High-Performance-Fräsbearbeitung von Graphitelektroden/High-Performance-milling of graphite electrodes – Potentials of monolithic ceramic end milling tool

2020 ◽  
Vol 110 (11-12) ◽  
pp. 790-795
Author(s):  
Eckhart Uhlmann ◽  
Julian Polte ◽  
Christoph Hein ◽  
Christian Jahnke ◽  
Mitchel Polte ◽  
...  
Keyword(s):  
Electrical Discharge ◽  
High Performance ◽  
Electrical Discharge Machining ◽  
End Milling ◽  
Life Time ◽  
Machining Processes ◽  
Graphite Electrodes ◽  
New Approach ◽  
Milling Tool ◽  
Milling Tools

Mittels Fräsen gefertigte Formelektroden aus Feinkorngraphit sind für die Funkenerosion essentiell. Die spezifischen Werkstoffeigenschaften des Graphits resultieren in einer hervorragenden Zerspanbarkeit mit hohen Zeitspanvolumina QW und einer effizienten Anwendung in der Funkenerosion. Allerdings sind die Standzeiten TSt der Fräswerkzeuge durch einen ausgeprägten Werkzeugverschleiß stark limitiert. Die Verringerung des Werkzeugverschleißes stellt somit ein Potenzial für weitere Effizienzsteigerungen dar. Eine Perspektive bietet der Einsatz vollkeramischer Fräswerkzeuge. Milled graphite electrodes are essential for electrical discharge machining processes. The properties of the graphite allow high material removal rates QW and an effective application in electrical discharge machining. The life time TSt of the milling tools is limited by an extended wear at the same time. For this purpose, monolithic ceramic end milling tools are a promising new approach.

Experimental Study of Machining of Shape Memory Alloys Using Dry Micro Electrical Discharge Machining Process

2018 ◽  
Author(s):  
Sagil James ◽  
Sharadkumar Kakadiya
Keyword(s):  
Shape Memory Alloys ◽  
Shape Memory ◽  
Electrical Discharge ◽  
Material Removal ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Dielectric Medium ◽  
Machining Process ◽  
Machining Processes ◽  
Micro Electrical Discharge Machining

Shape Memory Alloys are smart materials that tend to remember and return to its original shape when subjected to deformation. These materials find numerous applications in robotics, automotive and biomedical industries. Micromachining of SMAs is often a considerable challenge using conventional machining processes. Micro-Electrical Discharge Machining is a combination of thermal and electrical processes, which can machine any electrically conductive material at micron scale independent of its hardness. It employs dielectric medium such as hydrocarbon oils, deionized water, and kerosene. Using liquid dielectrics has adverse effects on the machined surface causing cracking, white layer deposition, and irregular surface finish. These limitations can be minimized by using a dry dielectric medium such as air or nitrogen gas. This research involves the experimental study of micromachining of Shape Memory Alloys using dry Micro-Electrical Discharge Machining process. The study considers the effect of critical process parameters including discharge voltage and discharge current on the material removal rate and the tool wear rate. A comparison study is performed between the Micro-Electrical Discharge Machining process with using the liquid as well as air as the dielectric medium. In this study, microcavities are successfully machined on shape memory alloys using dry Micro-Electrical Discharge Machining process. The study found that the dry Micro-Electrical Discharge Machining produces a comparatively better surface finish, has lower tool wear and lesser material removal rate compared to the process using the liquid as the dielectric medium. The results of this research could extend the industrial applications of Micro Electrical Discharge Machining processes.

An extensive review on sustainable developments of dry and near-dry electrical discharge machining processes

2021 ◽  
pp. 1-37
Author(s):  
Sampath Boopathi
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Optimization Techniques ◽  
Machining Process ◽  
Working Fluid ◽  
Dielectric Fluid ◽  
Extensive Literature ◽  
Machining Processes ◽  
Research Activities ◽  
Dry Edm

Abstract Electrical discharge machining (EDM) is very essential unconventional electro-thermal machining process to machine the contour profile of hard materials in modern production industries. The liquid dielectric fluid has been replaced by the gas and minimum quantity of liquid mixed with gas (gas-mist) to encourage the green machining processes. The various gases and gas-mist have been used as the working fluid in dry and near-dry EDM respectively. The research-contextual, various dielectric fluids, sustainable and innovative developments, process parameters, machining characteristics, and optimization techniques applied in various dry and near-dry EDM have been illustrated through an extensive literature survey. Future research opportunities in both dry and near-dry EDM have been summarized to promote eco-friendly EDM research activities.

A Multiobjective Genetic-Algorithm-Based Optimization of Micro-Electrical Discharge Drilling

2021 ◽  
pp. 676-698
Author(s):  
Deepak Rajendra Unune ◽  
Amit Aherwar
Keyword(s):  
Genetic Algorithm ◽  
Process Parameters ◽  
Inconel 718 ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
Machining Processes ◽  
Micro Electrical Discharge Machining ◽  
Electrical Discharge Drilling ◽  
Machining Rate

Inconel 718 superalloy finds wide range of applications in various industries due to its superior mechanical properties including high strength, high hardness, resistance to corrosion, etc. Though poor machinability especially in micro-domain by conventional machining processes makes it one of the “difficult-to-cut” material. The micro-electrical discharge machining (µ-EDM) is appropriate process for machining any conductive material, although selection of machining parameters for higher machining rate and accuracy is difficult task. The present study attempts to optimize parameters in micro-electrical discharge drilling (µ-EDD) of Inconel 718. The material removal rate, electrode wear ratio, overcut, and taper angle have been selected as performance measures while gap voltage, capacitance, electrode rotational speed, and feed rate have been selected as process parameters. The optimum setting of process parameters has been obtained using Genetic Algorithm based multi-objective optimization and verified experimentally.

scholarly journals Wire Electrical Discharge Machining—A Review

Machines ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 69
Author(s):  
Laurenţiu Slătineanu ◽  
Oana Dodun ◽  
Margareta Coteaţă ◽  
Gheorghe Nagîţ ◽  
Irina Beşliu Băncescu ◽  
...  
Keyword(s):  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Machining Process ◽  
Wire Electrical Discharge Machining ◽  
Wire Electrode ◽  
Machining Processes ◽  
Scientific Papers ◽  
The Wire ◽  
Machining Productivity ◽  
Machined Surfaces

Wire electrical discharge machining has appeared mainly in response to the need for detachment with sufficiently high accuracy of parts of plate-type workpieces. The improvements introduced later allowed the extension of this machining technology to obtain more complex ruled surfaces with increasingly high requirements regarding the quality of the machined surfaces and the productivity of the wire electrical discharge machining process. Therefore, it was normal for researchers to be interested in developing more and more in-depth investigations into the various aspects of wire electrical discharge machining. These studies focused first on improving the machining equipment, wire electrodes, and the devices used to position the clamping of a wire electrode and workpiece. A second objective pursued was determining the most suitable conditions for developing the machining process for certain proper situations. As output parameters, the machining productivity, the accuracy, and roughness of the machined surfaces, the wear of the wire electrode, and the changes generated in the surface layer obtained by machining were taken into account. There is a large number of scientific papers that have addressed issues related to wire electrical discharge machining. The authors aimed to reveal the aspects that characterize the process, phenomena, performances, and evolution trends specific to the wire electrical discharge machining processes, as they result from scientific works published mainly in the last two decades.

scholarly journals Experimental Study on the Influence of Machining Conditions on the Quality of Electrical Discharge Machined Surfaces of aluminum alloy Al5052

Machines ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 12 ◽  
Author(s):  
Angelos P. Markopoulos ◽  
Emmanouil-Lazaros Papazoglou ◽  
Panagiotis Karmiris-Obratański
Keyword(s):  
Aluminum Alloy ◽  
Electrical Discharge ◽  
Electrical Discharge Machining ◽  
Removal Rate ◽  
White Layer ◽  
Machining Parameters ◽  
Machining Processes ◽  
Machining Conditions ◽  
Pulse On Time ◽  
Machined Surfaces

Although electrical discharge machining (EDM) is one of the first established non-conventional machining processes, it still finds many applications in the modern industry, due to its capability of machining any electrical conductive material in complex geometries with high dimensional accuracy. The current study presents an experimental investigation of ED machining aluminum alloy Al5052. A full-scale experimental work was carried out, with the pulse current and pulse-on time being the varying machining parameters. The polishing and etching of the perpendicular plane of the machined surfaces was followed by observations and measurements in optical microscope. The material removal rate (MRR), the surface roughness (SR), the average white layer thickness (AWLT), and the heat affected zone (HAZ) micro-hardness were calculated. Through znalysis of variance (ANOVA), conclusions were drawn about the influence of machining conditions on the EDM performances. Finally, semi empirical correlations of MRR and AWLT with the machining parameters were calculated and proposed.

Sign in / Sign up

Export Citation Format

Share Document