Research on Low-Voltage Arc Fault Detection Based on BP Neural Network

2014 ◽  
Vol 651-653 ◽  
pp. 499-502 ◽  
Author(s):  
Ren Cheng Zhang ◽  
Kai Yang ◽  
Qi Yong Wu ◽  
Jian Hong Yang
Keyword(s):  
Neural Network ◽  
Working Conditions ◽  
Bp Neural Network ◽  
Detection Method ◽  
Low Voltage ◽  
Chain Code ◽  
Experimental Platform ◽  
Low Voltage Circuits ◽  
Set Up ◽  
In Virtue Of

In electrical fires, arc fault is one of the important reasons. In virtue of cross talk, randomness and weakness of arc faults in low-voltage circuits, very few of techniques have been well used to protect loads from all arc faults. Thus, a novel detection method based on BP neural network was developed in this paper. When arc faults occur in circuits, current integrations of cycles were variable and erratic. However, current integrations of cycles would also vary while the working conditions of circuits change. To better discriminate the current integrations, four characteristics were extracted to represent their differences through chain code. Based on these characteristics, BP neural network was used to distinguish arc faults from normal operations. The validity of the developed method was verified via an experimental platform set up. The results show that arc faults are well detected based on the developed method.

scholarly journals Rolling Bearing Fault Prediction Method Based on QPSO-BP Neural Network and Dempster–Shafer Evidence Theory

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1094 ◽  
Author(s):  
Lanjun Wan ◽  
Hongyang Li ◽  
Yiwei Chen ◽  
Changyun Li
Keyword(s):  
Neural Network ◽  
Working Conditions ◽  
Bp Neural Network ◽  
Evidence Theory ◽  
Prediction Method ◽  
Rolling Bearing ◽  
Fault Prediction ◽  
Fault Classification ◽  
Bearing Fault ◽  
Hidden Layer

To effectively predict the rolling bearing fault under different working conditions, a rolling bearing fault prediction method based on quantum particle swarm optimization (QPSO) backpropagation (BP) neural network and Dempster–Shafer evidence theory is proposed. First, the original vibration signals of rolling bearing are decomposed by three-layer wavelet packet, and the eigenvectors of different states of rolling bearing are constructed as input data of BP neural network. Second, the optimal number of hidden-layer nodes of BP neural network is automatically found by the dichotomy method to improve the efficiency of selecting the number of hidden-layer nodes. Third, the initial weights and thresholds of BP neural network are optimized by QPSO algorithm, which can improve the convergence speed and classification accuracy of BP neural network. Finally, the fault classification results of multiple QPSO-BP neural networks are fused by Dempster–Shafer evidence theory, and the final rolling bearing fault prediction model is obtained. The experiments demonstrate that different types of rolling bearing fault can be effectively and efficiently predicted under various working conditions.

Fault Detection for an Aileron Actuator under Variable Conditions Based on Bi-Step Neural Network

2015 ◽  
Vol 764-765 ◽  
pp. 740-746
Author(s):  
Hang Yuan ◽  
Chen Lu ◽  
Ze Tao Xiong ◽  
Hong Mei Liu
Keyword(s):  
Neural Network ◽  
Fault Detection ◽  
Simulation Model ◽  
Working Conditions ◽  
Detection Method ◽  
Fault Tolerant ◽  
Adaptive Threshold ◽  
Residual Error ◽  
The Other ◽  
Aerodynamic Loads

Fault detection for aileron actuators mainly involves the enhancement of reliability and fault tolerant capability. Considering the complexity of the working conditions of aileron actuators, a fault detection method for an aileron actuator under variable conditions is proposed in this study. A bi-step neural network is utilized for fault detection. The first neural network, which is employed as the observer, is established to monitor the aileron actuator and generate the residual error. The other neural network generates the corresponding adaptive threshold synchronously. Faults are detected by comparing the residual error and the threshold. In considering of the variable conditions, aerodynamic loads are introduced to the bi-step neural network. The training order spectrums are designed. Finally, the effectiveness of the proposed scheme is demonstrated by a simulation model with different faults.

Geological Adaptive Cutterhead Selection for EPB Shield Based on BP Neural Network

2014 ◽  
Vol 607 ◽  
pp. 118-123
Author(s):  
Lai Kuang Lin ◽  
Yi Min Xia ◽  
Fei He ◽  
Qing Song Mao ◽  
Kui Zhang
Keyword(s):  
Neural Network ◽  
Bp Neural Network ◽  
Earth Pressure ◽  
Training Model ◽  
Structure Design ◽  
Pressure Balance ◽  
Selection For ◽  
Earth Pressure Balance ◽  
Set Up ◽  
Epb Shield

In view of complex and fuzziness of geological adaptive cutterhead selection for earth pressure balance (EPB) shield, a cutterhead selection method based on BP neural network is put forward. Considering the structure characteristics of EPB shield cutterhead, typical cutterhead types are classified and summarized based on cutterhead topology structure and number of spokes. After analyzing the determinants of cutterhead selection, one-to-many mapping relation between cutterhead type and geological parameters is put forward, and then core geologic parameters related to cutterhead selection are concluded. The feasibility of using neural network method to choose the cutterhead type is analyzed, and a BP neural network training model for cutterhead selection is set up and tested in testing sample data. The result shows that the selected cutterhead and the construction cutterhead are basically consistent. The feasibility of this method is proved and it can be theoretical basis for the cutterhead structure design which will improve scientific of cutterhead selection.

A RBF Neural Network Approach for Fitting Creep Curve of Sandstone

2010 ◽  
Vol 171-172 ◽  
pp. 274-277
Author(s):  
Yun Liang Tan ◽  
Ze Zhang
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Creep Curve ◽  
Bp Neural Network ◽  
Rbf Neural Network ◽  
Reference Value ◽  
Network Approach ◽  
Neural Network Approach ◽  
Training Time ◽  
Set Up

In order to quest an effective approach for predicate the rheologic deformation of sandstone based on some experimental data, an improved approaching model of RBF neural network was set up. The results show, the training time of improved RBF neural network is only about 10 percent of that of the BP neural network; the improved RBF neural network has a high predicating accuracy, the average relative predication error is only 7.9%. It has a reference value for the similar rock mechanics problem.

Prediction Model of Flow-Induced Noise in Large-Scale Centrifugal Pumps Based on BP Neural Network

2017 ◽  
Author(s):  
Chang Guo ◽  
Ming Gao ◽  
Peixin Dong ◽  
Yuetao Shi ◽  
Fengzhong Sun
Keyword(s):  
Neural Network ◽  
Network Model ◽  
Working Conditions ◽  
Bp Neural Network ◽  
Centrifugal Pumps ◽  
Output Layer ◽  
Sample Data ◽  
Input Layer ◽  
Flow Induced Noise ◽  
Hidden Layer

As one kind of serious environmental problems, flow-induced noise in centrifugal pumps pollutes the working circumstance and deteriorates the performance of pumps, meanwhile, it always changes drastically under various working conditions. Consequently, it is extremely significant to predict flow-induced noise of centrifugal pumps under various working conditions with a practical mathematical model. In this paper, a three-layer back propagation (BP) neural network model is established and the number of input, hidden and output layer node is set as 3, 6 and 1, respectively. To be specific, the flow rate, rotational speed and medium temperature are chosen as input layer, and the corresponding flow-induced noise evaluated by average of total sound pressure level (A_TSPL) as output layer. Furthermore, the tansig function is used to act as transfer function between the input layer and hidden layer, and the purelin function is used between hidden layer and output layer. The trainlm function based on Levenberg-Marquardt algorithm is selected as the training function. By using a large number of sample data, the training of the network model and prediction research are accomplished. The results indicate that good correlation is established among the sample data, and the predictive values show great consistence with simulation ones, of which the average relative error of A_TSPL in process of verification is 0.52%. The precision of the model can satisfy the requirement of relevant research and engineering application.

Use BP Neural Network Set up the Corrosion Prediction Model of Low Temperature Parts of Atmospheric Pressure Device

2012 ◽  
Vol 152-154 ◽  
pp. 1138-1142 ◽  
Author(s):  
Yu Guang Fan ◽  
Zai Dong Piao ◽  
Bing Chen ◽  
Hong Xian Lin ◽  
Yang Yang
Keyword(s):  
Neural Network ◽  
Low Temperature ◽  
Prediction Model ◽  
Corrosion Protection ◽  
Bp Neural Network ◽  
Atmospheric Pressure ◽  
Ph Value ◽  
Set Up

In research of the low temperature parts of atmospheric pressure device, by using BP neural network, the connection of PH value, Cl-, H2S and Fe+2 was setup which can predict Fe+2 content accurately, and obtain the requirement accuracy, hence more accurate corrosion can be predicted and providing more suggests for corrosion protection.

Sign in / Sign up

Export Citation Format

Share Document