Vibrodiagnostics and its Application in Manufacturing Practice

2013 ◽  
Vol 390 ◽  
pp. 220-224 ◽  
Author(s):  
Katarina Monkova ◽  
Peter Monka
Keyword(s):  
Mass Production ◽  
Assembly Line ◽  
Operating Mode ◽  
Inspection Method ◽  
Inspection Station

The article deals with the problems that originated at the testing of electromotors after their assembling. The laser inspection station for several types of electromotors was built as the part of assembly line for mass production of electromotors. At the testing, relatively frequent failures of the station were observed. As the inspection method for problems definition was used the vibrodiagnostics. It showed that errors were caused by the deficient fixing of motors during the testing. On the bases of vibration analyses results it was realized the station frame strengthening and so the improvement of operating mode of station.

scholarly journals 3D Printing Build Farms

2021 ◽  
pp. 220-246
Author(s):  
Jennifer Loy ◽  
James I. Novak
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Mass Production ◽  
Assembly Line ◽  
Western World ◽  
The Internet ◽  
Advanced Manufacturing ◽  
Distributed Manufacturing ◽  
Line Production ◽  
Working Practices

The development of high-end, distributed, advanced manufacturing over the last decade has been a by-product of a push to foster new workforce capabilities, while building a market for industrial additive manufacturing (3D printing) machines. This trend has been complemented by a growing democratization in access to commercial platforms via the internet, and the ease of communication it allows between consumers and producers. New ways of distributed working in manufacturing are on the rise while mass production facilities in the Western world are in decline. As automation increasingly excludes the worker from assembly line production, the tools to regain control over manufacturing and commercial interaction are becoming more readily available. As a result, new working practices are emerging. This chapter discusses networked 3D printing build farms and their potential to reshape the future of work for distributed manufacturing. It highlights changes in infrastructure priorities and education for a digitally enabled maker society from an Australian perspective.

Postmodernism is dead, and I’m not quite yet

2019 ◽  
pp. 42-49 ◽  
Author(s):  
A. Y. Kolesnikov
Keyword(s):  
Mass Culture ◽  
Mass Production ◽  
Assembly Line ◽  
The State ◽  
Major Focus ◽  
Contemporary Culture ◽  
Russian Culture ◽  
Cultural Paradigm ◽  
Production And Consumption ◽  
Methods And Techniques

The article polemicizes about the state of Russian Postmodernist culture in general and the country’s Postmodernist literature, in particular. The author finds that contemporary culture exists at the intersection of two paradigms: a dwindling Postmodernism and a nascent Metamodernism, giving rise to new literary vectors and phenomena. Mass culture appropriates Postmodernist methods and techniques: irony, intertextuality, and play-mode rethinking of classical subjects and ideas. The author observes a transformation of Postmodernism into an assembly line for mass production and consumption. At the same time, Metamodernism inevitably becomes an alternative cultural paradigm. Analyzing the cultural situation, the author references works by the writer V. Pelevin (his novels Generation P, iPhuck 10), rapper poet Oxxxymiron (M. Fyodorov), and other prominent figures of modern Russian culture. The article’s major focus is on Postmodernist irony.

scholarly journals Fast Assembly Tolerance Inspection Method Using Feature-Based Adaptive Scale Reduction in Automatic Assembly Line

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 113860-113877
Author(s):  
Ci He ◽  
Lemiao Qiu ◽  
Shuyou Zhang ◽  
Zili Wang ◽  
Yang Wang
Keyword(s):  
Assembly Line ◽  
Automatic Assembly ◽  
Inspection Method ◽  
Assembly Tolerance ◽  
Scale Reduction ◽  
Feature Based

What Is Happening to Man's Work? (Excerpts): (Où Va le Travail Humain?)

1954 ◽  
Vol 13 (4) ◽  
pp. 29-33 ◽  
Author(s):  
Georges Friedmann ◽  
Charles Walker
Keyword(s):  
Social Organization ◽  
Mass Production ◽  
Assembly Line ◽  
Psychological Effects ◽  
Line Production ◽  
Human Organization ◽  
The Social ◽  
Line Work ◽  
Productive Systems

(Translator's Introduction: Professor Friedmann's earlier thinking on the effects of mass production jobs on men at work were made known to the readers of Human Organization (see Volume 12, Number 4, 1954) in the article called "Outline for a Psycho-Sociology of Assembly Line Work." This article originally appeared in the Journal de Psychologic Normal et Pathologique (Paris: Presses Universitaires de France, 1948). In his article Friedmann described the technical rationale of assembly line production and related this rationale to the social organization and the psychological effects of modern productive systems on workers.

scholarly journals AN EMPIRICAL STUDY ON THE CONROL OF REJECTION RATE IN INSTRUMENT CLUSTER ASSEMBLY LINE BY USING QUALITY CONTROL TOOLS AND KAIZEN

2020 ◽  
Vol 7 (9) ◽  
pp. 14-23
Author(s):  
G. Manoj ◽  
J. Niresh
Keyword(s):  
Quality Control ◽  
Mass Production ◽  
Lean Manufacturing ◽  
Assembly Line ◽  
Lean Production ◽  
Cost Savings ◽  
Rejection Rate ◽  
Cluster Assembly ◽  
Instrument Cluster ◽  
Advantages And Disadvantages

In today’s competitive world, any organization has to do mass production but mass production has both advantages and disadvantages. More rejection and more waste formation occurs in mass production. Further wastage leads to decreases in productivity and improvements. Lean production leads to minimizing the wastes and also improving the productivity. Hence profits would be considerably increased and further improvements takes place. Lean production has several benefits over mass production. It reduces the storage area and also helps in cost savings. Quality control tools played an important role in industrial engineering. They use 7 different tools to find the root cause for the defects and also prioritize it. Why – why analysis used to find the causes for the problem in accurate manner. Lot of questions arises which paved the way for the solutions to solve the problems. Kaizen culture should be encouraged. We must conduct Kaizen event weekly to motivate the workers by providing increments and gifts and also share the new ideas among our industrial peoples. Lean manufacturing brings less inventory, less material wastage than other methods. Flow of materials should be properly maintained. This paper discuss about how to control the rejection rate in instrument cluster assembly line by using the seven Quality control tools and the famous Kaizen (Lean technique).

scholarly journals Analysis of Henry Ford’s contribution to production and management

Pomorstvo ◽  
2019 ◽  
Vol 33 (1) ◽  
pp. 33-45
Author(s):  
Nikola Tomac ◽  
Radoslav Radonja ◽  
Jasminka Bonato
Keyword(s):  
Vertical Integration ◽  
Mass Customization ◽  
Mass Production ◽  
Assembly Line ◽  
Ford Motor Company ◽  
Just In Time ◽  
Time Production ◽  
The World ◽  
Henry Ford ◽  
Mode Of Production

Henry Ford is widely known as the car constructor, the founder of the Ford Motor Company, the pioneer of mass production and the inventor of the moving assembly line, which many consider as the world’s greatest contribution to manufacturing. In 1908, Ford started production of the Ford Model T, which has become one of the most successful automobile in automotive history. But his contribution far surpasses these excellent accomplishments. What are not well known are Ford’s contributions to the just-in-time production, product platforming, mass customization, vertical integration, designs for maintainability, ergonomic considerations, employee management and other features of the manufacture. The Ford’s production system has become the characteristic American mode of production widespread all over the world.

Andy Warhol: Computational Thinking, Computational Process

Leonardo ◽  
2020 ◽  
Vol 53 (2) ◽  
pp. 179-182
Author(s):  
Marian Mazzone
Keyword(s):  
New Media ◽  
Mass Production ◽  
Assembly Line ◽  
Computational Thinking ◽  
Andy Warhol ◽  
Computational Process ◽  
Art Making ◽  
Media Arts ◽  
New Media Art ◽  
Form Generation

This article positions Andy Warhol as a model for computational thinking and art-making, linking him to concepts in new media art. Warhol's work is analyzed for its variability in form generation and output, both in painting and on the early Amiga computer. His work becomes a simulation of the abstraction of process and methods of production familiar to us in electronic computational art of today. Rather than seen as banal mass production on the modern assembly line, Warhol's work can be seen as inspiration for new media arts practitioners.

Energy, transport, and consumption in the Industrial Revolution

2019 ◽  
Vol 42 ◽  
Author(s):  
Joseph A. Tainter ◽  
Temis G. Taylor
Keyword(s):  
Mass Production ◽  
Industrial Revolution ◽  
Energy Transport ◽  
Underlying Assumption

Abstract We question Baumard's underlying assumption that humans have a propensity to innovate. Affordable transportation and energy underpinned the Industrial Revolution, making mass production/consumption possible. Although we cannot accept Baumard's thesis on the Industrial Revolution, it may help explain why complexity and innovation increase rapidly in the context of abundant energy.

Sign in / Sign up

Export Citation Format

Share Document