FE Design Tool for Laminated Composite Plates

2012 ◽  
Vol 248 ◽  
pp. 379-383
Author(s):  
Rasoul Khandan ◽  
Philip Sewell ◽  
Siamak Noroozi ◽  
Mohammad Reza Ramazani
Keyword(s):  
Composite Materials ◽  
Transverse Shear ◽  
Laminated Composite ◽  
Composite Plates ◽  
Design Tool ◽  
Computational Technique ◽  
The Finite Element Method ◽  
Laminated Composite Plates ◽  
Wide Range ◽  
Good Agreement

Considering the non-linearity, complexity and anisotropy of constitutive equations in composite materials, numerical methods are essential to evaluate the behaviour of this material. The finite element method (FEM) is a powerful computational technique for the solution of differential and integral equations that arise in various fields of engineering and applied science such as composite materials. Here, an FEM tool is designed to analyse non-linearity in the behaviour of composites caused by the effect of transverse shear and twist in laminated composite plates. The tool is established by using FEM for composites in ABAQUS combined with programming in Python to run the tests for all possible fibre orientations in laminated composite plates. It is shown that the tool has the ability to design laminated composite plates by considering the effect of transverse shear and the tool’s output provides results for all different fibre orientations. It is demonstrated that there is good agreement between numerical results obtained from this tool and experimental results. The advantages of the tool give designers the opportunity to use this tool for wide range of products.

scholarly journals Experimental and Numerical Buckling Analyses of Laminated Composite Plates under Temperature Effects

2010 ◽  
Vol 19 (4) ◽  
pp. 096369351001900 ◽  
Author(s):  
Emin Ergun
Keyword(s):  
Composite Plate ◽  
Numerical Solutions ◽  
Laminated Composite ◽  
Composite Plates ◽  
Buckling Load ◽  
Fibre Reinforcement ◽  
Stacking Sequence ◽  
Laminated Composite Plates ◽  
Different Temperatures ◽  
Good Agreement

The aim of this study is to investigate, experimentally and numerically, the change of critical buckling load in composite plates with different ply numbers, orientation angles, stacking sequences and boundary conditions as a function of temperature. Buckling specimens have been removed from the composite plate with glass-fibre reinforcement at [0°]i and [45°]i (i= number of ply). First, the mechanical properties of the composite material were determined at different temperatures, and after that, buckling experiments were done for those temperatures. Then, numerical solutions were obtained by modelling the specimens used in the experiment in the Ansys10 finite elements package software. The experimental and numerical results are in very good agreement with each other. It was found that the values of the buckling load at [0°] on the composite plates are higher than those of other angles. Besides, symmetrical and anti-symmetrical conditions were examined to see the effect of the stacking sequence on buckling and only numerical solutions were obtained. It is seen that the buckling load reaches the highest value when it is symmetrical in the cross-ply stacking sequence and it is anti-symmetrical in the angle-ply stacking sequence.

Stress analysis of smart composite plate structures

2020 ◽  
pp. 095440622097544
Author(s):  
Aniket Chanda ◽  
Utkarsh Chandel ◽  
Rosalin Sahoo ◽  
Neeraj Grover
Keyword(s):  
Shear Deformation ◽  
Transverse Shear ◽  
Laminated Composite ◽  
Composite Plates ◽  
Higher Order ◽  
Hyperbolic Function ◽  
Solution Technique ◽  
Shear Stresses ◽  
Laminated Composite Plates ◽  
Equilibrium Equations

In the present study, the electro-mechanical responses of smart laminated composite plates with piezoelectric materials are derived using a two-dimensional (2 D) displacement-based non-polynomial higher-order shear deformation theory. The kinematics of the mathematical model incorporates the deformation of laminates which account for the effects of transverse shear deformation and a non-linear variation of the in-plane displacements using inverse sine hyperbolic function of the thickness coordinate. The equilibrium equations are obtained using the minimization of energy principle known as the principle of minimum potential energy (PMPE) which is also based on a variational approach and the solutions are obtained using Navier’s solution technique for diaphragm supported smart laminated composite plates. The responses obtained in the form of deflection and stresses are compared with three dimensional (3 D) solutions and also with different polynomial and non-polynomial based higher-order theories in the literature. The transverse shear stresses are obtained using 3 D equilibrium equations of elasticity to enhance the accuracy of the present results. Various examples are numerically solved to establish the efficiency of the present model.

Thermoelastic bending analysis of laminated composite plates according to various shear deformation theories

2014 ◽  
Vol 5 (1) ◽  
Author(s):  
Atteshamuddin Shamshuddin Sayyad ◽  
Bharati Machhindra Shinde ◽  
Yuwaraj Marotrao Ghugal
Keyword(s):  
Shear Stress ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Virtual Work ◽  
Plate Theory ◽  
Thermal Response ◽  
Laminated Composite ◽  
Composite Plates ◽  
Shear Stresses ◽  
Laminated Composite Plates

AbstractThis study presents the thermoelastic analysis of laminated composite plates subjected to sinusoidal thermal load linearly varying across the thickness. Analytical solutions for thermal displacements and stresses are investigated by using a unified plate theory which includes different functions in terms of thickness coordinate to represent the effect of shear deformation. The theory presented is variationally consistent, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. Governing equations of equilibrium and associated boundary conditions of the theory are obtained using the principle of virtual work. The Navier solution for simply supported laminated composite plates has been developed. Numerical results are presented to demonstrate the thermal response of the laminated composite plates.

scholarly journals Nonlinear Free Vibration for Viscoelastic Moderately Thick Laminated Composite Plates with Damage Evolution

2010 ◽  
Vol 2010 ◽  
pp. 1-15 ◽  
Author(s):  
Y. F. Zheng ◽  
L. Q. Deng
Keyword(s):  
Free Vibration ◽  
Transverse Shear ◽  
Superposition Principle ◽  
Laminated Composite ◽  
Composite Plates ◽  
Laminated Plates ◽  
Damage Effect ◽  
Laminated Composite Plates ◽  
Nonlinear Free Vibration ◽  
The Galerkin Method

The nonlinear free vibration for viscoelastic cross-ply moderately thick laminated composite plates under considering transverse shear deformation and damage effect is investigated. Based on the Timoshenko-Mindlin theory, strain-equivalence hypothesis, and Boltzmann superposition principle, the nonlinear free vibration governing equations for viscoelastic moderately thick laminated plates with damage are established and solved by the Galerkin method, Simpson integration, Newton-Cotes, Newmark, and iterative methods. In the numerical results, the effects of transverse shear, material viscoelasticity, span-thickness ratio, aspect ratio, and damage effect on the nonlinear free vibrating frequency of the viscoelastic cross-ply moderately thick laminated plates are discussed.

Sign in / Sign up

Export Citation Format

Share Document