A Study on the Analysis of the Causes of Other Vacant Houses in Local Area in Japan with High Rate of Other Vacant Houses - Focused on Cities, Towns and Villages in Kagoshima Prefecture, Japan

Voice over Internet Protocol (VoIP) has grown quickly in the world of telecommunication. Wireless Local Area Networks (WLANs) are the most performance assuring technology for wireless networks, and WLANs have facilitated high-rate voice services at low cost and good flexibility. In a voice conversation, each client works as a sender or a receiver depending on the direction of traffic flow over the network. A VoIP application requires high throughput, low packet loss, and a high fairness index over the network. The packets of VoIP streaming may experience drops because of the competition among the different kinds of traffic flow over the network. A VoIP application is also sensitive to delay and requires the voice packets to arrive on time from the sender to the receiver side without any delay over WLAN. The scheduling system model for VoIP traffic is an unresolved problem. The objectives of this paper are to identify scheduler issues. This comprehensive structure of Novel Voice Priority Queue (VPQ) scheduling system model for VoIP over WLAN discusses the essential background of the VPQ schedulers and algorithms. This paper also identifies the importance of the scheduling techniques over WLANs.

Download Full-text

Size Dependence of Bombardment Characteristics Produced by Cluster Ion Beams

MRS Proceedings ◽

10.1557/proc-504-93 ◽

1997 ◽

Vol 504 ◽

Cited By ~ 4

Author(s):

T. Seki ◽

M. Tanomura ◽

T. Aoki ◽

J. Matsuo ◽

I. Yamada

Keyword(s):

Ion Beam ◽

Local Area ◽

Carbon Cluster ◽

High Rate ◽

Cluster Ions ◽

Scanning Tunneling ◽

Cluster Ion Beams ◽

Cluster Ion ◽

Ion Impact ◽

The Impact

ABSTRACTCluster ion beam processes provide new surface modification techniques, such as surface smoothing, high rate sputtering and very shallow implantation, because of the unique interactions between cluster and surface atoms. To understand interactions with cluster and surface, Scanning Tunneling Microscope (STM) observations have been done for single impact traces.Highly Oriented Pyrolitic Graphite (HOPG) surfaces were bombarded by carbon cluster ions (Va≤300kV), and large ridges and craters have been observed as a result of single cluster ion impact. The impact site diameters are proportional to the cluster size up to 10 atoms, and increase drastically for cluster sizes above 10. This indicates that non-linear multiple collisions occur only when a local area is bombarded by more than 10 atoms at the same time.

Download Full-text

Comprehensive Structure of Novel Voice Priority Queue Scheduling System Model for VoIP over WLANs

Global Applications of Pervasive and Ubiquitous Computing ◽

10.4018/978-1-4666-2645-4.ch027 ◽

2013 ◽

pp. 257-278

Author(s):

Kashif Nisar ◽

Angela Amphawan ◽

Suhaidi B. Hassan

Keyword(s):

Traffic Flow ◽

Low Cost ◽

Local Area ◽

Priority Queue ◽

High Rate ◽

System Model ◽

Scheduling System ◽

Queue Scheduling ◽

Voice Packets ◽

The Voice

Voice over Internet Protocol (VoIP) has grown quickly in the world of telecommunication. Wireless Local Area Networks (WLANs) are the most performance assuring technology for wireless networks, and WLANs have facilitated high-rate voice services at low cost and good flexibility. In a voice conversation, each client works as a sender or a receiver depending on the direction of traffic flow over the network. A VoIP application requires high throughput, low packet loss, and a high fairness index over the network. The packets of VoIP streaming may experience drops because of the competition among the different kinds of traffic flow over the network. A VoIP application is also sensitive to delay and requires the voice packets to arrive on time from the sender to the receiver side without any delay over WLAN. The scheduling system model for VoIP traffic is an unresolved problem. The objectives of this paper are to identify scheduler issues. This comprehensive structure of Novel Voice Priority Queue (VPQ) scheduling system model for VoIP over WLAN discusses the essential background of the VPQ schedulers and algorithms. This paper also identifies the importance of the scheduling techniques over WLANs.

Download Full-text

Structure of Palladium Single-Crystal Films Prepared by Flash Evaporation onto (001) NaCl Substrates

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069272 ◽

1970 ◽

Vol 28 ◽

pp. 456-457

Author(s):

L. E. Murr ◽

G. Wong

Keyword(s):

Single Crystal ◽

High Vacuum ◽

Ultra High Vacuum ◽

High Rate ◽

Flash Evaporation ◽

Optimum Load ◽

Single Crystal Films ◽

Crystal Films ◽

A Current

Palladium single-crystal films have been prepared by Matthews in ultra-high vacuum by evaporation onto (001) NaCl substrates cleaved in-situ, and maintained at ∼ 350° C. Murr has also produced large-grained and single-crystal Pd films by high-rate evaporation onto (001) NaCl air-cleaved substrates at 350°C. In the present work, very large (∼ 3cm2), continuous single-crystal films of Pd have been prepared by flash evaporation onto air-cleaved (001) NaCl substrates at temperatures at or below 250°C. Evaporation rates estimated to be ≧ 2000 Å/sec, were obtained by effectively short-circuiting 1 mil tungsten evaporation boats in a self-regulating system which maintained an optimum load current of approximately 90 amperes; corresponding to a current density through the boat of ∼ 4 × 104 amperes/cm2.

Download Full-text

Rapid Freezing of Freeze-Etch Specimens

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s1431927600003275 ◽

1980 ◽

Vol 38 ◽

pp. 752-755

Author(s):

A. Elgsaeter ◽

T. Espevik ◽

G. Kopstad

Keyword(s):

Low Temperature ◽

Metal Surface ◽

Relative Velocity ◽

Thermal Contact ◽

High Rate ◽

Rapid Freezing ◽

Temperature Decrease ◽

Freeze Etching

The importance of a high rate of temperature decrease (“rapid freezing”) when freezing specimens for freeze-etching has long been recognized1. The two basic methods for achieving rapid freezing are: 1) dropping the specimen onto a metal surface at low temperature, 2) bringing the specimen instantaneously into thermal contact with a liquid at low temperature and subsequently maintaining a high relative velocity between the liquid and the specimen. Over the last couple of years the first method has received strong renewed interest, particularily as the result of a series of important studies by Heuser and coworkers 2,3. In this paper we will compare these two freezing methods theoretically and experimentally.

Download Full-text