Topology Algorithm of Power Network Based on Breadth-First-Search

2014 ◽  
Vol 556-562 ◽  
pp. 4591-4595
Author(s):  
Lin Wei Li ◽  
Xing He Ma ◽  
Lian Ming Zhang
Keyword(s):  
Network Topology ◽  
Traditional Method ◽  
New Method ◽  
Power Network ◽  
Breadth First Search ◽  
Slow Speed ◽  
Adjacency List ◽  
Network Connection ◽  
Electric Equipment ◽  
Low Efficiency

Aiming at the defects of repeating searching the path, low efficiency and the slow speed of the traditional topology algorithm, proposes a network topology algorithm based on Breadth-First-Search in this paper.Introduces the topology modeling method,and the electric equipment is abstracted into nodes and branches,making the topology process not constrained by the network connection and structure,enhancing universal property of the algorithm.Then introduces the traditional method, and analysises the disadvantages. At the same time,puts forward a new method. Uses node-branch adjacency list in the new method,which improves the topology speed.When the local switch information is changed, can modify the node-branch adjacency list to conduct the local re-topology,so it improves the topology flexibility. Finally, through the example, proves the superiority and practicability of this algorithm.

A New Method of Battlefield Situation Collaborative Plotting Based on Ontology

2014 ◽  
Vol 513-517 ◽  
pp. 1365-1371 ◽  
Author(s):  
Wei Feng Shan ◽  
Ji Wen Zhou ◽  
Hong Jie Dai ◽  
Peng Wang
Keyword(s):  
New Method ◽  
Semantic Mapping ◽  
Prototype System ◽  
Slow Speed ◽  
Ontology Construction ◽  
Client Server ◽  
Mapping Problem ◽  
Ontology Integration ◽  
Similarity Calculation ◽  
Low Efficiency

Due to the diversity of the situation information collected in the battlefield, and the conventional way of plotting runs with low efficiency and slow speed. This paper bring forward a new method of battlefield situation collaborative plotting based on ontology, which improves the integration plotting efficiency by formulating the local ontology construction. And based on the local ontology character constructed, solved the semantic mapping problem in the process of rapid ontology integration with a new similarity calculation algorithm.In the end this paper design a battlefield situation collaborative plotting prototype system based on client-server mode consequently.

New Method of Fault Knowledge Acquisition of Electronic Equipment

2014 ◽  
Vol 496-500 ◽  
pp. 931-934
Author(s):  
Zhi Cheng Huo ◽  
Qi Shun Sun ◽  
Feng Jun Qi ◽  
Guo Bao Ding
Keyword(s):  
Knowledge Acquisition ◽  
Electronic Equipment ◽  
New Method ◽  
Topological Information ◽  
Amplifier Circuit ◽  
C Language ◽  
Transistor Amplifier ◽  
Analog System ◽  
Non Linear ◽  
Electric Equipment

For the problems like discreteness, tolerance, non-linear of the parts, acquiring the fault knowledge of analog system in electric equipment is hard. This method realized the process of KA automatization through the combination of PSPICE software and C language and taking command lines as combining site. Using the batch file, the programs will form some topological information and parameter information about the fault states of a circuit system each time. The result of a experiment about an Basic Transistor Amplifier circuit proves its feasibility.

Improved Method Based on Fluid Mechanics Analysis for Buoy Gauge Design and Experimental Research

2012 ◽  
Vol 163 ◽  
pp. 133-137
Author(s):  
Ao Yu Chen ◽  
Xu Dong Pan ◽  
Guang Lin Wang
Keyword(s):  
Fluid Mechanics ◽  
Experimental Research ◽  
Traditional Method ◽  
New Method ◽  
Improved Method ◽  
Advanced Method ◽  
Inner Surface ◽  
Mechanics Analysis ◽  
Linear Property

Traditional method of buoy gauge design is rather complicated, so an advanced method by building and solving fluid mechanics equations is proposed in this paper. The curve of the taper pipe inner surface is calculated, according to different buoy gravity and diameter. In order to examine the effect of this improved method, an experiment is carried out. Results show that linear property of the buoy gauge improved by new method is excellent.

Storage Mechanism of Processing Magnanimity Small Files Applying HDFS Architecture

2013 ◽  
Vol 765-767 ◽  
pp. 1614-1617
Author(s):  
Wang Xin ◽  
Jun Ma
Keyword(s):  
Reading Time ◽  
New Method ◽  
Storage Mechanism ◽  
Application Architecture ◽  
Reading Efficiency ◽  
Low Efficiency

Pointing at the low efficiency problem of I/O operations of small files using HDFS application architecture, this article proposes a new method, that is, add disk buffer on DataNode to reduce addressing time of reading small files, and thus reduce reading time, and reduce the stress bringed by frequent NameNode access, so as to optimize the reading efficiency of small files. Experiment results show that the design programme is feasible, and adding disk buffer benefits for increasing efficiency of processing small files applying HDFS.

New Method for Measuring Liquid Level in WFGD System

2011 ◽  
Vol 418-420 ◽  
pp. 1804-1807
Author(s):  
Li Li ◽  
Zheng Hui Tan ◽  
Jia Wen Liu
Keyword(s):  
Flue Gas ◽  
Traditional Method ◽  
Large Deviation ◽  
Flue Gas Desulfurization ◽  
New Method ◽  
Liquid Level ◽  
Test Results ◽  
Economic Operation ◽  
Local Test ◽  
Operation Cost

Traditional method for measuring liquid level of absorption tower in wet flue gas desulfurization (WFGD) system is introduced in this paper, and it's found that measuring accuracy of the method exists in large deviation. A new method is proposed to measure liquid level of absorption tower for this situation. The local test results show that not only measurement result of new method is more close to the actual liquid level than traditional method, but also using new method can save operation cost and ensure the safety, stability, and economic operation of WFGD system.

scholarly journals Flipping The Classroom: How Reversing Teaching-Learning Process Can Improve Learner’s Comprehension in Learning Foreign Language

Humaniora ◽  
2014 ◽  
Vol 5 (2) ◽  
pp. 1114
Author(s):  
Wishnoebroto Wishnoebroto
Keyword(s):  
Foreign Language ◽  
Learning Process ◽  
Traditional Method ◽  
New Method ◽  
Flipped Learning ◽  
Western Countries ◽  
The Us ◽  
Classroom Lesson ◽  
Teaching Learning

Flipping a classroom is not only recording classroom lesson into a video and bringing homework into the classroom. It is a whole new method with a lot better result compared to the traditional method. In western countries such as the US, flipping a classroom is already becoming a new method adopted by many different schools and universities. This paper tries to explore the possibility of flipping a classroom for learning foreign language at BINUS University by comparing it with the recent practices and findings in the western countries. After the analysis it can be concluded that this method can be applied at BINUS University but on several conditions such as the improvement of infrastructures, and the teacher’s awareness and understanding to optimize their understanding about flipped learning. 

scholarly journals Optimal Network Alignment with Graphlet Degree Vectors

2010 ◽  
Vol 9 ◽  
pp. CIN.S4744 ◽  
Author(s):  
Tijana Milenković ◽  
Weng Leong Ng ◽  
Wayne Hayes ◽  
NatašA PržUlj
Keyword(s):  
Cost Function ◽  
Network Topology ◽  
Biological Networks ◽  
Phylogenetic Trees ◽  
Biological Function ◽  
Network Alignment ◽  
New Method ◽  
Biological Information ◽  
Global Alignment ◽  
Sequence Alignments

Important biological information is encoded in the topology of biological networks. Comparative analyses of biological networks are proving to be valuable, as they can lead to transfer of knowledge between species and give deeper insights into biological function, disease, and evolution. We introduce a new method that uses the Hungarian algorithm to produce optimal global alignment between two networks using any cost function. We design a cost function based solely on network topology and use it in our network alignment. Our method can be applied to any two networks, not just biological ones, since it is based only on network topology. We use our new method to align protein-protein interaction networks of two eukaryotic species and demonstrate that our alignment exposes large and topologically complex regions of network similarity. At the same time, our alignment is biologically valid, since many of the aligned protein pairs perform the same biological function. From the alignment, we predict function of yet unannotated proteins, many of which we validate in the literature. Also, we apply our method to find topological similarities between metabolic networks of different species and build phylogenetic trees based on our network alignment score. The phylogenetic trees obtained in this way bear a striking resemblance to the ones obtained by sequence alignments. Our method detects topologically similar regions in large networks that are statistically significant. It does this independent of protein sequence or any other information external to network topology.

Design of Digital Single-Phase Full-Bridge Invert Controller Based on TMS320F28027

2013 ◽  
Vol 448-453 ◽  
pp. 2137-2142
Author(s):  
Xiao Jian Ye ◽  
Zhen Gang Duan ◽  
Zhuo Shen ◽  
Xiao Qin Lian ◽  
Xiao Li Zhang
Keyword(s):  
Direct Current ◽  
Traditional Method ◽  
Single Phase ◽  
Sine Wave ◽  
New Method ◽  
Digital Controller ◽  
Duty Ratio ◽  
Current Signal ◽  
Wave Signal ◽  
Stable Performance

This paper elaborates a method to realize the single phase full bridge inverter digital controller based on DSP TMS320F28027 and gives the design scheme of both its hardware and its software. In accordance with SPWM duty ratio parameter calculated with DSP algorithm, utilizing the EPWM module on DSP, it finally attains the inverting control from direct current signal to sine wave signal. Compared with traditional method, this new method improves the output waveform effectively and shows stable performance.

Sign in / Sign up

Export Citation Format

Share Document