Arching Effect of Anti-Slide Piles in Non-Cohesion Soil

2012 ◽  
Vol 170-173 ◽  
pp. 950-953
Author(s):  
Zhi Tao Ma ◽  
Yong Ping Wang ◽  
Sai Jiang Liang
Keyword(s):  
Numerical Simulation ◽  
Influencing Factors ◽  
Earth Pressure ◽  
Cohesive Soil ◽  
Soil Reinforcement ◽  
Soil Arching ◽  
Pile Spacing ◽  
Arching Effect ◽  
Soil Arching Effect ◽  
Horizontal Pressure

In recent years, Anti-slide pile has been widely used in soil reinforcement works, but the pile soil interaction is not very clear. Numerical simulation was used in this article to analyze the soil arcing effect between anti-slide piles in non-cohesive soil and the main influencing factors, such as soil horizontal pressure, pile spacing and so on were also analyzed. The results show that there has soil arching in non-cohesive soil, and the soil arching effect becomes significantly with the horizontal earth pressure increases, but when the pressure increases to a certain degree, the soil arching will be damaged. The pile spacing is also a major factor to affect the soil arching effect, increases with the pile spacing, the soil arching effect gradually weakened.

scholarly journals Pile-Spacing Calculation of Anti-Slide Pile Based on Soil Arching Effect

2020 ◽  
Vol 2020 ◽  
pp. 1-6 ◽  
Author(s):  
Guangfu Chen ◽  
Liangchao Zou ◽  
Qing Wang ◽  
Guodong Zhang
Keyword(s):  
Load Capacity ◽  
Limit Equilibrium ◽  
Interaction Mechanism ◽  
Soil Arching ◽  
Pile Spacing ◽  
Arching Effect ◽  
Soil Arching Effect ◽  
Engineering Designs ◽  
Practical Engineering ◽  
The Difference

Anti-slide pile is one of the most frequently used measures in landslide control globally. Pile-spacing has always been determined by the load capacity of single piles or according to engineering empirical experience. Many engineering practices and laboratory experiments show that the soil arching effect exists in landslide control with anti-slide piles. In this study, we aim to calculate pile-spacing in terms of the soil arching effect. We investigated the pile-soil interaction mechanism and propose that, at the limit, the pile-back soil arch resists landslide thrust only. According to Mohr–Coulomb strength theory and limit equilibrium theories, we derived a new pile-spacing calculation equation. We verified the derived pile-spacing calculation equation with real projects. The calculated results are similar to those of practical engineering designs, in which the difference is within 10%. The equation can be used in anti-slide pile preliminary design. This study can be a reference for pile-spacing calculation based on the soil arching effect.

Research on Chamber Earth Pressure of EPB Shield Considering Soil Arching Effect

2014 ◽  
Vol 1065-1069 ◽  
pp. 373-377
Author(s):  
Jing Cao ◽  
Hai Xing Yang ◽  
Bo Liang ◽  
Hai Ming Liu
Keyword(s):  
Earth Pressure ◽  
Shield Tunnel ◽  
Pressure Balance ◽  
Soil Arching ◽  
Shield Tunneling ◽  
Arching Effect ◽  
Soil Arching Effect ◽  
Earth Pressure Balance ◽  
Tunnel Depth ◽  
Epb Shield

Chamber earth pressure is one of the significant parameters during the Earth Pressure Balance (EPB) shield construction processing. The soil arching effect is existence when the tunnel depth is enough. It is significant to consider the influence of arching effect to analyze the pressure in soil chamber in shield tunneling. In this paper, the influence of arching effect is considered to calculate the chamber earth pressure. Firstly, the soil is supposed as loose media, and the necessary buried depth of producing arching affects is deduced according to the loose media theory. Then, based on the characteristic of proper arching axis, the equation and the height of proper arch are obtained. At last, the calculation formula of minimum chamber earth pressure of EPB shield tunnel is deduced which can consider the effect of arching effect.

scholarly journals Active Earth Pressure of Limited C-φ Soil Based on Improved Soil Arching Effect

2020 ◽  
Vol 10 (9) ◽  
pp. 3243
Author(s):  
Meilin Liu ◽  
Xiangsheng Chen ◽  
Zhenzhong Hu ◽  
Shuya Liu
Keyword(s):  
Retaining Wall ◽  
Pressure Coefficient ◽  
Ground Surface ◽  
Side Wall ◽  
Earth Pressure ◽  
Active Earth Pressure ◽  
Soil Arching ◽  
Retaining Structure ◽  
Arching Effect ◽  
Soil Arching Effect

For c-φ soil formation (cohesive soil) of limited width with ground surface overload behind a deep retaining structure, a modified active earth pressure calculation model is established in this study. And three key issues are addressed through improved soil arching effect. First, the soil-wall interaction mechanism is determined by considering the soil arching effect. The slip surface of a limited soil is proved to be a double-fold line passing through the retaining wall toe and intersecting the side wall of the existing underground structure until it reaches the ground surface along the existing side wall. Second, the limited width boundary is explicated. And third, the variation in the active earth pressure from parameters of limited c-φ soil is determined. The lateral active earth pressure coefficient is nonlinear distributed based on the improved soil arching effect of the symmetric catenary curve. Furthermore, the active earth pressure distribution, the tension crack at the top of the retaining wall and the resultant force and its action point were obtained. By comparing with the existing analytical methods, such as the Rankine method, it demonstrates that the model proposed in this study is much closer to the measured and numerical results. Ignoring the influence of soil cohesion and the limited width will exponentially reduce the overall stability of the retaining structure and increase the risk of accidents.

scholarly journals Active Earth Pressure against Rigid Retaining Walls for Finite Soils in Sloping Condition considering Shear Stress and Soil Arching Effect

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Weidong Hu ◽  
Kangxing Liu ◽  
Xinnian Zhu ◽  
Xiaolong Tong ◽  
Xiyu Zhou
Keyword(s):  
Shear Stress ◽  
Principal Stress ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Active Earth Pressure ◽  
Soil Arching ◽  
Soil Layers ◽  
Arching Effect ◽  
Soil Arching Effect ◽  
Application Point

The horizontal differential layer element method was used to study the active earth pressure of the finite-width soil formed by the rigid retaining wall for the embankment or adjacent foundation pits. The cohesionless soil was taken as the research object, and the soil arch theory was introduced based on the translation mode of rigid retaining wall and the linear sliding fracture surface. The minor principal stress line was assumed as circular, considering the deflected principal stress as soil arching effect. The shear stress between level soil layers in the failure wedge was calculated, and the differential level layer method was modified. Then, the theoretical formula of the active earth pressure, the resultant earth pressure, and the point of application of resultant earth pressure were obtained using this revised method. The predictions by the proposed formula were compared with the existing methods combined with the cases. It is shown that the resultant finite pressure increases gradually and approaches to Coulomb active earth pressure values when the soil is infinite, with the increase of the ratios of the backfill width to height. Moreover, the horizontal pressure for limited soils is distributed nonlinearly along the wall height. Considering the shear stress between level soil layers and the soil arching effect, the position of application point of the resultant active earth pressure by the proposed formulation is higher than that of Coulomb’s solution. The wall is rougher, and the resultant pressure will be smaller. The application point distance from the bottom of the wall will increase. Finally, an experiment was conducted to verify the distribution of the active earth pressure for finite soil against rigid retaining wall, and the research results agree well with those of the experimented observations.

Sign in / Sign up

Export Citation Format

Share Document