scholarly journals Fuel Cell designing with optimal high speed air compressor

2021 ◽  
pp. 29-38
Author(s):  
Nabeel Ahsan ◽  
Mahrukh Mehmood ◽  
Asad A. Zaidi
Keyword(s):  
Fuel Cell ◽  
High Speed ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Air Compressor ◽  
Different Types ◽  
Input Parameters ◽  
Turbo Compressor

This paper discusses different air management technologies for fuel cell systems. Two different types of compressors are analyzed for Proton-exchange membrane fuel cells (PEMFC). Some important criteria are analyzed thoroughly for the selection of turbo compressor among different types of compressors illustrated with the help of matrix representations. The impacts of various input parameters for Fuel Cell (FC) are also explained thoroughly. Later the numerical modeling of an automobile fuel cell system using a high speed turbo-compressor for air supply is explained. The numerical model incorporates the important input parameters related with air and hydrogen. It also performed energy and mass balances across different components such as pump, fan, heat-exchanger, air compressor and also keeps in consideration the pressure drop across the flow pipes and various mechanical parts. The model is solved to obtain the characteristics of the FC system at different operating conditions. Therefore, it can be concluded that the high speed turbo compressor with a turbo-expander can have significant effects on the overall system power and efficiency.

Theoretical Analysis on the Autothermal Reforming Process of Ethanol as Fuel for a Proton Exchange Membrane Fuel Cell System

2006 ◽  
Vol 4 (4) ◽  
pp. 468-473 ◽  
Author(s):  
Alessandra Perna
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cell ◽  
Cell System ◽  
Autothermal Reforming ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Hydrogen Yield ◽  
Fuel Cell System ◽  
Exchange Membrane

The purpose of this work is to investigate, by a thermodynamic analysis, the effects of the process variables on the performance of an autothermal reforming (ATR)-based fuel processor, operating on ethanol as fuel, integrated into an overall proton exchange membrane (PEM) fuel cell system. This analysis has been carried out finding the better operating conditions to maximize hydrogen yield and to minimize CO carbon monoxide production. In order to evaluate the overall efficiency of the system, PEM fuel cell operations have been analyzed by an available parametric model.

Proton Exchange Membrane (PEM) Fuel Cell System Model for Automotive Vehicle Simulation and Control

2001 ◽  
Author(s):  
Daisie D. Boettner ◽  
Gino Paganelli ◽  
Yann G. Guezennec ◽  
Giorgio Rizzoni ◽  
Michael J. Moran
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cell ◽  
Cell System ◽  
Proton Exchange ◽  
System Model ◽  
System Efficiency ◽  
Fuel Cell System ◽  
Air Compressor ◽  
Exchange Membrane

Abstract This paper describes a Proton Exchange Membrane (PEM) fuel cell system model for automotive applications that includes an air compressor, cooling system, and other auxiliaries. The fuel cell system model has been integrated into a vehicle performance simulator that determines fuel economy and allows consideration of control strategies. Significant fuel cell system efficiency improvements may be possible through control of the air compressor and other auxiliaries. Fuel cell system efficiency results are presented for two limiting air compressor cases: ideal control and no control. Extension of the present analysis to hybrid configurations consisting of a fuel cell system and battery is currently under study.

Transient Analysis of PEM Fuel Cell for Hybrid Vehicle Application

2005 ◽  
Author(s):  
Ivan Arsie ◽  
Alfonso Di Domenico ◽  
Cesare Pianese ◽  
Marco Sorrentino
Keyword(s):  
Control System ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Hybrid Vehicle ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
State Variables ◽  
Accurate Analysis ◽  
Energy Flows

The paper focuses on the simulation of a hybrid vehicle with proton exchange membrane fuel cell as the main energy conversion system. A modeling structure has been developed to perform accurate analysis for powertrain and control system design. The models simulate the dynamics of the main powertrain elements and fuel cell system to give a sufficient description of the complex interaction between each component under real operating conditions. A control system based on a multi-level scheme has also been introduced and the complexity of control issues for hybrid powertrains have been discussed. Such a study has been performed to analyze the energy flows among the powertrain components. The results highlight that optimizing these systems is not a trivial task and the use of precise models can improve the powertrain development process. Furthermore, the behavior of system state variables and the influence of control actions on fuel cell operation have also been analyzed. Particularly, the effects of the introduction of a rate limiter on the stack power have been investigated, evidencing that a 2 kW/s rate limiter increased the system efficiency by 10% while reducing the dynamic performances of the powertrain in terms of speed error (i.e. 25 %).

scholarly journals Measurements Based Analysis of the Proton Exchange Membrane Fuel Cell Operation in Transient State and Power of Own Needs

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 498
Author(s):  
Andrzej Wilk ◽  
Daniel Węcel
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Transient State ◽  
Experimental Tests ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Variable Load ◽  
Exchange Membrane

Currently, fuel cells are increasingly used in industrial installations, means of transport, and household applications as a source of electricity and heat. The paper presents the results of experimental tests of a Proton Exchange Membrane Fuel Cell (PEMFC) at variable load, which characterizes the cell’s operation in real installations. A detailed analysis of the power needed for operation fuel cell auxiliary devices (own needs power) was carried out. An analysis of net and gross efficiency was carried out in various operating conditions of the device. The measurements made show changes in the performance of the fuel cell during step changing or smooth changing of an electric load. Load was carried out as a change in the current or a change in the resistance of the receiver. The analysis covered the times of reaching steady states and the efficiency of the fuel cell system taking into account auxiliary devices. In the final part of the article, an analysis was made of the influence of the fuel cell duration of use on obtained parameters. The analysis of the measurement results will allow determination of the possibility of using fuel cells in installations with a rapidly changing load profile and indicate possible solutions to improve the performance of the installation.

scholarly journals Analysis of Membranless Formic Acid Fuel Cell using E-Shaped Microfluidic Channel

2019 ◽  
Vol 31 (11) ◽  
pp. 2497-2502
Author(s):  
M. Elumalai ◽  
M. Raja ◽  
A. Rajasekaran ◽  
B. Chinnaraja
Keyword(s):  
Fuel Cell ◽  
Formic Acid ◽  
Proton Exchange Membrane ◽  
Microfluidic Channel ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Alkaline Media ◽  
Fuel Cell Performance ◽  
Membraneless Fuel Cell

A microfluidic fuel cell has been fabricated using formic acid in an alkaline media as the fuel and sodium percarbonate in acidic media as the oxidant. Various operating conditions and different cell dimensions were applied to evaluate the fuel cell performance. The laminar flow-based membraneless fuel cell was found to reach a maximum power density of 23.60 mW cm-2 using 1.50 M HCOOH in 3 M NaOH solution as the fuel and 0.15 M percarbonate in 1.50 M H2SO4 solution as the oxidant at room temperature. The fuel cell system has no proton exchange membrane. This simple membraneless fuel cell with a planar structure has a high design flexibility, which enables its easy integration into actual microfluidic systems and miniature power applications.

Proton Exchange Membrane Fuel Cell System Model for Automotive Vehicle Simulation and Control

2002 ◽  
Vol 124 (1) ◽  
pp. 20-27 ◽  
Author(s):  
Daisie D. Boettner ◽  
Gino Paganelli ◽  
Yann G. Guezennec ◽  
Giorgio Rizzoni ◽  
Michael J. Moran
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
System Model ◽  
System Efficiency ◽  
Fuel Cell System ◽  
Air Compressor ◽  
Vehicle Simulation ◽  
Exchange Membrane

This paper describes a proton exchange membrane (PEM) fuel cell system model for automotive applications that includes an air compressor, cooling system, and other auxiliaries. The fuel cell system model has been integrated into a vehicle performance simulator that determines fuel economy and allows consideration of control strategies. Significant fuel cell system efficiency improvements may be possible through control of the air compressor and other auxiliaries. Fuel cell system efficiency results are presented for two limiting air compressor cases: ideal control and no control. Extension of the present analysis to hybrid configurations consisting of a fuel cell system and battery is currently under study.

Modeling and Analysis of Transient Behavior of Polymer Electrolyte Membrane Fuel Cell Hybrid Vehicles

2006 ◽  
Vol 4 (3) ◽  
pp. 261-271 ◽  
Author(s):  
Ivan Arsie ◽  
Alfonso Di Domenico ◽  
Cesare Pianese ◽  
Marco Sorrentino
Keyword(s):  
Control System ◽  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Dynamic Performance ◽  
Transient Behavior ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
State Variables ◽  
Accurate Analysis

The paper focuses on the simulation of a hybrid vehicle with proton exchange membrane fuel cell as the main energy conversion system. A modeling structure has been developed to perform accurate analysis for powertrain and control system design. The models simulate the dynamics of the main powertrain elements and fuel cell system to give a sufficient description of the complex interaction between each component under real operating conditions. A control system based on a multilevel scheme has also been introduced and the complexity of control issues for hybrid powertrains have been discussed. This study has been performed to analyze the energy flows among powertrain components. The results highlight that optimizing these systems is not a trivial task and the use of precise models can improve the powertrain development process. Furthermore, the behavior of system state variables and the influence of control actions on fuel cell operation have also been analyzed. In particular, the effect of introducing a rate limiter on the stack power has been investigated, evidencing that a 2kW∕s rate limiter increased the system efficiency by 10% while reducing the dynamic performance of the powertrain in terms of speed error.

Computational Analysis of Heat Transfer in Air-Cooled Fuel Cells

2011 ◽  
Author(s):  
S. Shahsavari ◽  
M. Bahrami ◽  
E. Kjeang
Keyword(s):  
Heat Transfer ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Temperature Distribution ◽  
Proton Exchange Membrane ◽  
Gas Diffusion ◽  
Cell System ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Heat Management

Temperature distribution in a fuel cell significantly affects the performance and efficiency of the fuel cell system. Particularly, in low temperature fuel cells, improvement of the system requires addressing the heat management issues, which reveals the importance of developing thermal models. In this study, a 3D numerical thermal model is presented to analyze heat transfer and predict the temperature distribution in air-cooled proton exchange membrane fuel cells (PEMFC). In the modeled fuel cell stack, forced air flow supplies oxidant as well as cooling. Conservation equations of mass, momentum, and energy are solved in the oxidant channel, whereas energy equation is solved in the entire domain, including the gas diffusion layers (GDLs) and separator plates, which play a significant role in heat transfer. A parametric study is done to investigate the effect of various operating conditions on maximum cell temperature. The results are further validated with experiment. This model provides a theoretical foundation for thermal analysis of air-cooled stacks, where temperature non-uniformity is high and thermal management and stack cooling is a significant engineering challenge.

Thermodynamic, exergetic, and thermoeconomic analyses of a 1-kW proton exchange membrane fuel cell system fueled by natural gas

Energy ◽  
2020 ◽  
pp. 119362
Author(s):  
Seok-Ho Seo ◽  
Si-Doek Oh ◽  
Jinwon Park ◽  
Hwanyeong Oh ◽  
Yoon-Young Choi ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Natural Gas ◽  
Proton Exchange Membrane ◽  
Cell System ◽  
Proton Exchange ◽  
Fuel Cell System ◽  
Exchange Membrane
Sign in / Sign up

Export Citation Format

Share Document