Main problem: Ensuring environmental safety of thermal power plants by reducing emissions of harmful substances, in particular nitrogen oxides. When all types of fossil fuel, including solid fuel, are burned, nitrogen oxides are formed in the boilers of TPPs. The sources of their formation are air nitrogen and nitrogen- containing components of the organic matter of the fuel. As you know, they adversely affect the health of humans, plants and animals. Therefore, it became necessary to consider and analyze methods to reduce these emissions. Purpose: To review and analyze various ways to reduce nitrogen oxide emissions and propose a new scheme for reducing these emissions by recirculating flue gases. Methods: This is achieved due to the fact that in the known method for purifying the flue gases of steam generators from nitrogen oxides by lowering the temperature in the furnace of the steam generator by supplying flue gases with a temperature below the temperature in the furnace of the steam generator, it is proposed that the flue gases be fed into the furnace of the steam generator after ash cleaning. At the same time, as a result of the supply of recirculated gas cooled after filtering and passing through the main smoke exhauster into the combustion chamber, having a temperature of 110-170 °C, in comparison with the initial version, a greater decrease in temperature in the furnace of the steam generator occurs, which in turn leads to a decrease in the flue gases of oxides nitrogen, since the chemical reaction of their formation goes with the absorption of heat. Results and their importance: The technical result at the proposed method of cleaning from nitrogen oxides is to reduce the consumption of electricity by eliminating the collateral wear of the recirculation gas duct, due to the cleaning of time gases from ash (a requirement of the rules of technical operation of PTE).
CO2 Removal Technology from Flue Gases Containing SO2 at Thermal Power Plants.