Spectral Characteristics of Acoustic Noise During Air Filtration in Highly Permeable Porous Samples

Author(s):  
E. Marfin ◽  
A. Abdrashitov ◽  
A. Galimzyanova
2018 ◽  
Vol 18 (5) ◽  
pp. 193-200 ◽  
Author(s):  
Jiří Přibil ◽  
Anna Přibilová ◽  
Ivan Frollo

Abstract The paper focuses on investigation of influence of the volume inserted in the scanning area of the magnetic resonance imaging (MRI) device working with a low magnetic field generated by a pair of permanent magnets on vibration and acoustic noise. In addition, its aim is to evaluate the influence of different types of used scan sequences, different settings of slice orientation and scan parameters on the energy and spectral properties of vibration and noise generated by the gradient coil system of the MRI device. Two basic measurements were performed within this work: mapping of sound pressure levels in the MRI device vicinity and parallel acquisition of vibration signals by sensors mounted on the lower and upper parts of the MRI gradient system. The paper next analyzes changes in properties of the vibration signals for the examined person lying in the scanning area compared with the situation of using only the testing phantom. Spectral characteristics of the recorded vibration signals are then analyzed statistically, and compared visually and numerically. The obtained results of the detailed analysis will be used for improvement of noise suppression algorithms applied to a speech signal recorded simultaneously with scanning of the human vocal tract for its 3D modeling.


2021 ◽  
Vol 6 (2) ◽  
pp. 20-27
Author(s):  
R. K. Yarullin ◽  
R. A. Valiullin ◽  
A. R. Yarullin ◽  
D. N. Mikhaylov ◽  
V. V. Shako ◽  
...  

The article considers the factors that affect the spectral characteristics of acoustic noise recorded in active horizontal wells during logging. Based on the results of physical experiments performed on well models, the presence of resonance phenomena in the acoustic volume of the wellbore, the influence of the location of sensor and the tool body on the measurement result under identical conditions, the need to calibrate downhole tools for bringing their characteristics to a single scale are shown.


2014 ◽  
Vol 1016 ◽  
pp. 287-291
Author(s):  
Yao Qi Feng ◽  
Jiang Yang ◽  
Guo Song Feng ◽  
Yao Wu

This paper presents the modeling and analysis method of acoustic noise levels of whole audible frequency range for Chinese Space Station (CSS) module. UsingBoundaryElementModeling(BEM), the acoustic analysis model of low frequency range for CSS module was established. The analysis model of high frequency range was created by usingStatistical EnergyAnalysis(SEA) method. Based on the established models, the acoustic noise levels in all areas of CSS module were analyzed and the results for some typical areas are provided. Finally, the acoustic contribution of noise sources according to their spectral characteristics is analyzed and the implementation of noise control methods to reduce acoustic levels in CSS module is discussed.


2006 ◽  
Vol 210 (S 1) ◽  
Author(s):  
M Lundh ◽  
A Nordell ◽  
J Bengtsson ◽  
Z Nagy ◽  
S Horsch ◽  
...  
Keyword(s):  

Author(s):  
В. В. Руденко ◽  
И. В. Калужинов ◽  
Н. А. Андрущенко

The presence in operation of many prototypes of UAVs with propeller propellers, the use of such devices at relatively low altitudes and flight speeds makes the problem of noise reduction from UAVs urgent both from the point of view of acoustic imperceptibility and ecology.The aim of the work is to determine a set of methods that help to reduce the visibility of UAVs in the acoustic range. It is shown that the main source of noise from the UAV on the ground is the power plant, which includes the engine and the propeller. The parameters of the power plants influencing the processes that determine the acoustic signature of the UAV were investigated. A comprehensive analysis of the factors affecting visibility was carried out. The power plants include two-stroke and four-stroke engines, internal combustion and two-blade propellers. The use of silencers on the exhaust of the internal combustion engine was considered. The spectral characteristics of the acoustic fields of the propeller-driven power plants for the operating sample of the UAV "Eco" were obtained. The measurements were carried out in one-third octave and 1/48 octave frequency bands under static conditions. The venue is the KhAI airfield. Note that the propellers that were part of the power plants operated at Reynolds numbers (Re0,75<2*105), which can significantly affect its aerodynamic and acoustic characteristics. It is shown that when choosing a UAV control system, one should take into account the fact that two-stroke piston engines are the dominant source in the noise of propeller-driven control systems in the absence of a hood and mufflers in the intake and exhaust tracts. The use of a four-stroke internal combustion engine significantly reduces the noise of the control system. In the general case, the position of the boundaries of the zone of acoustic visibility of a UAV at the location of the observer is determined by the ratio between the intensity of acoustic radiation perceived by the observer from the UAV and the intensity of sound corresponding to the natural acoustic background and depends on the degree of manifestation of acoustic effects accompanying the propagation of sound in a turbulent atmosphere - the refraction of sound waves. Absorption and dissipation of acoustic energy. The calculation and comparison of the UAV detection range was carried out taking into account the existing natural maskers.The results of experimental studies are presented that allow assessing the degree of acoustic signature of the UAV. A set of measures aimed at reducing the intensity of the acoustic signature of the UAV in various regions of the radiation spectrum has been determined.


2019 ◽  
pp. 105-110
Author(s):  
Mikhail Yongon Lee ◽  
Sergei V. Fedorov

The article describes the structure and the operation principle of the spectrophotometer developed on the basis of a compact rapid monochromator with one input port and two output ports and a radiometric unit where upwelling radiation radiance and sea surface irradiance channels are located. A new approach to measurements of spectral characteristics of upwelling radiation of sea based on combination of advantages of a double beam photometer with a photomultiplier and a directreading photometer with a highstability silicon photodiode for its absolute adjustment in energy units is implemented.


Sign in / Sign up

Export Citation Format

Share Document