Design of the IDCTMV Human-Machine Ergonomics Test System

2014 ◽  
Vol 599-601 ◽  
pp. 900-903
Author(s):  
Quan Wang ◽  
Wei Ping Liu ◽  
Yi Jin ◽  
Bin He Fu
Keyword(s):  
Reaction Time ◽  
Subjective Evaluation ◽  
Test System ◽  
Test Methods ◽  
Operation Performance ◽  
Operation Procedure ◽  
Simulated Test ◽  
Control Terminal ◽  
And Control ◽  
Integrated Display

This paper presented the scenario of the IDCTMV Human-Machine Ergonomics test system with the programming idea of the modularization. Based on LabVIEW, the IDCTMV simulated test software and subjective evaluation software were designed and developed. The subjective evaluation results and operation performance data including the reaction time of crews, the rate of errors, and the rate of over reports were tested by the simulation of the integrated display and control terminal for the typical operation procedure, which solved the problems of lacking test methods for the study of the IDCTMV Human-Machine Ergonomics.

scholarly journals New Approach to Interpreting Seizure Tests on the Translatory Oscillation Tribometer (SRV)

Lubricants ◽  
2019 ◽  
Vol 7 (11) ◽  
pp. 93
Author(s):  
Gregor Patzer ◽  
Raj Shah ◽  
Ameneh Schneider ◽  
Philip Iaccarino
Keyword(s):  
Coefficient Of Friction ◽  
Test System ◽  
Test Methods ◽  
Adhesive Failure ◽  
Friction Testing ◽  
Reduced Parameters ◽  
The Coefficient Of Friction ◽  
The One ◽  
Drive And Control ◽  
And Control

When looking in detail at analyses of the tribological load-carrying capacity of lubricants, it becomes apparent that an exclusive evaluation of the development of the coefficient of friction cannot provide any sufficient criteria for determining the occurrence of adhesive failure. This is due on the one hand to the increasing complexity of lubricant formulae, and on the other hand to the increasing power capacity of modern drive and control concepts in the construction of tribometers. For this reason, it is urgently needed to examine the adhesive processes and their detection in more detail with the help of appropriate tribological values and criteria. The evolution of the friction can be coupled with the stroke, contact resistance, and other parameters. Besides, from new criteria for adhesive failure, which were compiled by the workgroup for the relevant ISO, DIN, and ASTM standards, this contribution discusses the inclusion of additional parameters. The SRV® test system—where SRV stands for the German acronym for oscillation, friction, and wear—is one that was developed to analyze adhesive failure from many measurements alongside the coefficient of friction. Testing with the SRV® system is done via step tests with standardized procedures and parameters, which are in accordance with ASTM test methods. The system continuously monitors electrical resistance, zero stroke position signals, temperature, and other measurements, and can derive further parameters that also help to identify adhesive failure and other adhesive events. These dimensionally reduced parameters can provide new insight on the mechanism of the adhesive behavior. This paper aims to discuss how the interpretation of these step tests beyond the development of coefficient of friction can lead to new knowledge and insight in tribological research, and explores the applicability of Stribeck’s theory to the oscillatory and reciprocating motion utilized in the SRV® tribometer.

Competency management of laboratory personnel using LIMS

2020 ◽  
Vol 10 (6) ◽  
pp. 636-641
Author(s):  
Konstantin S. Varaksin ◽  
◽  
Artem S. Makarov ◽  
Alexander Y. Lyapin ◽  
◽  
...  
Keyword(s):  
Quality Management ◽  
Management System ◽  
Quality Management System ◽  
Information Management System ◽  
Test System ◽  
Test Methods ◽  
Laboratory Activities ◽  
Resource Requirements ◽  
Laboratory Workers ◽  
Competence Test

The updated edition of the ISO/IEC 17025 standard introduced significant changes to the structure, terminology, resource requirements, processes, quality management system of testing and calibration laboratories. New requirements were established for the organization of laboratory activities – a process approach and risk-based thinking, which provides for a reduction in part of the prescriptive requirements and the introduction of requirements based on the analysis of the performance of actions. In accordance with GOST ISO IEC 17025-2019, the laboratory must authorize personnel to perform specific laboratory activities, as well as guarantee their competence. This article discusses the organization of the competence management system for the personnel of the laboratories of the organizations of Transneft system using the laboratory information management system (LIMS). The model of the process implementation has been described. It has been established that the competence test system allows you to regularly monitor the skills and knowledge of laboratory workers both in terms of the elements of the Quality Management System and in the applied measurement (test) methods. The personnel responsibility matrix implemented in LIMS regulates the powers and functionality of employees, ensuring that employees are allowed to perform work in accordance with their competence. The functions implemented in LIMS made it possible to automate the management of the competence of laboratory workers in accordance with the requirements of GOST ISO/IEC 17025-2019 and other regulatory documents.

The Design and Realization of Display and Control Terminal for Radar Echo Simulator

2013 ◽  
Vol 347-350 ◽  
pp. 1116-1120
Author(s):  
Heng Jiang ◽  
Jing Liu
Keyword(s):  
Data Communication ◽  
Visual Task ◽  
Essential Factor ◽  
Radar Echo ◽  
Display Function ◽  
Control Terminal ◽  
And Control

In order to raise the train effect of radar operation efficiently, offer detailed, accurate, visual task situation information, high limit decreases or eliminates to train distorted and operating fault. The paper have put forward a kind of based on GDI + graph display function and USB data communication display the realization method of controlling terminal, Have realized for radar display relatively lifelike imitate, The interface that imitated has included actual radar, is major to display essential factor.

Development of a Ring Permeability Test System

2010 ◽  
Vol 136 ◽  
pp. 153-157
Author(s):  
Yu Hong Du ◽  
Xiu Ming Jiang ◽  
Xiu Ren Li
Keyword(s):  
Control System ◽  
Control Method ◽  
Dynamic Performance ◽  
Experimental Tests ◽  
Measuring Method ◽  
Test System ◽  
Fluid Theory ◽  
And Control ◽  
Relationship Of ◽  
The Mathematical Model

To solve the problem of detecting the permeability of the textile machinery, a dedicated test system has been developed based on the pressure difference measuring method. The established system has a number of advantages including simple, fast and accurate. The mathematical model of influencing factors for permeability is derived based on fluid theory, and the relationship of these parameters is achieved. Further investigations are directed towards the inherent characteristics of the control system. Based on the established model and measuring features, an information fusion based clustering control system is proposed to implement the measurement. Using this mechanical structure, a PID control system and a cluster control system have been developed. Simulation and experimental tests are carried out to examine the performance of the established system. It is noted that the clustering method has a high dynamic performance and control accuracy. This cluster fusion control method has been successfully utilized in powder metallurgy collar permeability testing.

scholarly journals Virtual Digital Substation Test System and Interoperability Assessments

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2337
Author(s):  
Linwei Chen ◽  
Haiyu Li ◽  
Thomas Charton ◽  
Ray Zhang
Keyword(s):  
Test System ◽  
Communication Services ◽  
Iec 61850 ◽  
Analysis Tools ◽  
Information Models ◽  
Digital Substation ◽  
Interoperability Testing ◽  
Automation And Control ◽  
And Control ◽  
Intelligent Electronic Devices

Interoperability testing and analysis tools provide a means for achieving and assuring the integrity of multivendor intelligent electronic devices (IEDs) data exchanges. However, the testing and analysis are very time consuming and error prone, and these problems worsen when a substation becomes large and complex during the engineering process, commission, replacement, maintenance, and extension. To address this challenge, this paper presents a virtual digital substation test system (VDSTS) with interoperability analysis tools for assessing and identifying the engineering challenges for the multiple-vendors digital substation. This VDSTS consists of three parts: (i) A virtual digital substation modelling for generating real-time digital substation primary plant operation and fault conditions, (ii) a standard IEC 61850-based substation protection, automation, and control (PAC) system architecture with multivendor IEDs and bay solutions, and (iii) multivendor Substation Configuration description Language (SCL) tools and in-house built data visualisation tool. The study focuses on the interoperability testing of sampled values (SV), generic object-oriented substation events (GOOSE), and manufacturing message specification (MMS) communication services, as defined in IEC 61850. The main issues identified are compatibility issues of SCL tools, protocol implementation issues, different information models, and application limitations. The outcomes will help utilities to reduce the risks associated with the general rollout of digital substations.

Sign in / Sign up

Export Citation Format

Share Document