Relationships between grain physicochemical characteristics and flour particle size distribution for Taiwan rice cultivars

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
J.-J. Chen ◽  
C.-Y. Lii ◽  
S. Lu
2020 ◽  
Vol 24 (4) ◽  
pp. 729-734
Author(s):  
S.A. Uzoekwe ◽  
U.L. Anekwe

Most household and some industrial solid wastes end up in the landfill which is the commonest means of solid waste management in many parts of Baylesa state, Nigeria. This study assessed the physicochemical characteristics, particle size distribution and total hydrocarbon content in soil samples from abandoned landfill site in Igbogene, Bayelsa state, Nigeria by collecting samples from varying distances (50m, 100m and 150m) at a depth of 0-20cm and analyzed using standard methods. Results were in the range of 5.01 – 5.34 (pH), 0.73 – 0.98 meg/100g (Exchangeable Acidity), 2.45 – 3.48 meg/100g (sodium), 0.19 – 0.31 meg/100g (potassium), 3.94 – 5.33 meg/100g (calcium), 1.52 – 2.15 meg/100g (magnesium), 9.57 – 11.49 mg/kg (nitrate), 4.18 – 5.19 mg/kg (sulphate), 6.99 – 8.85 mg/kg (available phosphorus), 8.23 – 12.60 mg/kg (total hydrocarbon content), 76.48 – 100.25 mg/kg (chloride), 5.14 – 7.59 mg/kg (ammonium), 8.83 – 8.95% (clay), 2.70 – 3.10% (silt), 87.93 – 88.35% (sand), 2.62 – 3.58% (organic carbon), 4.51 – 6.16% (organic matter) and 0.22 – 0.33% (total nitrogen). Analysis of variance (ANOVA) showed no significant deviations (p>0.05) across the various distances for all parameters except for organic carbon and matter, total nitrogen, potassium and ammonium. In addition, most of the  nutrients showed positive significant relationship at p<0.05. This suggests that at large the activities of old landfill in the study area is not influencing the soil characteristics under study. Rather the apparent decline in value away from old landfill may be due to mobility level of minerals in the soil toward the southwest direction, which the cluster analysis clearly showed. Keywords: Physicochemical Properties, Environmental Contamination, Hydrocarbon Content, Landfill


2020 ◽  
Vol 12 (2) ◽  
pp. 137-146
Author(s):  
Gannimitta Arvind ◽  
Srinivas Prathima ◽  
Atla Venkateshwar Reddy

The main intention of this work was to study the effect of process variables on the particle size distribution of paclitaxel nanocrystals. Paclitaxel nanocrystals were prepared by using anti-solvent precipitation method. Box Behnken design was used to optimize the process parameters including the Ratio (v/v) of two phases (A), Ulatrasonication time in min (B) and Surfactant concentration (%w/v) (C). A response surface methodology comprising 17 runs was carried out to optimize the nanocrystal formulation of paclitaxel. Two dependent variables particle size and polydispersity index (PDI) were identified as responses. Polynomial equations and response surface curves were used to relate the dependent and independent variables. The optimization model predicted a mean particle size of 147.653 nm and PDI of 0.1706 with A, B and C levels of 5, 15 min and 0.03% w/v respectively. The observed values were in close agreement with the predicted values. The optimized batches of nanocrystals were analyzed by FTIR, DSC and XRPD techniques. The optimized batch revealed irregular morphology as assessed by transmission electron microscopy and was crystalline as determined by thermal analysis and XRPD studies. Paclitaxel nanocrystals exhibited a considerable increase in solubility as well as dissolution rate in comparison with the pure drug. The present work thoroughly explored the influence of process parameters on the physicochemical characteristics of the produced drug nanocrystals.


2020 ◽  
Vol 69 (4) ◽  
pp. 102-106
Author(s):  
Shota Ohki ◽  
Shingo Mineta ◽  
Mamoru Mizunuma ◽  
Soichi Oka ◽  
Masayuki Tsuda

1995 ◽  
Vol 5 (1) ◽  
pp. 75-87 ◽  
Author(s):  
Christine M. Woodall ◽  
James E. Peters ◽  
Richard O. Buckius

1998 ◽  
Vol 84 (5) ◽  
pp. 387-392 ◽  
Author(s):  
Takashi INOUE ◽  
Yuzo HOSOI ◽  
Koe NAKAJIMA ◽  
Hiroyuki TAKENAKA ◽  
Tomonori HANYUDA

2020 ◽  
Vol 86 (1) ◽  
pp. 32-37
Author(s):  
Valeria A. Brodskaya ◽  
Oksana A. Molkova ◽  
Kira B. Zhogova ◽  
Inga V. Astakhova

Powder materials are widely used in the manufacture of electrochemical elements of thermal chemical sources of current. Electrochemical behavior of the powders depends on the shape and size of their particles. The results of the study of the microstructure and particles of the powders of vanadium (III), (V) oxides and lithium aluminate obtained by transmission electron and atomic force microscopy, X-ray diffraction and gas adsorption analyses are presented. It is found that the sizes of vanadium (III) and vanadium (V) oxide particles range within 70 – 600 and 40 – 350 nm, respectively. The size of the coherent-scattering regions of the vanadium oxide particles lies in the lower range limit which can be attributed to small size of the structural elements (crystallites). An average volumetric-surface diameter calculated on the basis of the surface specific area is close to the upper range limit which can be explained by the partial agglomeration of the powder particles. Unlike the vanadium oxide particles, the range of the particle size distribution of the lithium aluminate powder is narrower — 50 – 110 nm. The values of crystallite sizes are close to the maximum of the particle size distribution. Microstructural analysis showed that the particles in the samples of vanadium oxides have a rounded (V2O3) or elongated (V2O5) shape; whereas the particles of lithium aluminate powder exhibit lamellar structure. At the same time, for different batches of the same material, the particle size distribution is similar, which indicates the reproducibility of the technologies for their manufacture. The data obtained can be used to control the constancy of the particle size distribution of powder materials.


Sign in / Sign up

Export Citation Format

Share Document