Effects of Custom-Made and Thread Dental Implant Systems on the Stress Distribution in Alveolar Bone: A 3-Dimensional Finite Element Analysis

2013 ◽  
Vol 475-476 ◽  
pp. 1487-1493 ◽  
Author(s):  
Xiao Zhang ◽  
Zhan Gong Xie ◽  
Wei Feng ◽  
Xian Shuai Chen ◽  
Jian Yu Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Dental Implant ◽  
Alveolar Bone ◽  
Element Analysis ◽  
Custom Made ◽  
Dimensional Finite Element ◽  
Stress And Deformation ◽  
Implant System

Aiming to investigate the effects of custom-made and thread dental implant systems on the stress distribution in alveolar bone using linear analysis of the finite element method (FEM). Two types of systems: the custom-made implant and the thread dental implant system, were studied using a three-dimensional finite element analysis (3D FEA). Comparing the parts of all systems for loading in different directions, the stress and deformation distribution in custom-made implant and alveolar bone are better than that in thread dental implant system. The analysis data definitely demonstrated the difference in stress and deformation distribution of components in different dental implant systems. Results show the custom-made implants are provided with more advantages and can be used in future experiment and clinical test.

FINITE ELEMENT ANALYSIS OF A DENTAL IMPLANT

2003 ◽  
Vol 15 (02) ◽  
pp. 82-85 ◽  
Author(s):  
SHYH-CHOUR HUANG ◽  
CHANG-FENG TSAI
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Element Model ◽  
Element Analysis ◽  
3 Dimensional ◽  
Dimensional Finite Element ◽  
The Stability ◽  
Stress Concentration Effect ◽  
Implant System

This paper presents results from using a 3-dimensional finite element model to assess the stress distribution in the bone, in the implant and in the abutment as a function of the implant's diameter and length. Increasing implant diameter and length increases the stability of the implant system. By using a finite element analysis, we show that implant length does not decrease the stress distribution of either the implant or the bone. Alternatively, however implant diameter increases reduce the stresses. For the latter case, the contact area between implant and bone is increased thus the stress concentration effect is decreased. Also, with increased implant diameter the bone loss is decreased and as a consequence the success rate is improved.

scholarly journals Relationships of Stresses on Alveolar Bone and Abutment of Dental Implant from Various Bite Forces by Three-Dimensional Finite Element Analysis

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Xiaoning Kang ◽  
Yiming Li ◽  
Yixi Wang ◽  
Yao Zhang ◽  
Dongsheng Yu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dental Implant ◽  
Alveolar Bone ◽  
Three Dimensional ◽  
Central Incisor ◽  
Element Analysis ◽  
Implant Abutment ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element

Occlusal trauma caused by improper bite forces owing to the lack of periodontal membrane may lead to bone resorption, which is still a problem for the success of dental implant. In our study, to avoid occlusal trauma, we put forward a hypothesis that a microelectromechanical system (MEMS) pressure sensor is settled on an implant abutment to track stress on the abutment and predict the stress on alveolar bone for controlling bite forces in real time. Loading forces of different magnitudes (0 N–100 N) and angles (0–90°) were applied to the crown of the dental implant of the left central incisor in a maxillary model. The stress distribution on the abutment and alveolar bone were analyzed using a three-dimensional finite element analysis (3D FEA). Then, the quantitative relation between them was derived using Origin 2017 software. The results show that the relation between the loading forces and the stresses on the alveolar bone and abutment could be described as 3D surface equations associated with the sine function. The appropriate range of stress on the implant abutment is 1.5 MPa–8.66 MPa, and the acceptable loading force range on the dental implant of the left maxillary central incisor is approximately 6 N–86 N. These results could be used as a reference for the layout of MEMS pressure sensors to maintain alveolar bone dynamic remodeling balance.

scholarly journals EFFECTS OF DENTAL IMPLANT LENGTH AND BONE QUALITY ON BIOMECHANICAL RESPONSES IN BONE AROUND IMPLANTS: A 3-D NON-LINEAR FINITE ELEMENT ANALYSIS

2005 ◽  
Vol 17 (01) ◽  
pp. 44-49 ◽  
Author(s):  
CHUN-LI LIN ◽  
YU-CHAN KUO ◽  
TING-SHENG LIN
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Dental Implant ◽  
Bone Quality ◽  
Cancellous Bone ◽  
Alveolar Bone ◽  
Element Analysis ◽  
Linear Finite Element ◽  
Implant System ◽  
Implant Length

The aim of this study was to evaluate the influence of implant length and bone quality on the biomechanical aspects in alveolar bone and dental implant using non-linear finite element analysis. Two fixture lengths (8 and 13mm) of Frialit-2 root-form titanium implants were buried in 4 types of bone modeled by varying the elastic modulus for cancellous bone. Contact elements were used to simulate the realistic interface fixation within the implant system. Axial and lateral (buccolingual) loadings were applied at the top of the abutment to simulate the occlusal forces. The simulated results indicated that the maximum strain values of cortical and cancellous bone increased with lower bone density. In addition, the variations of cortical bony strains between 13mm and 8mm long implants were not significantly as a results of the same contact areas between implant fixture and cortical bone were found for different implant lengths. Lateral occlusal forces significantly increased the bone strain values when compared with axial occlusal forces regardless of the implant lengths and bone qualities. Loading conditions were found as the most important factor than bone qualities and implant lengths affecting the biomechanical aspects for alveolar bone and implant systems. The simulated results implied that further understanding of the role of occlusal adjustment influencing the loading directions are needed and might affect the long-term success of an implant system.

scholarly journals Comparative Analysis of Stress and Deformation between One-Fenced and Three-Fenced Dental Implants Using Finite Element Analysis

2021 ◽  
Vol 10 (17) ◽  
pp. 3986
Author(s):  
Chia-Hsuan Lee ◽  
Arvind Mukundan ◽  
Szu-Chien Chang ◽  
Yin-Lai Wang ◽  
Shu-Hao Lu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Comparative Analysis ◽  
Stress Distribution ◽  
Dental Implant ◽  
Maximum Stress ◽  
Vertical Force ◽  
Element Analysis ◽  
Different Types ◽  
Stress And Deformation

Finite element analysis (FEA) has always been an important tool in studying the influences of stress and deformation due to various loads on implants to the surrounding jaws. This study assessed the influence of two different types of dental implant model on stress dissipation in adjoining jaws and on the implant itself by utilizing FEA. This analysis aimed to examine the effects of increasing the number of fences along the implant and to compare the resulting stress distribution and deformation with surrounding bones. When a vertical force of 100 N was applied, the largest displacements found in the three-fenced and single-fenced models were 1.7469 and 2.5267, respectively, showing a drop of 30.8623%. The maximum stress found in the three-fenced and one-fenced models was 13.518 and 22.365 MPa, respectively, showing a drop of 39.557%. Moreover, when an oblique force at 35° was applied, a significant increase in deformation and stress was observed. However, the three-fenced model still had less stress and deformation compared with the single-fenced model. The FEA results suggested that as the number of fences increases, the stress dissipation increases, whereas deformation decreases considerably.

scholarly journals Three-Dimensional Finite Element Analysis of Stress Distribution in a Tooth Restored with Full Coverage Machined Polymer Crown

2021 ◽  
Vol 11 (3) ◽  
pp. 1220
Author(s):  
Azeem Ul Yaqin Syed ◽  
Dinesh Rokaya ◽  
Shirin Shahrbaf ◽  
Nicolas Martin
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Three Dimensional ◽  
Intraoral Scanner ◽  
Element Analysis ◽  
Dental Ceramic ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
Ceramic Crown

The effect of a restored machined hybrid dental ceramic crown–tooth complex is not well understood. This study was conducted to determine the effect of the stress state of the machined hybrid dental ceramic crown using three-dimensional finite element analysis. Human premolars were prepared to receive full coverage crowns and restored with machined hybrid dental ceramic crowns using the resin cement. Then, the teeth were digitized using micro-computed tomography and the teeth were scanned with an optical intraoral scanner using an intraoral scanner. Three-dimensional digital models were generated using an interactive image processing software for the restored tooth complex. The generated models were imported into a finite element analysis software with all degrees of freedom concentrated on the outer surface of the root of the crown–tooth complex. To simulate average occlusal load subjected on a premolar a total load of 300 N was applied, 150 N at a buccal incline of the palatal cusp, and palatal incline of the buccal cusp. The von Mises stresses were calculated for the crown–tooth complex under simulated load application was determined. Three-dimensional finite element analysis showed that the stress distribution was more in the dentine and least in the cement. For the cement layer, the stresses were more concentrated on the buccal cusp tip. In dentine, stress was more on the cusp tips and coronal 1/3 of the root surface. The conventional crown preparation is a suitable option for machined polymer crowns with less stress distribution within the crown–tooth complex and can be a good aesthetic replacement in the posterior region. Enamic crowns are a good viable option in the posterior region.

Sign in / Sign up

Export Citation Format

Share Document