Application of Synchro-Phasor Measurement Unit in Smart Grid Including Renewable Energy

2022 ◽  
pp. 764-778
Author(s):  
Meriem Mahboubi ◽  
Abderrahmane Ouadi

Renewable energy is one of the most abundant energies in our planet. In order to satisfy the world demand of electrical energy, solar and wind energy may be used. Identical to all other types of power generation plants, the integration of these renewable energy sources in smart power grid has an impact on its operation. Thus, when the electrical power is injected into the power grid by these energy sources, the system electrical parameters must be well monitored for synchronization purpose. This can be accomplished with the aid of synchro-phasors measurement units. The phase angle of the utility is a critical parameter for the operation of power devices feeding power into the grid such as PV and wind energy inverters. There are many techniques to obtain the grid phase angle such as the zero-crossing detection and the orthogonal phase locked loop. This research work discusses the use of PMUs (Phasor Measurement Unit) for providing this important parameter to system synchronization in the case of high penetration of solar or wind energy in the power grid.

Author(s):  
Meriem Mahboubi ◽  
Abderrahmane Ouadi

Renewable energy is one of the most abundant energies in our planet. In order to satisfy the world demand of electrical energy, solar and wind energy may be used. Identical to all other types of power generation plants, the integration of these renewable energy sources in smart power grid has an impact on its operation. Thus, when the electrical power is injected into the power grid by these energy sources, the system electrical parameters must be well monitored for synchronization purpose. This can be accomplished with the aid of synchro-phasors measurement units. The phase angle of the utility is a critical parameter for the operation of power devices feeding power into the grid such as PV and wind energy inverters. There are many techniques to obtain the grid phase angle such as the zero-crossing detection and the orthogonal phase locked loop. This research work discusses the use of PMUs (Phasor Measurement Unit) for providing this important parameter to system synchronization in the case of high penetration of solar or wind energy in the power grid.


2014 ◽  
Vol 10 (1) ◽  
pp. 38-45
Author(s):  
Angel Terziev ◽  
Ivan Antonov ◽  
Rositsa Velichkova

Abstract Increasing the share of renewable energy sources is one of the core policies of the European Union. This is because of the fact that this energy is essential in reducing the greenhouse gas emissions and securing energy supplies. Currently, the share of wind energy from all renewable energy sources is relatively low. The choice of location for a certain wind farm installation strongly depends on the wind potential. Therefore the accurate assessment of wind potential is extremely important. In the present paper an analysis is made on the impact of significant possible parameters on the determination of wind energy potential for relatively large areas. In the analysis the type of measurements (short- and long-term on-site measurements), the type of instrumentation and the terrain roughness factor are considered. The study on the impact of turbulence on the wind flow distribution over complex terrain is presented, and it is based on the real on-site data collected by the meteorological tall towers installed in the northern part of Bulgaria. By means of CFD based software a wind map is developed for relatively large areas. Different turbulent models in numerical calculations were tested and recommendations for the usage of the specific models in flows modeling over complex terrains are presented. The role of each parameter in wind map development is made. Different approaches for determination of wind energy potential based on the preliminary developed wind map are presented.


2018 ◽  
Vol 17 (2) ◽  
pp. 31-36
Author(s):  
Abir Muhtadi ◽  
Ahmed Mortuza Saleque ◽  
Mohammad Abdul Mannan

Due to sheer dependency upon fossil fuel sources, Bangladesh as a country is not free from numerous negative aspects. Country’s requirement for a certain portion of power be generated from renewable energy sources is due and required renewable energy target (RET) needs to be fulfilled. In this study, potential of distinguished coastal sites for entirely renewable energy such as solar and wind sources based microgrid for chosen community is explored. Microgrid architecture is appropriate considering the coastal areas’ geographical locations and due to the inconvenience in grid extension. Study suggests, potential of coastal sites are found to be feasible for such structures based on real case scenario data and modelled technical scheme.


2020 ◽  
Vol 10 (18) ◽  
pp. 6398
Author(s):  
Meysam Majidi Nezhad ◽  
Riyaaz Uddien Shaik ◽  
Azim Heydari ◽  
Armin Razmjoo ◽  
Niyazi Arslan ◽  
...  

The elaboration of a methodology for accurately assessing the potentialities of blue renewable energy sources is a key challenge among the current energy sustainability strategies all over the world. Consequentially, many researchers are currently working to improve the accuracy of marine renewable assessment methods. Nowadays, remote sensing (RSs) satellites are used to observe the environment in many fields and applications. These could also be used to identify regions of interest for future energy converter installations and to accurately identify areas with interesting potentials. Therefore, researchers can dramatically reduce the possibility of significant error. In this paper, a comprehensive SWOT (strengths, weaknesses, opportunities and threats) analysis is elaborated to assess RS satellite potentialities for offshore wind (OW) estimation. Sicily and Sardinia—the two biggest Italian islands with the highest potential for offshore wind energy generation—were selected as pilot areas. Since there is a lack of measuring instruments, such as cup anemometers and buoys in these areas (mainly due to their high economic costs), an accurate analysis was carried out to assess the marine energy potential from offshore wind. Since there are only limited options for further expanding the measurement over large areas, the use of satellites makes it easier to overcome this limitation. Undoubtedly, with the advent of new technologies for measuring renewable energy sources (RESs), there could be a significant energy transition in this area that requires a proper orientation of plans to examine the factors influencing these new technologies that can negatively affect most of the available potential. Satellite technology for identifying suitable areas of wind power plants could be a powerful tool that is constantly increasing in its applications but requires good planning to apply it in various projects. Proper planning is only possible with a better understanding of satellite capabilities and different methods for measuring available wind resources. To this end, a better understanding in interdisciplinary fields with the exchange of updated information between different sectors of development, such as universities and companies, will be most effective. In this context, by reviewing the available satellite technologies, the ability of this tool to measure the marine renewable energies (MREs) sector in large and small areas is considered. Secondly, an attempt is made to identify the strengths and weaknesses of using these types of tools and techniques that can help in various projects. Lastly, specific scenarios related to the application of such systems in existing and new developments are reviewed and discussed.


Author(s):  
P. Venkaiah ◽  
B. K. Sarkar

Abstract The advantages of renewable energy sources are available freely in nature, inexhaustible, produce either no or little pollution and low gestation period. Among all renewable energy sources, wind energy has become one of the leading resources for power production in the world as well as in the India. According to WWEA, the wind turbine installation capacity in the world has been reached over 539.291GW by the end of 2017. The entire wind power installed capacity by the end of 2017 covers more than 5% of global demand of electricity. In India, the present wind power installation capacity on October, 2017 was over 32.7GW and wind energy contribution is 55% of the total renewable energy capacity in the country. Inspite of having sharp growth rate in wind in India, only a fraction of wind energy has been tapped until now out of 302 GW wind potential which is available above 100 m height on shore. Practical horizontal axis wind turbine converts kinetic energy in the wind into useful energy by using airfoil blades. Blade element momentum (BEM) theory becomes very popular due to its simplicity in mathematical calculation as well as accuracy. Hydraulic pitch actuation system has certain advantages due to its versatility, ability to produce constant force and torque irrespective of the disturbances outside of the system, ease and accuracy of control, simplicity, safety and economy. In the present study a semi rotary actuator has been utilized for turbine pitch actuation. In order to extract maximum power from available wind, fractional order PID controller (FOPID) has been developed for pitch control of wind turbine rotor blade. The performances of PID as well as FOPID controller have been compared with available wind data. The performance of FOPID controller was satisfactory compare to PID controller.


Sign in / Sign up

Export Citation Format

Share Document