Optimal RF Beamforming for MIMO

Author(s):  
Javad Ahmadi-Shokouh

Secondary receivers in Multiple-Input Multiple-Output (MIMO) Cognitive Radio (CR) networks combat interference from primary transmitters while equipped with whitening filters. However, when the MIMO secondary users are employing Radio Frequency (RF) beam-forming networks at the transmitter/receiver front ends to improve the MIMO transmission performance, the whitening filters cannot perform interference cancellation. In this chapter, transmit/receive optimum RF beamforming is proposed for a MIMO spatial multiplexing system. The performance of the optimally designed RF beamforming technique is evaluated over a Rician channel via computer simulations. Simulation results are assessed for different RF beamforming structures and the number of primary transmitters causing interference on the secondary receiver.

Author(s):  
V. Annapoorani ◽  
S. Sureshkumar ◽  
Srisaravanapathimurugesan ◽  
M. Manoj ◽  
K. Prabhu

The networks in future generation uses the confluence of multi-media, broadband, and broadcast services, Cognitive Radio (CR) networks are located as a preferred paradigm to bring up with spectrum functionality traumatic conditions. CRS addresses the ones troubles via dynamic spectrum access. However, the precept traumatic conditions faced through manner of manner of the CR pertain to accomplishing spectrum overall performance. At the end, spectrum overall performance improvement models based on spectrum sensing and sharing models have attracted quite a few research hobby in modern-day years, which incorporates CR mastering models, network densification architectures, and Massive Multiple Input Multiple Output (MIMO), and beamforming techniques. This paper deals with a survey of modern CR spectrum overall improvement performance models and techniques which helps ultra-high reliability with low latency communications which might be resilient to surges in web page site visitors and competition for spectrum. These models and techniques, mainly speaks about permit a big form of functionality beginning from extra superb mobiliary broadband to large-scale Internet of Things (IoT) type communications. It also provides a research correlation for many of the regular periods of a spectrum block, as well as the realistic statistics rate, the models which are used in this paper are applicable in an ultra-high frequency band. This study provides a super compare of CRs and direction for future investigations into newly identified 5G research areas, such as in business enterprise and academia.


Symmetry ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1260
Author(s):  
Hyils Sharon Magdalene Antony ◽  
Thulasimani Lakshmanan

Cognitive radio network (CRN) and non-orthogonal multiple-access (NOMA) is a significant system in the 5G wireless communication system. However, the system is an exceptional way for the cognitive users to secure a communication from the interferences in multiple-input multiple-output (MIMO)-NOMA-based cognitive radio network. In this article, a new beamforming technique is proposed to secure an information exchange within the same cells and neighboring cells from all intervened users. The interference is caused by an imperfect spectrum sensing of the secondary users (SUs). The SUs are intended to access the primary channels. At the same time, the primary user also returns to the channel before the SUs access ends. This similar way of accessing the primary channel will cause interference between the users. Thus, we predicted that the impact of interferences would be greatly reduced by the proposed technique, and that the proposed technique would maximize the entire secrecy rate in the 5G-based cognitive radio network. The simulation result provides better evidence for the performance of the proposed technique.


Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2453 ◽  
Author(s):  
Guangyong Zheng ◽  
Siqi Na ◽  
Tianyao Huang ◽  
Lulu Wang

Distributed multiple input multiple output (MIMO) radar has attracted much attention for its improved detection and estimation performance as well as enhanced electronic counter-counter measures (ECCM) ability. To protect the target from being detected and tracked by such radar, we consider a barrage jamming strategy towards a distributed MIMO. We first derive the Cramer–Rao bound (CRB) of target parameters estimation using a distributed MIMO under barrage jamming environments. We then set maximizing the CRB as the criterion for jamming resource allocation, aiming at degrading the accuracy of target parameters estimation. Due to the non-convexity of the CRB maximizing problem, particle swarm optimization is used to solve the problem. Simulation results demonstrate the advantages of the proposed strategy over traditional jamming methods.


Author(s):  
Ravisankar Malladi ◽  
Manoj Kumar Beuria ◽  
Ravi Shankar ◽  
Sudhansu Sekhar Singh

In modern wireless communication scenarios, non-orthogonal multiple access (NOMA) provides high throughput and spectral efficiency for fifth generation (5G) and beyond 5G systems. Traditional NOMA detectors are based on successive interference cancellation (SIC) techniques at both uplink and downlink NOMA transmissions. However, due to imperfect SIC, these detectors are not suitable for defense applications. In this paper, we investigate the 5G multiple-input multiple-output NOMA deep learning technique for defense applications and proposed a learning approach that investigates the communication system’s channel state information automatically and identifies the initial transmission sequences. With the use of the proposed deep neural network, the optimal solution is provided, and performance is much better than the traditional SIC-based NOMA detectors. Through simulations, the analytical outcomes are verified.


2021 ◽  
Vol 9 (3) ◽  
pp. 1-35
Author(s):  
Perambur Neelakanta ◽  
Dolores De Groff

Facilitating newer bands of ‘unused’ segments (windows) of RF spectrum falling in the mm-wave range (above 30+ GHz) and seeking usable stretches across unallocated THz spectrum, could viably be considered for Multiple Input Multiple Output (MIMO) communications. This could accommodate the growing needs of multigigabit 3G/4G applications in outdoor-based backhauls in picocellular networks and in indoor-specific multimedia networking. However, in contrast with cellular and Wi-Fi, wireless systems supporting sub-mm wavelength transreceive communications in the outdoor electromagnetic (EM) ambient could face “drastically different propagation geometry”; also, in indoor contexts, envisaging pertinent spatial-multiplexing with directional, MIMO links could pose grossly diverse propagation geometry across a number of multipaths; as such, channel-models based on stochastic features of diverse MIMO-specific links in the desired test spectrum of mm-wave/THz band are sparsely known and almost non-existent. To alleviate this niche, a method is proposed here to infer sub-mm band MIMO channel-models (termed as “prototypes”) by judiciously sharing “similarity” of details available already pertinent to traditional “models” of lower-side EM spectrum, (namely, VLF through micro-/mm-wave). Relevant method proposed here relies on the “principle of similitude” due to Edgar Buckingham. Exemplar set of “model-to-(inferential)-prototype” transformations are derived and prescribed for an exhaustive set of fading channel models as well as, towards estimating path-loss of various channel statistics in the high-end test spectrum.


Author(s):  
Layak Ali Sd ◽  
K. Kishan Rao ◽  
M. Sushanth Bab

In this papers an efficient ordering scheme for an ordered successive interference cancellation detector is determined under the bit error rate minimization criterion for multiple-input multiple-output(MIMO) communication systems using transmission power control. From the convexity of the Q-function, we evaluate the choice of suitable quantization characteristics for both the decoder messages and the received samples in Low Density Parity Check (LDPC)-coded systems using M-QAM schemes. We derive the ordering strategy that makes the channel gains converge to their geometric mean. Based on this approach, the fixed ordering algorithm is first designed, for which the geometric mean is used for a constant threshold using correlation among ordering results.


Sign in / Sign up

Export Citation Format

Share Document