The Design and Simulation of Control System for Electrical Heating

2013 ◽  
Vol 325-326 ◽  
pp. 1193-1196
Author(s):  
Guo Sheng Xu

In view of the fact that the performance of any conventional PID control can t meet the requirement an electric boiler temperature control system, this paper puts forward a kind of improved algorithm for tuning the PID parameters. an adaptive fuzzy controller with adjusting factor is proposed in this paper. Experimental results illustrate that the adaptive fuzzy PID controller achieved the system performance index. The method of adaptive fuzzy PID control is a ideal method.

2015 ◽  
Vol 727-728 ◽  
pp. 633-636 ◽  
Author(s):  
Qiang Gu ◽  
Feng Long Zheng ◽  
Bin Bin Liu ◽  
Wen Yan Yang

Since the object model is time-varying and time-delay in the electric boiler temperature control system, Smith Fuzzy PID controller is applied in it. Simulation results in the paper show that the overshoot is reduced by 31.3% compared with the system under Smith PID control and the adjusting time reached a 30% reduction compared with those under Fuzzy PID control with T=380 and τ=110. In order to eliminate the oscillation problem in system when model parameters change, a new Smith Fuzzy PID controller with two degrees of freedom is applied, whose control performance is much better than that of Smith Fuzzy PID.


2009 ◽  
Vol 16-19 ◽  
pp. 150-154 ◽  
Author(s):  
Xue Ming Zhang ◽  
Gui Xiang Zhang ◽  
Feng Shao ◽  
Qing Jie Yang

The PID controllers can be seen in lots of fields, but some complex control system cannot be controlled to achieve a desired performance index. A design method of the fuzzy PID controller that is based on the fuzzy tuning rules and formed by integrating two above control ideas is proposed in this paper. The design procedure about fuzzy PID control can be divided two steps: the first step is to build the fuzzy tuning rules by analysis, and to obtain the parameters of PID controller by reasoning, and then the control action can be determined by the PID control law. The simulation results and the practical control effects show that the compound fuzzy PID controller has better performance than that of the conventional PID control system and meet the practical demands.


2013 ◽  
Vol 284-287 ◽  
pp. 2291-2295
Author(s):  
Man Chen Xiong ◽  
Ling Long Wang ◽  
Yi Heng Jiang

Parameter self-setting fuzzy PID control algorithm for control drying temperature is proposed to improve the problem about big fluctuations in temperature and high pellet broken rate of traditional control on Cold pressure ball drying system in this paper, and the controller create intelligence temperature control system through combine fuzzy control and PID control. We establish fuzzy controller, preparation of fuzzy look-up table in PLC and combined with PID control module to realize fuzzy PID control algorithm, through the computer simulation to analyze the fuzzy PID controller control effect.


2012 ◽  
Vol 466-467 ◽  
pp. 47-51 ◽  
Author(s):  
Jing Liu

The process of PVC polymerization is nonlinear and time-delayed. It is very difficult to establish an exact mathematical model. Based on the analysis of the conventional PID controller’s limitation, the fuzzy PID control system of PVC polymerization is introduced. A new kind of fuzzy PID controller is designed and the three parameters of PID can be self-tuned on-line. The simulation result proves that fuzzy PID controller is better than common PID controller.


2014 ◽  
Vol 945-949 ◽  
pp. 2568-2572
Author(s):  
Si Yuan Wang ◽  
Guang Sheng Ren ◽  
Pan Nie

The test rig for hydro-pneumatic converter used in straddle type monorail vehicles was researched, and its electro-pneumatic proportional control system was set up and simulated based on AMESim/Simulink. Compared fuzzy-PID (Proportion Integral Derivative) controller with PID controller through fuzzy logic tool box in Simulink, the results indicate that, this electro-pneumatic proportional control system can meet design requirements better, and fuzzy-PID controller has higher accuracy and stability than PID controller.


2013 ◽  
Vol 846-847 ◽  
pp. 321-324 ◽  
Author(s):  
Le Peng Song ◽  
Hua Bin Wang

As liquid level cascade system has the character the issue of non-linearity ,time variability and the overshoot,tradition PID control can not meet the requirement of precise molding system. So devise a self-_ adaptive fuzzy PID control .A self-_ adaptive fuzzy PID control combined PID to control calculate way and faintness to control the advantage of method, this text permits water tank to carry on mathematics model to design the double permit a water tank liquid misty PID string class control system. Matlab/Simulink and fuzzy logic toolbox are simulated to the single loop PID control system,the cascade control system and the cascade control system based on fuzzy self-tuning PID were simulated with Simulink. The analysis and simulation results indicate that the character issue of non-linearity ,time variability and the overshoot of the liquid level cascade control system based on a self-_ adaptive fuzzy PID controller are superior to previous of two methods.


2013 ◽  
Vol 341-342 ◽  
pp. 892-895
Author(s):  
Jun Chao Zhang ◽  
Shao Hong Jing

The introduction of the AQC boiler has complex effects on the temperature of Tertiary air, traditional PID is difficult to achieve the effective control. Combined the method of the conventional PID with the fuzzy control theory, a fuzzy self-tuning PID controller is designed. Compared with traditional PID, results of simulation show that the fuzzy PID controller improves not only the adaptability and robustness of the system, but also the system's static and dynamic performance.


Sign in / Sign up

Export Citation Format

Share Document