scholarly journals Mandibular Canal Location and Cortical Bone Thickness in Males and Females of Different Age Groups: A Cone-beam Computed Tomography Study

2021 ◽  
Vol 9 (A) ◽  
pp. 1117-1122
Author(s):  
Sherif Shafik El-Bahnasy ◽  
Magdy Youakim ◽  
Mohamed Shamel ◽  
Hisham El Sheikh
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Mandibular Canal ◽  
Cone Beam ◽  
Age Group ◽  
Bone Thickness ◽  
Significant Difference ◽  
Computed Tomography Scans ◽  
The Mean

AIM: The purpose of the study was to measure and compare the prevalence of mandibular canal (MC) location variations in regard to mandibular first molars in both genders at different age groups. METHODS: A retrospective study was performed on 80 cone-beam computed tomography scans. Distance between MC and apical apices of first molars, buccal and lingual cortical plates was measured in both sides. RESULTS: 80 scans with 160 sides were analyzed. Distances was measured bilaterally for all scans with mean (5.22 ± 0.77) in men versus (4.1 ± 0.7) in women at group age 31–40 apical to apices of first molars. The mean was (3.77 ± 0.62) in men versus (2.81 ± 0.47) in women at same age group at buccal side, lingually the mean was (4.02 ± 0.67) in men versus (3.67 ± 0.26) in women in the same age group. CONCLUSION: Our study showed that there were decrease in measurements in older age group in both genders and in female groups more than male groups but with no statistical significant difference.

scholarly journals Mandibular Buccal Bone Thickness In Southeastern Anatolian People: A Cone-Beam Computed Tomography Study

2017 ◽  
Vol 7 (1) ◽  
pp. 6 ◽  
Author(s):  
Ceren Aktuna Belgin ◽  
Ozkan Adiguzel ◽  
Marius Bud ◽  
Mehmet Colak ◽  
Zeki Akkus
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Age Groups ◽  
Cone Beam ◽  
Bone Thickness ◽  
Posterior Teeth ◽  
Second Molar ◽  
Significant Difference ◽  
Molar Teeth ◽  
The Difference

Aim: Buccal bone thickness is an important factor in implant treatment, bone health after tooth extraction, apical surgery, and esthetic outcomes. We evaluated the distance from the mandibular premolar and molar teeth apices to the buccal cortical bone in southeastern Anatolian people using cone-beam computed tomography (CBCT). Methodology: This retrospective study was performed in 461 posterior teeth (220 premolars, 241 molars) of 133 patients (62 females, 64 males) at Dicle University, Faculty of Dentistry, Department of Oral and Maxillofacial Radiology. Data were analyzed using Student’s t-tests and Tukey HSD tests. Results: The mandibular buccal bone was thicker in men than in women, but the difference was not statistically significant (p>0.05). The thinnest point of the mandibular buccal bone was measured in women as 2.431 mm and in men as 2.491 mm in the first premolar teeth. The thickest point of the mandibular bone was measured in women as 7.940 mm and in men as 7.859 mm in the distal roots of mandibular second molar teeth. For the mandibular first and second premolars, there was no significant difference in buccal bone thickness among the 10–29-, 30–49-, and 50–69-year age groups. The difference between the first and second molar mesial and distal roots of the age groups was significant at the level of buccal root thickness (p<0.05). Conclusions: It is important to examine buccal bone thickness (with CBCT) before surgical dental procedures for appropriate implant planning and surgical endodontic treatment.  How to cite this article: Aktuna Belgin C, Adiguzel O, Bud M, Colak M, Akkus Z. Mandibular Buccal Bone Thickness In Southeastern Anatolian People: A Cone-Beam Computed Tomography Study. Int Dent Res 2017;7:6-12. Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals Height difference between the vestibular and palatal walls and palatal width: a cone beam computed tomography approach

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
P. López-Jarana ◽  
C. M. Díaz-Castro ◽  
A. Falcão ◽  
C. Falcão ◽  
J. V. Ríos-Santos ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Bone Thickness ◽  
Height Difference ◽  
Mean Values ◽  
The Mean ◽  
Maxilla And Mandible ◽  
Palatal Bone ◽  
Two Parameters

Abstract Background The objective of this study was to measure two parameters involved in tri-dimensional implant planning: the position of the buccal and palatal bone wall and the palatal thickness. Methods Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The height difference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. Results The mean values in the maxilla were 1.7 ± 0.9 mm for central and lateral incisors, 2.2 ± 1.7 mm for canines, 1.6 ± 0.9 mm for premolars and 1.9 ± 1.5 mm for molars. In the lower jaw, the mean values were 1.3 ± 0.8 mm for incisors, 1.7 ± 1.2 mm for canines, 2.3 ± 1.3 mm for premolars, and 2.6 ± 1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height differences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. Conclusions The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and mandible, except in the upper canines and premolars and the lower molars.

scholarly journals Comparison of the Hounsfield Unit Values Obtained From Cone-Beam Computed Tomography (CBCT) and Multidetector Computed Tomography (MDCT) Images for Different Bone Densities

2021 ◽  
Vol 7 (2) ◽  
Author(s):  
Atefeh Khavid ◽  
Mojgan Sametzadeh ◽  
Mostafa Godiny ◽  
Mohammad Mehdi Moarrefpour
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Pearson Correlation ◽  
Hounsfield Unit ◽  
Cone Beam ◽  
Ct Scanner ◽  
Significance Level ◽  
Dental Practitioners ◽  
Significant Difference ◽  
The Mean

Background and objective: In recent years, cone-beam computed tomography (CBCT) has become a key diagnostic tool in dentistry. CBCT can provide 3D images of the maxillofacial area to help dental practitioners in diagnosis and treatment, especially implant placement and treatment of pathogenic lesions. This study aimed to compare the Hounsfield Unit (HU) values obtained from CBCT images for bones of different densities with the corresponding HU values from MDCT images. Materials and methods: cube-shaped bone blocks of identical size were cut from the middle section of the cow ribs and femur area such that they had a layer of cortical bone in their buccal, lingual, and top surfaces and trabecular bone in the middle. MDCT scans were performed using a Somatom Sensation Ct Scanner. After determining HU from the results of these scans, nine suitable specimens from different ranges of HU were chosen for comparison. HU of the CBCT images was computed by the dedicated software of the CBCT machine. Finally, HU values obtained from MDCT and CBCT were compared. Data analysis was performed using SPSS version 25 at the 0.05 significance level. Results: The results showed a statistically significant difference between the mean HU from MDCT images and the mean HU from CBCT images (P<0.05). For similar specimens, CBCT produced higher mean HU values than MDCT. The Pearson correlation test detected a significant direct relationship between the HU values of specimens in MDCT and CBCT (P<0.05). Conclusion: For the tools and software used in this study, there was no significant difference between the HU values obtained from MDCT and CBCT, but the mean HU obtained from CBCT was higher than that from MDCT.

scholarly journals Comparison of Imaging Softwares for Upper Airway Evaluation: Preliminary Study

2018 ◽  
Vol 11 (4) ◽  
pp. 273-277
Author(s):  
Guilherme dos Santos Trento ◽  
Lucas Borin Moura ◽  
Rubens Spin-Neto ◽  
Philipp Christian Jürgens ◽  
Marisa Aparecida Cabrini Gabrielli ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Digital Imaging ◽  
Upper Airway ◽  
Cone Beam ◽  
Maxillary Expansion ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Computed Tomography Scans ◽  
The Mean ◽  
Preliminary Study

The interest about upper airway evaluation has increased lately. Therefore, many softwares have been developed aiming to improve and facilitate the analysis of airway volume. The objective of this study was to compare two different softwares packages, Mimics and Dolphin, in their accuracy and precision in upper airway space measurements. Preoperative cone beam computed tomography scans of nine nonsyndromic patients submitted to surgically assisted rapid maxillary expansion were included in this study. The imaging exams were converted to DICOM (digital imaging and communications in medicine) files and imported to the softwares. The mean volume for the Dolphin group (G1) was 10.791 cm3 (SD = 4.269 cm3) and for the Mimics group (G2) was 10.553 cm3 (SD = 4.564 cm3). There was no statistically significant difference between the two groups ( p = 0.105).

scholarly journals Dosimetry of Critical Organs in Maxillofacial Imaging with Cone-beam Computed Tomography

2019 ◽  
Vol 9 (1Feb) ◽  
Author(s):  
R Ghanbarnezhad Farshi ◽  
A Mesbahi ◽  
M Johari ◽  
Ü Kara ◽  
N Gharehaghaji
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Radiation Doses ◽  
Parotid Glands ◽  
Thermoluminescent Dosimeters ◽  
Wide Range ◽  
Significant Difference ◽  
The Mean ◽  
Selection Of

Background: While the benefits of cone-beam computed tomography (CBCT) are well known in maxillofacial imaging, the use of this modality is not risk-free.Objective: The aim of this study was to evaluate the exposure doses received by patients during maxillofacial imaging with CBCT.Methods: Entrance surface dose (ESD) was measured by using thermoluminescent dosimeters (TLDs) attached to the eyes lids, parotid glands and thyroid of 64 patients in two imaging centers (A and B). Phantom dosimetry was performed by a cylindrical poly-methyl methacrylate (PMMA) head-size phantom and an ionization chamber for different exposure parameters. NewTom VGi and Planmeca Promax 3D CBCT scanners were used at centers A and B, respectively.Results: The mean ESD of the eyes, parotid glands and thyroid were 2.57, 2.33 and 0.28 mGy in center A, 0.35, 2.11 and 0.37 mGy in center B, respectively. ESD of the eyes revealed a significant difference in two centers; in center B, it was 86.4% lower than center A. In the phantom dosimetry, the measured doses of NewTom VGi were 2.63 and 2.08 mGy, respectively by changing field of view (FOV) size from 8×8 cm2 (height × diameter) to 6×6 cm2. For Planmeca Promax 3D, it ranged from 0.98 to 3.24 mGy depending on exposure parameters.Conclusion: There is a wide range of radiation doses dependent on the units, patients and selected scan parameters. Inappropriate selection of exposure settings, especially FOV size, can seriously increase patient dose.

scholarly journals Assessment of Labial Alveolar Bone Thickness in Maxillary Central Incisor using Cone Beam Computed Tomography

2021 ◽  
Vol 5 (1) ◽  
pp. 2-6
Author(s):  
Shaili Pradhan ◽  
Rejina Shrestha ◽  
Ranjita Shrestha Gorkhali ◽  
Pramod Kumar Koirala
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Alveolar Bone ◽  
Cone Beam ◽  
Central Incisor ◽  
Bone Thickness ◽  
Cross Sectional ◽  
Dental Surgery ◽  
Maxillary Central Incisor ◽  
Significant Difference

Introduction: The maxillary anterior region is becoming a major concern due to its aesthetic relevance. The buccal bone thickness is important for implant placement, orthodontic treatment and restorative treatment. Objective: To assess the thickness of alveolar bone in the maxillary central incisor using cone beam computed tomography (CBCT). Methods: A cross-sectional observational study was conducted at Department of Dental Surgery, Bir Hospital where CBCT of 53 samples from July 2019 till December 2019, the archived CBCT images was assessed retrospectively. The thickness of the labial bone in a direction perpendicular to the outer surface of the tooth root was measured at a distance of 2 mm from the cementoenamel junction (CEJ). The measurement was taken thrice and the mean measurement was considered. Results: The labial alveolar bone thickness in maxillary central incisor was found to be 0.55±0.27 mm at a distance of 2 mm from the CEJ. Only 2 (3.8%) of the samples had an alveolar thickness of >1 mm. No statistically significant difference was found with respect to gender and age. Conclusion: The average thickness of the labial alveolar bone in maxillary central incisor using cone beam computed tomography was found to be thin. 

scholarly journals Palatal bone thickness at the implantation area of maxillary skeletal expander in adult patients with skeletal Class III malocclusion: a cone-beam computed tomography study

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Weiting Chen ◽  
Kaili Zhang ◽  
Dongxu Liu
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Adult Patients ◽  
Cone Beam ◽  
Class Iii ◽  
Class Iii Malocclusion ◽  
Bone Thickness ◽  
Skeletal Class ◽  
Significant Difference ◽  
Palatal Bone

Abstract Background Maxillary skeletal expanders (MSE) is effective for the treatment of maxillary transverse deformity. The purpose of the study was to analyse the palatal bone thickness in the of MSE implantation in patients with skeletal class III malocclusion. Methods A total of 80 adult patients (40 males, 40 females) with an average angle before treatment were divided into two groups, the skeletal class III malocclusion group and the skeletal I malocclusion group, based on sagittal facial type. Each group consisted of 40 patients, with a male to female ratio of 1:1. A cone-beam computed tomography scanner was employed to obtain DICOM data for all patients. The palatal bone thickness was measured at 45 sites with MIMICS 21.0 software, and SPSS 22.0 software was employed for statistical analysis. The bone thickness at different regions of the palate in the same group was analysed with one-way repeated measures ANOVA. Fisher’s least significant difference-t method was used for the comparison of pairs, and independent sample t test was employed to determine the significance of differences in the bone thickness at the same sites between the two groups. Results Palatal bone thickness was greater in the middle region of the midline area (P < 0.01), while the thickness in the middle and lateral areas in both groups was generally lower (P < 0.001). The bone in the anterior, middle, and posterior regions of the two groups became increasingly thin from the middle area toward the parapalatine region. The palatal bone was significantly thinner in the area 9.0 mm before the transverse palatine suture in the midline area, 9.0 mm before and after the transverse palatine suture in the middle area, and 9.0 mm after the transverse palatine suture in the lateral area. Conclusion The palatal bone was thinner in patients with class III malocclusion than in patients with class I malocclusion, with significant differences in some areas. The differences in bone thickness should be considered when MSE miniscrews are implanted. The anterior and middle palatal areas are safer for the implantation of miniscrews, while the thinness of the posterior palatal bone increases the risk of the miniscrews falling off and perforating.

scholarly journals Estimating the Entrance Surface Dose in the Eyes, Thyroid, and Parotid Gland Regions in Adult and Pediatric Groups: A Cone-Beam Computed Tomography Technique

2021 ◽  
Author(s):  
Reza Omidi ◽  
Fariba Farhadi Birgani ◽  
Ali Asghar Parach ◽  
Hamed Zamani ◽  
Saman Dalvand ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Parotid Gland ◽  
Cone Beam Computed Tomography ◽  
Pediatric Patients ◽  
Age Groups ◽  
Cone Beam ◽  
Surface Dose ◽  
Parotid Glands ◽  
Entrance Surface Dose ◽  
Significant Difference

Purpose: This study aimed to determine the Entrance Surface Dose (ESD) of sensitive organs in Cone-Beam Computed Tomography (CBCT) imaging of the maxillofacial region in the two age groups of adult and pediatric. Materials and Methods: In this work, the measurements were performed using Thermo Luminescent Dosimeters (TLD-GR200). The imaging was performed using a PROMAX 3D CBCT scanner for 30 adults and 20 pediatric patients. The ESD value for each patient in the region of eyes, thyroid, and parotid glands was measured by 15 TLDs during CBCT of maxillofacial. Results: The highest and lowest mean values of ESDs were related to the parotid and thyroid gland regions in adults, 4.77 ± 0.61 mGy and 0.37 ± 0.16 mGy, respectively. In addition, these values were obtained 2.97 ± 0.36 mGy and 0.35 ± 0.12 mGy in pediatric groups as the highest and lowest values in that order. The results showed that the ESD values of the parotid gland regions in maxilla and mandible examinations had a significant difference (P <0.05). In addition, there was a significant difference between the ESD values of the parotid gland regions among the adults and pediatric groups (P <0.05). Conclusion: According to the results, the ESD values in both age groups were higher in the parotid gland region during maxillofacial CBCT examinations. Therefore, it is recommended to set radiation parameters like mAs as low as possible for reducing the patient dose, especially pediatric patients due to the more sensitive organs.

scholarly journals Association between Cone-Beam Computed Tomography and Histological and Immunohistochemical Features in Periapical Lesions Correlated with Thickened Maxillary Sinus Mucosa

Medicina ◽  
2021 ◽  
Vol 57 (8) ◽  
pp. 840
Author(s):  
Alexandra Dumitrescu ◽  
Maria-Alexandra Martu ◽  
Alexandru Nemtoi ◽  
Ana Sirghe ◽  
Liliana Chelaru ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Maxillary Sinus ◽  
B Lymphocytes ◽  
Cone Beam Computed Tomography ◽  
Maxillary Sinusitis ◽  
Cone Beam ◽  
Periapical Lesions ◽  
Significant Difference ◽  
The Mean ◽  
Sinus Mucosa

Background and Objectives: Odontogenic sinusitis is a frequently underestimated pathology with fewer symptoms in patients with periapical lesions, periodontal disease, or iatrogenic foreign bodies in the maxillary sinus. The aim of our study was to determine the correlation between maxillary sinusitis and periapical lesions using cone-beam computed tomography (CBCT) imaging and histological and immunohistochemical investigations. Materials and Methods: A total of 1450 initial patients diagnosed with maxillary sinusitis in the Ear-Nose-Throat (ENT) Department, University of Medicine and Pharmacy “Grigore T. Popa” Iasi, Romania, were treated with anti-inflammatory drugs. Of these, 629 still had unresolved symptomatology and were later referred to the Dental Medicine departments for further investigations. Only 50 subjects with periapical lesions in the premolar/molar maxillary area were included in the present study. All the periapical lesions were observed on CBCT and classified using the Periapical Status Index (PSI) and the mean maxillary sinus mucosa thicknesses (MSMT). The enrolled patients underwent surgical procedures with the excision of periapical lesions. The excised samples were submitted to the histological and immunohistochemical investigations. Results: The 50 patients presented periapical lesions of their maxillary teeth in 328 dental units. There was a higher prevalence of periapical lesions in men than in women (chi-square test). We observed a significant difference between the mean MSMT of individuals with periapical lesions compared to those without (p < 0.01). Mean MSMT was 1.23 mm for teeth without periapical lesions and 3.95 mm for teeth with periapical lesions. The histopathological study identified 50% cases with periapical granulomas, 10% cases with periapical granulomas with cystic potential, and 40% cases as periapical cysts. Immunohistochemical stainings showed that CD4+ helper and CD8+ cytotoxic T lymphocytes, along with CD20+ B lymphocytes and CD68+ macrophages, were diffusely distributed in all periapical cysts and in some periapical granulomas, but CD79α+ plasma cells characterized especially periapical granulomas. Conclusions: The current study observed a significant correlation between CBCT maxillary mucosa thickness and type of periapical lesion. Chronic inflammatory lympho-histiocytic infiltrate predominates in periapical lesions, supporting the idea that lesion progression is determined by a humoral-type (CD20+ and CD79α+ B lymphocytes) but also by a cellular-type (CD4+ and CD8+ T lymphocyte population) immune mechanism.

Evaluation of the Accessory Mental Foramen in a Pediatric Population Using Cone-Beam Computed Tomography

2014 ◽  
Vol 39 (1) ◽  
pp. 85-89 ◽  
Author(s):  
K Cantekin ◽  
AE Şekerci
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Pediatric Population ◽  
Mental Foramen ◽  
Cone Beam ◽  
Turkish Children ◽  
Accessory Mental Foramen ◽  
Significant Difference ◽  
The Mean ◽  
The University

Objective: The aim of the present study was to clarify the occurrence, diameter, and location of the accessory mental foramen (AMF) using cone-beam computed tomography (CBCT) images from a sample of Turkish children. Study design: This retrospective was carried out using a total of 275 CBCT images from child and adolescent patients were randomly selected from existing records in the Department of Oral and Maxillofacial Radiology at the University of Erciyes, Kayseri, Turkey. The mental foramen (MF) and AMF were assessed on axial, sagittal, and coronal CBCT slices. Results: The mean age was 10.51 ± 3.32 years, consisting of 139 males (mean age 10.64 ± 3.42) and 126 females (mean age 10.38 ± 3.18). Twenty-one AMFs were observed in 18 of 275 patients (6.5%, 10 boys and eight girls). There was no significant difference in gender in relation to the prevalence of AMF (p = 0.65). The mean area of the 21 AMFs and the MF on the side with the AMF were 0.7 mm2 (SD ± 0.5) and 3.8 mm2 (SD ± 2.2), respectively. Conclusion: It is important to stress that detecting the AMN using CBCT with 3D reconstructions may reduce the risk of paralysis, hemorrhage, and postoperative pain in this region. Our study presents the first report assessing the occurrence, diameter, and location of the AMF in the pediatric population using CBCT images. In this respect, not surprisingly, the mean size of the AMF of our population is smaller than other reports in the literature that involve adult populations.

Sign in / Sign up

Export Citation Format

Share Document