if wave energy is to become commercially viable. The fundamental differences in scale and dynamics from traditional offshore structures, as well as the fact that wave energy has not converged around one or a few technologies, implies that it is still an open question how the extreme loads should be modeled. In recent years, several methods to model wave energy converters in extreme waves have been developed, but it is not yet clear how the different methods compare. The purpose of this work is the comparison of two widely used approaches when studying the response of a point-absorber wave energy converter in extreme waves, using the open-source CFD software OpenFOAM. The equivalent design-waves are generated both as equivalent regular waves and as focused waves defined using NewWave theory. Our results show that the different extreme wave modeling methods produce different dynamics and extreme forces acting on the system. It is concluded that for the investigation of point-absorber response in extreme wave conditions, the wave train dynamics and the motion history of the buoy are of high importance for the resulting buoy response and mooring forces.

scholarly journals Validation of a CFD-based numerical wave tank model for the power production assessment of the wavestar ocean wave energy converter

2020 ◽  
Vol 146 ◽  
pp. 2499-2516 ◽  
Author(s):  
Christian Windt ◽  
Josh Davidson ◽  
Edward J. Ransley ◽  
Deborah Greaves ◽  
Morten Jakobsen ◽  
...  
Keyword(s):  
Wave Energy ◽  
Power Production ◽  
Wave Energy Converter ◽  
Ocean Wave ◽  
Numerical Wave Tank ◽  
Energy Converter ◽  
Tank Model ◽  
Wave Tank ◽  
Ocean Wave Energy ◽  
Numerical Wave

Design and Potential Application of Small Scale Wave Energy Converter

2017 ◽  
Author(s):  
Tunde O. Aderinto ◽  
Francisco Haces-Fernandez ◽  
Hua Li
Keyword(s):  
Wave Energy ◽  
Energy Production ◽  
Energy Resource ◽  
Appropriate Technology ◽  
Wave Energy Converter ◽  
Small Scale ◽  
Ocean Energy ◽  
Energy Converter ◽  
Wave Energy Converters ◽  
Wave Properties

Although theoretical available wave energy is higher than most of ocean energy sources, the commercial utilization of wave energy is much slower than other ocean energy sources. The difficulty of integration with the electrical grid system and the challenges of the installation, operation and maintenance of large energy generation and transmission systems are the major reasons. Even though there are successfully tested models of wave energy converters, the fact that wave energy is directly affected by wave height and wave period makes the actual wave energy output with high variation and difficult to be predicted. And most of the previous studies on wave energy and its utilization have focused on the large scale energy production that can be integrated into a power grid system. In this paper, the authors identify and discuss stand-alone wave energy converter systems and facilities that are not connected to the electricity grid with focus on small scale wave energy systems as potential source of energy. For the proper identification, qualification and quantification of wave energy resource potential, wave properties such as wave height and period need to be characterized. This is used to properly determine and predict the probability of the occurrence of these wave properties at particular locations, which enables the choice of product design, installation, operation and maintenance to effectively capture wave energy. Meanwhile, the present technologies available for wave energy converters can be limited by location (offshore, nearshore or shoreline). Therefore, the potential applications of small scale stand-alone wave energy converter are influenced by the demand, location of the need and the appropriate technology to meet the identified needs. The paper discusses the identification of wave energy resource potentials, the location and appropriate technology suitable for small scale wave energy converter. Two simplified wave energy converter designs are created and simulated under real wave condition in order to estimate the energy production of each design.

Sign in / Sign up

Export Citation Format

Share Document