Industry 4.0 and Sustainability

Author(s):  
Sibel Yildiz Çankaya ◽  
Bülent Sezen

Modern industry developed over several centuries and three industrial revolutions. Today, we experience the fourth era of the industrial revolution, Industry 4.0. The advance of industrialization brought along many problems, including environmental pollution, global warming, and depletion of natural resources. As a result, the concept of sustainability began to gain importance. Sustainability can be achieved through a balance between economic, social, and environmental processes. In order to establish such balance, businesses need new business models or insights. At this point, Industry 4.0 can be regarded as a new business mindset that will help businesses and communities move towards sustainable development. The technologies used by Industry 4.0 bear a strong promise to solve these problems, after all. Even though Industry 4.0 attracts a lot of attention lately, few works are available on its impact on sustainability. This chapter examines the impact of Industry 4.0 on sustainability.

Author(s):  
Sibel Yildiz Çankaya ◽  
Bülent Sezen

Modern industry developed over several centuries and three industrial revolutions. Today, we experience the fourth era of the industrial revolution, Industry 4.0. The advance of industrialization brought along many problems, including environmental pollution, global warming, and depletion of natural resources. As a result, the concept of sustainability began to gain importance. Sustainability can be achieved through a balance between economic, social, and environmental processes. In order to establish such balance, businesses need new business models or insights. At this point, Industry 4.0 can be regarded as a new business mindset that will help businesses and communities move towards sustainable development. The technologies used by Industry 4.0 bear a strong promise to solve these problems, after all. Even though Industry 4.0 attracts a lot of attention lately, few works are available on its impact on sustainability. This chapter examines the impact of Industry 4.0 on sustainability.


Author(s):  
Iwona Dorota Bąk ◽  
Beata Szczecińska

The aim of the study is to attempt to systematize the concept of economic value that takes into account elements of sustainable development. At the same time, it is the voice in the ongoing discussion on the purpose and methods of valuation of the company's value. The measure of strength of each enterprise is its value expressed in monetary units. Due to differences in the results of the valuation of enterprises made by groups of experts representing such disciplines as finance, taxes, or marketing, there was a need to identify sources and to analyze more precisely the resulting discrepancies. The values of the enterprise should include both measurable and hard to measure values, which largely differentiate economic units from each other. The need for a wider perspective on the data published by enterprises appeared along with new business models, changes in consumer trends, environmental regulations, or the impact of social media.


2021 ◽  
Author(s):  
Olena Dovgal ◽  
◽  
Georgiy Dovgal ◽  

The article considers the potential for transformation of the world economy under the influence of digital globalization in the era of the fourth industrial revolution. It is substantiated that within the framework of digital globalization the paradigm of organization of production, configuration and content of international trade are changing. At the same time, the process of digitalization leads to qualitative changes in all spheres of production, economic and trade activities around the world. Formation of production technological processes using the Internet of Things, modules of artificial intelligence and 3D-printing allows to reduce production costs and increase the competitiveness of products. Attention is focused on the essence of the changes taking place, the directions of the vectors of economic development in the context of the changing digital space. Particular attention is paid to the functioning of new business models (in particular, digital platforms), the transformation of the structure, configuration, forms and methods of international trade, as well as the impact of ongoing processes on international competitiveness. An important place is given to the problems of e-commerce, the content of the processes taking place in this segment of international economic relations. Some approaches to solving the problems of digitalization at the international and national levels are proposed. In the global dimension, it is important to ensure, through the adoption of binding legal documents for WTO member states on the freedom of information exchange, aimed at stimulating innovative development, promoting the removal of barriers in the e-commerce segment, encouraging investment in digital infrastructure and human capital. . The development of the country's digital potential and digital infrastructure involves the implementation of localization measures, ie requires the creation of national platforms for the accumulation and storage of information. It is concluded that the global process of digitalization creates the potential for dynamic development of new business models, stimulates productivity and increases competitiveness.


Author(s):  
Gábor Rekettye

This conceptual study would like to draw attention to the effects of industry 4.0 on the pricing policies of the disruptor companies. The study concludes that the zone of pricing decisions is growing due to the impact of Industry 4.0. The different technologies offered by the digitalization makes it possible for the disruptor companies to use new pricing methods or use the old ones differently. Pricing has become, in most cases, the core element of the new business models the disruptors have created and practised. The study points out that besides new products and technologies, even new pricing models can be the primary constituents of the disruption. The study tries to categorize and describe the most exciting new pricing policies used by disruptor companies.


Author(s):  
Sandro Trento ◽  
Mariasole Bannò ◽  
Giorgia D’Allura

The challenges of  the 4th Industrial Revolution (I40) entail new business models to improve customer value creation. So far, academic investigation into I40 has been extensively focused on large enterprises, and only marginally on SMEs. The present paper aims to answer to the following four research questions: How do manufacturing SMEs perceive the I40 phenomenon? How do manufacturing SMEs innovate their business models because of I40? How do manufacturing SMEs behave with their suppliers because of I40? How do manufacturing SMEs behave with their customers because of I40?


2018 ◽  
Vol 24 (4) ◽  
pp. 965-984 ◽  
Author(s):  
Florian Bienhaus ◽  
Abubaker Haddud

Purpose While digitisation is a key driver of the fourth industrial revolution (Industry 4.0); organisations have different approaches to deal with this topic to get a clearer picture of the opportunities and challenges concerning the digital transformation. The purpose of this paper is to identify the impact of digitisation on procurement and its role within the area of supply chain management. The research will also explore potential barriers to digitising procurement and supply chains and ways to overcome them. Finally, the significance of potential enabling technologies to the digitisation will also be examined. Design/methodology/approach A quantitative approached utilising an online survey was used to collect the primary data for this study. Data were collected from 414 participants directly involved with procurement or related business functions and work for different organisations in different industries. The survey included eight items about the impact of digitisation on organisational performance in the area of procurement and supply chains; ten items related to key barriers to digitisation of organisations and ways to overcome them; and seven items about enabling technologies to leverage procurement procedures and processes digitisation. All of these items utilised the Likert five-point level of agreement scale. Findings The findings indicate that digitisation of procurement process can yield several benefits including: supporting daily business and administrative tasks, supporting complex decision-making processes, procurement will become more focussed on strategic decisions and activities, procurement will become a strategic interface to support organisational efficiency, effectiveness, and profitability, and supporting the creation of new business models, products, and services. The authors were also able to confirm that there are barriers to digitising procurement process and supply chains and such barriers found in existing procedures, processes, capacities, and capabilities. Finally, the significance of a number of enabling technologies to the digitisation process was revealed. Originality/value To the best of the authors’ knowledge, this is the first study of its kind with participants located world-wide. Industry 4.0 as a topic had been explored within different business areas and functions but very limited research specifically explored potential impact, barriers, and enabling technologies of procurement 4.0. The results can be beneficial for organisations already implemented Industry 4.0 or planning to do so. The study can also benefit academic scholars interested in the researched topic, business professionals, organisations within different sectors, and any other party interested in understanding more the concept of procurement 4.0.


Author(s):  
Janusz Wielki

Currently there are many studies which deal with the impact of the Internet and Internet technology-based tools on organizations. Most of them are focused on such issues as the opportunities which have emerged with the development of the digital economy, possible new business models, establishing new kind of relations with customers, and security aspects. The impact of Internet technology-based tools on the internal work environment of organizations is an issue which is relatively rarely analyzed. Although more and more publications concerning this field are being released, they are only focused to a small degree on the challenges connected with the utilization, and, particularly, the misuse, of Internet technology-based tools in the workplace. Thus, this article is an attempt to deal with this issue in a more holistic way.


2020 ◽  
Vol 311 ◽  
pp. 02015
Author(s):  
Sergey Efimushkin ◽  
Anna Efimushkina

The article, on the basis of domestic and foreign experience, the problems of possible limitations in the short term, natural resources, as well as the possibility of increasing the effectiveness of the solution of global problems of natural resources and sustainable development of society by improving innovation, creating natural-like technology, the convergence of technological innovation, organizational transformation and designing new business models. The examples of the development of innovative technologies, the creation of technical equipment and their practical use in the interaction of universities and industrial enterprises are considered. The possibilities of increasing synergies through the use of business incubators, science and technology parks, technology clusters as well as partnerships between universities and industrial enterprises are considered. The foreign experience and successful domestic experience of innovative activity of the regions confirming the prospects of creating innovative territories of priority development using the integration of scientific, educational and industrialentrepreneurial activities of various forms of organization and support of innovative activities are presented. The analysis of the competencies and characteristics of an engineer-entrepreneur necessary for successful work in the modern conditions of an innovative economy is carried out, as well as recommendations for the successful formation of the required competencies and characteristics.


Subject Outlook for industry 4.0. Significance Dubbed variously 'Industry 4.0', 'intelligent manufacturing' or the 'internet of everything', cyber-physical systems that control the flow of materials, products and information are starting to transform industrial production and supply chains. They will eventually disrupt business models and challenge policymakers. Impacts Improved production flexibility and vertical integration with customers should facilitate bespoke manufacturing ('mass customisation'). Entire value chains will vertically integrate, embracing product design, procurement, production, distribution, sales and maintenance. Horizontal integration around smart factories will create new business models based on manufacturing as a service (MaaS). Pay-by-use and subscription-based MaaS could upend traditional models for financing capital expenditure on plant and equipment.


2020 ◽  
Vol 10 (1) ◽  
pp. 33-54
Author(s):  
Anatoliy Kolot ◽  
Oksana Herasymenko

With the development of the Fourth Industrial Revolution and the formation of a new technological basis – “Industry 4.0” - a dynamic multi-vector transformation of the leading institutes of economy and society takes place, social and labor relations in general and employment in particular acquire new format and content. The quintessence of the article is a scientific-applied substantiation of the construct of nontypical employment economy, scientific argumentation and further development of previous researches of authors regarding determinants of gig-economy formation under the influence of economic and social development “digitalization” and emergence of new business models. that radically change all components of the world of work. New facets of the complex world of work and employment have been revealed and the increase of the newest knowledge in this field has been received under systematic research of a chain of changes: introduction of “Industry 4.0” breakthrough technologies → “digitalization” as a dominant vector of technological innovations → formation of new business models → changes in social division of labor and the content of labor processes → the emergence and intensive development of employment forms immanent to the new (digital) economy. It is substantiated that the main root cause, a kind of “trig- ger” for the emergence and reproduction of the chain of researched changes is digital transformation of the economy and society. The essence of today’s phenomena, which determine the development of the “gig economy”, is revealed. The argumentation of the spread of platform business models and their impact on the world of work and employment is given. A new theoretical construction of a chain of changes, the “output” of which is new forms and, a new platform for social and labor developmen t in general, has been suggested. The research focuses on finding answers to a number of questions posed to every conscious person. Among them are the following ones: Why can’t the modern economy “get along” with traditional (standard) forms of employment? Why does atypicality become not the exception but the norm? How do specific mechanisms and tools for transforming standard forms of employment into new ones, which are immanent to modern conditions of economic and social progress, behave in practice?


Sign in / Sign up

Export Citation Format

Share Document