Experimental Study on Convolution Flow near Charged Spray Nozzle

2010 ◽  
Vol 29-32 ◽  
pp. 1675-1679
Author(s):  
Zhen Tao Wang ◽  
Jun Feng Wang ◽  
Wei Dong Jia ◽  
Ti Qian Luo
Keyword(s):  
Flow Structure ◽  
Flue Gas ◽  
Particle Image ◽  
Jet Flow ◽  
Dust Particles ◽  
Flow Section ◽  
Spray Nozzle ◽  
Image Velocimetry ◽  
Gas Removal ◽  
Form Development

The electrostatic jet flow has been widely employed to crop-dusting, painting, fuel spray and combustion, electrostatic painting, dust particles and flue gas removal. In order to investigate the convolution flow structure near the nozzle, discuss the effects of electrostatic voltages on convolution flow form, development and the aggrandizement of droplets mass transfer. PIV (Particle Image Velocimetry) was employed to measure and analyze the convolution flow near the nozzle under different voltages, and the velocity vectors and streamlines were gained. Experiment and analysis indicate that convolution flow structure has been existed in electrostatic jet flow brim and the main jet flow section change is inconspicuous with voltages adding; Electrical filed intensity has been enhanced and the droplets convolution flow was picked up with the electrostatic voltages adding. The convolution flow structure could quicken the gas mix into the main jet flow, and enhanced the droplets absorbency.

Different Modes of Gas Entrainment Through Bottom Discharge Branch by Using Three Dimensional Particle Image Velocimetry System

2007 ◽  
Author(s):  
Wael Fairouz Saleh ◽  
Ibrahim Galal Hassan
Keyword(s):  
Particle Image Velocimetry ◽  
Flow Structure ◽  
Particle Image ◽  
Three Dimensional ◽  
Industrial Applications ◽  
Particle Image Velocimetry System ◽  
Three Dimension ◽  
Two Phase ◽  
Mean Velocity ◽  
Image Velocimetry

The discharge of two-phase flow from a stratified region through single or multiple branches is an important process in many industrial applications including the pumping of fluid from storage tanks, shell-and-tube heat exchangers, and the fluid flow through small breaks in cooling channels of nuclear reactors during loss-of-coolant accidents (LOCA). Knowledge of the flow phenomena involved along with the quality and mass flow rate of the discharging stream(s) is necessary to adequately predict the different phenomena associated with the process. Particle Image Velocimetry (PIV) in three dimension was used to provide detailed measurements of the flow patterns involving distributions of mean velocity, vorticity field, and flow structure. The experimental investigation was carried out to simulate two phase discharge from a stratified region through branches located on a semi-circular wall configuration during LOCA scenarios. The semi-circular test section is in close dimensional resemblance with that of a CANDU header-feeder system, with branches mounted at orientation angles of zero, 45 and 90 degrees from the horizontal. The experimental data for the phase development (mean velocity, flow structure, etc.) was done during single discharge through the bottom branch from an air/water stratified region over a three selected Froude numbers. These measurements were used to describe the effect of outlet flow conditions on phase redistribution in headers and understand the entrainment phenomena.

Simulation and Experimental Investigations of Fiber Diameter of Spunbonding Nonwovens by Means of the Air Jet Flow Field Model

2010 ◽  
Vol 136 ◽  
pp. 5-9
Author(s):  
B. Zhao
Keyword(s):  
Experimental Data ◽  
Flow Field ◽  
Particle Image ◽  
Field Model ◽  
Fiber Diameter ◽  
Jet Flow ◽  
Experimental Investigations ◽  
Air Velocity ◽  
Air Jet ◽  
Image Velocimetry

The air jet flow field models of spunbonding process are founded. It is simulated by means of the finite difference method. The numerical simulation computation results of distributions of the air velocity match quite well with the experimental data. The air drawing model of polymer is solved with the help of the distributions of the air velocity measured by a particle image velocimetry. The predicted filament fiber diameter agrees with the experimental data well.

Stereo three-dimensional particle image velocimetry measurement and aerodynamic force analysis of non-spinning soccer balls

2020 ◽  
Vol 234 (2) ◽  
pp. 146-153 ◽  
Author(s):  
Masaki Hiratsuka ◽  
Shinichiro Ito ◽  
Keita Miyasaka ◽  
Akihisa Konno
Keyword(s):  
Particle Image Velocimetry ◽  
Particle Image ◽  
Aerodynamic Force ◽  
Three Dimensional ◽  
Jet Flow ◽  
Flight Path ◽  
Wake Flow ◽  
Force Measurements ◽  
Flow Measurements ◽  
Image Velocimetry

A knuckle shot, resulting from non-spinning kicking, is an essential technique in soccer. The irregular flight path of the knuckle shot is caused by the aerodynamic force from the three-dimensional twin vortices generated in the wake behind the ball. However, the detailed behavior of the twin vortices and relation between the jet flow and the acting forces on the balls is still not understood. In addition, a more thorough understanding of the effect of ball panels on the formation of twin vortices and jet flow is important to develop balls with high controllability. To study the effect of the ball panel shape on the flight path, stereo three-dimensional particle image velocimetry wake flow measurements and synchronized force measurements were performed on various soccer balls. It was confirmed that the aerodynamic force on the ball is produced by the jet flow generated by the vortices in the wake flow. The directions of the force followed the changes of the jet flow, and the magnitude of the force was strongly associated with the flow rate of the jet. Moreover, the shape of the ball panels, especially the groove volume, determines the critical Reynolds number and the fluttering of the balls.

Particle image velocimetry studies on the swirling flow structure in the vortex gripper

2012 ◽  
Vol 227 (9) ◽  
pp. 1927-1937 ◽  
Author(s):  
Qiong Wu ◽  
Qian Ye ◽  
GuoXiang Meng
Keyword(s):  
Reynolds Number ◽  
Particle Image Velocimetry ◽  
Turbulent Flow ◽  
Flow Structure ◽  
Particle Image ◽  
Swirling Flow ◽  
Tangential Velocity ◽  
Internal Flow ◽  
Dynamics Simulation ◽  
Image Velocimetry

In this article, particle image velocimetry was used to measure the two-dimensional flow field for vortex gripper. The vortex gripper was divided into two parts for respective research, including vortex cup and the gas film gap. In the part of vortex cup, the tangential velocity increases gradually, and the velocity decreases intensely in the vicinity of the vortex cup’s wall after it reaches maximum. In addition, the velocity decreases gradually with the increase of the gas film gap. In the part of gas film gap, the tangential velocity increases to maximum along the radial direction first; after the air flows into the gas film gap due to the viscous impedance, it decreases gradually. When the gas film gap’s thickness is smaller, the velocity almost decreases to zero at the external edge of the skirt. However, when the gas film gap increases to a certain thickness, the velocity does not decrease to zero, and the flow air still keeps a certain speed out of it. The velocity decreases gradually with the increase of the gas film gap. The radial velocity in the vortex cup and the gas film gap is of very small order of magnitude comparing with the average velocity and tangential velocity. The analysis of the Reynolds number shows that the flow in the vortex cup is the turbulent flow, and at the part of the gas film gap, the Reynolds number increases with the increase of the gas film gap, and the flow changes from the laminar flow to the turbulent flow. Through the particle image velocimetry experiment, the vortex gripper’s internal flow structure is studied. It is the theory support of the computational fluid dynamics simulation study for vortex gripper and the structure optimization in the future work.

Sign in / Sign up

Export Citation Format

Share Document