scholarly journals Re-Assessment of an Earth fill Dam using Finite Element Method and Limit Equilibrium Method (Case study of Latamber Dam, Pakistan)

2020 ◽  
Vol 71 (2) ◽  
pp. 87-102
Author(s):  
Afnan Ahmad ◽  
Shahid Ali ◽  
Mujahid Khan ◽  
Indra Sati Hamonangan Harahap ◽  
Muhammad Sagheer Aslam
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Equilibrium Method ◽  
Earth Fill ◽  
Element Method

Slope Stability Analysis of Jiu-Fen Using Finite Element Method and Limit Equilibrium Method

2012 ◽  
Vol 170-173 ◽  
pp. 1064-1067
Author(s):  
Shong Loong Chen ◽  
Chun Fu Lin
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Slope Stability ◽  
Displacement Vector ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
The Finite Element Method ◽  
Safety Factors ◽  
Equilibrium Method ◽  
Element Method

This study simulates the slope stability at Jiu-Fen, using the limit equilibrium method and the finite element method. The limit equilibrium method can find potential slide surfaces and safety factors rapidly. The advantage of the finite element method is that it utilizes more reasonable soil behavior and boundary conditions. A critical slide surface obtained by the limit equilibrium method can be compared with the displacement vector, stress field and location of plastic zone obtained by the finite element method. Furthermore, we can compare the safety factors produced by the two methods. This study shows that the safety factor from the limit equilibrium method is higher than that from the finite element method. The displacement analysis by the finite element method agrees well with the progressive slope failure. So, if we combine the two methods using monitored data in the field, we can analyze slope stability clearly.

Application Study on the Stability of Xiufengsi Landslide by Using Limit Equilibrium Method and Finite Element Method

2013 ◽  
Vol 671-674 ◽  
pp. 180-185
Author(s):  
Qing Wang ◽  
Lei Hua Yao ◽  
Ning Zhang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Application Study ◽  
Equilibrium Method ◽  
The Stability ◽  
Comparison Of The Results ◽  
Residential Quarters ◽  
Element Method

Xiufengsi Landslide is an ancient landslide in Wushan County, Chongqing, China. Under natural condition, this landslide is stable. Due to the Three Gorges Reservoir, however, the water level in this region fluctuates within the range of [145 m, 175 m], periodically. Furthermore, an increasing number of residential quarters have been built on this landslide that also increase the possibility of occurrences of the landslide. Motivated by the government’s desire to take measures in control the landslide, we use two approaches to study the stability of this landslide. Under different computational conditions, the safety factors of the landslide are calculated by using limit equilibrium method and finite element method, respectively. Based on the comparison of the results, the stability of the landslide is analyzed more objectively and comprehensively. This work also lends insight into the landslide forecast.

Landslide Stability Analysis Based on GeoStudio

2013 ◽  
Vol 634-638 ◽  
pp. 3701-3704 ◽  
Author(s):  
Rui Wang ◽  
Xi Wang ◽  
Kun Yin ◽  
Yang Zhao
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Stability Analysis ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Sliding Surface ◽  
Landslide Stability ◽  
Equilibrium Method ◽  
Element Method

In order to monitor landslide risk, GeoStudio software is frequently applied to landslide stability analysis. In this paper, Juting landslide in Shanxi was subjected by GeoStudio software, while limit equilibrium method was adopted to calculate the landslide stability in the slip surface. The solutions of stress and displacement vector were gotten through SIGMA / W module on the landslide for finite element method in sliding surface stress analysis. And it was also used to import the results obtained in SIGMA / W module into SLOPE / W module to calculate safety factor and the potential sliding surface. The result shows that the calculated safety factors which are worked out by those two ways are close to each other, and limit equilibrium method can be used in landslide stability analysis, but the finite element method is more consistent with the actual situation. GeoStudio software can calculate landslide stability coefficient conveniently, and can express potential slip surface intuitively, providing reliable foundation for landslide stability analysis.

Stability and Seismic Behavior of Landslide with Deep Overburden Layer in Kala Hydropower Station, China

2012 ◽  
Vol 594-597 ◽  
pp. 148-154
Author(s):  
Zhuo Li ◽  
Jiang Da He ◽  
Hong Qiang Xie ◽  
Hua Lin Yang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Safety Factors ◽  
Dynamic Finite Element ◽  
Equilibrium Method ◽  
Landslide Mass ◽  
The Stability ◽  
Element Method

Landslide induced by earthquakes is one of serious seismic secondary disasters. For some large-scale landslide as discussed in the study, both rigid limit equilibrium method and dynamic finite element method are applied to comparatively analyze the stability against sliding under typical working conditions, and to reveal dynamic response characteristics. Results show that rainfall and earthquake have significant influences on the stability of landslide mass, and the safety factors under rainfall and seismic conditions do not satisfy relevant specifications. The similar results are obtained by dynamic finite element method, but the safety factors are larger than that of rigid limit equilibrium method. The landslide belongs to thrust load caused landslide, featuring upper tension damage and lower shear damage. Some measures, such as cutting slope and reducing load, shear tunnel, anchor tunnel, are recommended to reinforce the landslide mass.

Frontal Impact Analysis of an Interprovincial Bus Using the Finite Element Method: Case Study in Ecuador

2020 ◽  
pp. 312-320
Author(s):  
Luis Santos-Correa ◽  
Diego Pineda-Maigua ◽  
Fernando Ortega-Loza ◽  
Jhonatan Meza-Cartagena ◽  
Ignacio Abril-Naranjo ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Impact Analysis ◽  
Frontal Impact ◽  
The Finite Element Method ◽  
Element Method

Structural-Acoustic Design at High Frequency Using the Energy Finite Element Method

1995 ◽  
Author(s):  
Robert J. Bernhard ◽  
John E. Huff
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
High Frequency ◽  
Energy Flow ◽  
Flow Analysis ◽  
Element Formulation ◽  
Joint Models ◽  
Energy Flow Analysis ◽  
Element Method

Abstract Energy flow analysis methods, particularly as implemented using the finite element method, are useful as design techniques for high frequency structural-acoustic applications. In this paper, the derivation of energy flow analysis techniques are summarized. Particular attention is given to the specification of joint models for situations where there is a discontinuity in either geometric properties or material properties. The finite element formulation of this approach is also summarized. A case study is included to illustrate the utility of the method as a design technique.

Landslide Simulation Using Limit Equilibrium and Finite Element Method

2016 ◽  
Vol 857 ◽  
pp. 555-559 ◽  
Author(s):  
Zuhayr Md Ghazaly ◽  
Mustaqqim Abdul Rahim ◽  
Kok Alfred Chee Jee ◽  
Nur Fitriah Isa ◽  
Liyana Ahmad Sofri
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Factor Of Safety ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Main Concern ◽  
Analysis Method ◽  
Stability Of Slope ◽  
The Stability ◽  
Element Method

Slope stability analysis is one of the ancient tasks in the geotechnical engineering. There are two major methods; limit equilibrium method (LEM) and finite element method (FEM) that were used to analyze the factor of safety (FOS) to determine the stability of slope. The factor of safety will affect the remediation method to be underdesign or overdesign if the analysis method was not well chosen. This can lead to safety and costing problems which are the main concern. Furthermore, there were no statement that issued one of the analysis methods was more preferred than another. To achieve the objective of this research, the soil sample collected from landslide at Wang Kelian were tested to obtain the parameters of the soils. Then, those results were inserted into Plaxis and Slope/W software for modeling to obtain the factor of safety based on different cases such as geometry and homogenous of slope. The FOS obtained by FEM was generally lower compared to LEM but LEM can provide an obvious critical slip surface. This can be explained by their principles. Overall, the analysis method chosen must be based on the purpose of the analysis.

Sign in / Sign up

Export Citation Format

Share Document